• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.3
• /
• pp.186-194
• /
• 2017

In this paper, we analyze the main performance of satellite's Synthetic Aperture Radar system for high resolution and wide swath. We have used the radiation pattern of reflector antenna with array feed and comparison between the conventional ScanSAR mode and SweepSAR mode has been carried out. The SweepSAR mode is a high-resolution wide-swath mode that transmits beams over a wide range and receives echo signals through sequential beamforming based on SCORE(SCan On REceive). In this paper, we analyzed the operating principle and characteristics of satellite's SweepSAR mode and simulate system performances. In addition, in order to increase the utilization of image, performances analysis for multiple frequency bands(C-band, X-band) has been considered.

• Korean Journal of Remote Sensing
• /
• v.27 no.3
• /
• pp.303-314
• /
• 2011

Surface albedo is an important parameter of the surface energy budget, and its accurate quantification is of major interest to the global climate modeling community. Therefore, in this paper, we consider the direct solution of kernel based bidirectional reflectance distribution function (BRDF) models for retrieval of normalized reflectance of high resolution satellite. The BRD effects can be seen in satellite data having a wide swath such as SPOT/VGT (VEGETATION) have sufficient angular sampling, but high resolution satellites are impossible to obtain sufficient angular sampling over a pixel during short period because of their narrow swath scanning when applying semi-empirical model. This gives a difficulty to run BRDF model inferring the reflectance normalization of high resolution satellites. The principal purpose of the study is to estimate normalized reflectance of high resolution satellite (RapidEye) through BRDF components from SPOT/VGT. We use semi-empirical BRDF model to estimated BRDF components from SPOT/VGT and reflectance normalization of RapidEye. This study used SPOT/VGT satellite data acquired in the S1 (daily) data, and within this study is the multispectral sensor RapidEye. Isotropic value such as the normalized reflectance was closely related to the BRDF parameters and the kernels. Also, we show scatter plot of the SPOT/VGT and RapidEye isotropic value relationship. The linear relationship between the two linear regression analysis is performed by using the parameters of SPOTNGT like as isotropic value, geometric value and volumetric scattering value, and the kernel values of RapidEye like as geometric and volumetric scattering kernel Because BRDF parameters are difficult to directly calculate from high resolution satellites, we use to BRDF parameter of SPOT/VGT. Also, we make a decision of weighting for geometric value, volumetric scattering value and error through regression models. As a result, the weighting through linear regression analysis produced good agreement. For all sites, the SPOT/VGT isotropic and RapidEye isotropic values had the high correlation (RMSE, bias), and generally are very consistent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.868-877
• /
• 2011

In this paper, the feasibility of ORBCOMM satellite-based automatic identification system (SAT-AIS) is evaluated in the context of ship AIS slot collision probability depending on reporting rate, We evaluate detection probability evaluation of ORBCOMM satellite-based AIS considering link budget, SOTDMA protocol and satellite's swath width. The simulation determines the total number of vessels served by ORBCOMM satellite according to satellite's swath width, AIS slot allocation and reporting rate. By simulation results, the ORBCOMM satellite-based AIS slot collision is increased directly proportional to the total number of vessels and the more detection probability evaluation of ORBCOMM satellite-based AIS degrader, the more sip AIS reporting rate shorter.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.74-79
• /
• 2014

Conventional ScanSAR mode has been adopted in Envisat or Radarsat and played an important role to acquire wide swath SAR images for environmental surveillance. However, it suffers from the undesirable scalloping effect caused by non-homogeneity of antenna pattern while the image resolution is sacrificed. In recent years, TOPS mode has been suggested and put into use to overcome the disadvantages of the conventional scanning mode. Although TOPS mode is able to produce wide-swath SAR image in a short time interval, it demands highly complicated system design knowledge. In this paper, we present the operation principle of TOPS mode and a full SAR simulation is performed to generate TOPS SAR raw data. Azimuth antenna pattern is modified during TOPS mode operation and it is shown that the undesired scalloping effect is suppressed in the generated SAR image.

• Korean Journal of Remote Sensing
• /
• v.23 no.5
• /
• pp.431-437
• /
• 2007

Multi-Spectral Camera(MSC) on the KOMPSAT-2 satellite was developed and launched as a main payload to provide 1m of GSD(Ground Sampling Distance) for one(1) channel panchromatic imaging and 4m of GSD for four(4) channel multi-spectral imaging at 685km altitude covering l5km of swath width. Since the compression on MSC image chain was required to overcome the mismatch between input data rate and output date rate JPEG-like method was selected and analyzed to check the influence on the performance. In normal operation the MSC data is being acquired and transmitted with lossy compression ratio to cover whole image channel and full swath width in real-time. In the other hand the MSC performance have carefully been handled to avoid or minimize any degradation so that it was analyzed and restored in KGS(KOMPSAT Ground Station) during LEOP(Launch and Early Operation Phase). While KOMPSAT-2 had been developed, new compression method based upon wavelet for space application was introduced and available for next satellite. The study on improvement of image chain including new compression method is asked for next KOMPSAT which requires better GSD and larger swath width In this paper, satellite image chain which consists of on-board image chain and on-ground image chain including general MSC description is briefly described. The performance influences on the image chain between two on-board compression methods which are or will be used for KOMPSAT are analyzed. The differences on performance between two methods are compared and the better solution for the performance improvement of image chain on KOMPSAT is suggested.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1537-1549
• /
• 2020

The ground sample distance of KOMPSAT-3 is 0.7 m for panchromatic band, 2.8 m for multi-spectral band, and the swath width of KOMPSAT-3 is 16 km. Therefore, an image of an area wider than the swath width (16 km) cannot be acquired with a single scanning. Thus, after scanning multiple areas in units of swath width, the acquired images should be made into one image. At this time, the necessary algorithm is called image mosaicking or image stitching, and is used for cartography. Mosaic algorithm generally consists of the following 4 steps: (1) Feature extraction and matching, (2) Radiometric balancing, (3) Seamline estimation, and (4) Image blending. In this paper, we have studied an effective seamline estimation method for satellite images. As a result, we can estimate the seamline more accurately than the existing method, and the heterogeneity of the mosaiced images was minimized.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.131-141
• /
• 2014

Synthetic Aperture Radar (SAR) is a powerful and well established microwave remote sensing technique which enables high resolution measurements of the Earth surface independent of weather conditions and sunlight illumination. In this study, this paper first summarizes the basic SAR theory and the history of the SAR satellites. The second part of this paper gives an overview of new technologies for future SAR systems. New innovative concepts and technologies for SAR satellites will be digital beamforming, High Resolution Wide Swath (HRWS), Waveform Encoding, Terrain Observation by Progressive Scan (TOPS), and so on. These technologies will play an important role for future spaceborne SAR satellites.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.663-663
• /
• 2002

The National Oceanographic Research Institute of KOREA started to survey for the basic data necessary to territorial sea and EEZ identification and marine development with Multi-Beam Echo Sounder(L3 SeaBeam 2112) since 1996. The Multi-Beam surveys has provided a very new and precise way of describing the morphology and nature of the underwater seabed. Multi-Beam Echo Sounder systems employ sound waves propagating at angles which vary from vertical to nearly horizontal. The locations on the bottom where echoes are generated cover a swath whose port to starboard width may be equal to many times the water depth. Newer Multi-beam bathymetric sonars provide both a beam by beam depth and backscatter amplitude of the bottom. But The backscattered amplitude didn't use for identification of bottom properties because backscatter amplitude effects by the many environmental variables of underwater and seabed. We investigates the utilization of geo-referenced backscatter amplitude and analysis of relationship between The Backscattered Amplitude and Sidescan Sonar imagery from Sea Beam 2112. For the backscattered amplitude imagery mainly represents the properties of sediment, we computed the beam geometry, time-varied amplifier gain, and mainly incidence angle to the topography using bathymetric model at each ping. In this paper, those issues are illustrated, and the angular independent imagery based on swath topographic model is described.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.390-393
• /
• 2006

It is well known that synthetic aperture radar (SAR) provides information on ocean winds and surface waves. SAR data are of particularly high value in extreme weather conditions, as radar is able to penetrate the clouds providing information on different ocean surface processes. In this presentation some recent results on SAR observation of extreme wind and ocean wave conditions is summarised. Particular emphasize is put on the investigation of typhoons and extratropical cyclones in the North Pacific. The study is based on the use of ENVISAT ASAR wide swath images. Wide swath and scansar data are well suited for a detailed investigation of cyclones. Several examples like, e.g., typhoon Talim will be presented, demonstrating that these data provide valuable information on the two dimensional structure of the both the wind and the ocean wave field. Comparisons of the SAR observation with parametric and numerical model data will be discussed. Some limitations of standard imaging models like, e.g., CMOD5 for the use in extreme wind conditions are explained and modifications are proposed. Finally the study summarizes the capabilities of new high resolution TerraSAR-X mission to be launched in October 2006 with respect to the monitoring of extreme weather conditions. The mission will provide a spatialresolution up to 1m and has full polarimetric capabilities.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.3
• /
• pp.19-28
• /
• 1995

This paper presents hull form design details and performance characteristics of the SWATH ship 'SEON JIN' built as an underwater test support ship. The hull form is developed systematically varing sets of 11 form parameters which define a unique hull under waterline. Using this geometry variation scheme we have generated a number of alternatives and selected the final hull which fulfills the design objectives and matches the design constraints. After selecting the final hull form we have investigated performances thoroughly through model tests, and confirmed through sea trials that the performance goals be achieved.