• ETRI Journal
• /
• v.36 no.6
• /
• pp.979-987
• /
• 2014

This paper describes new tactile feedback patterns and the effect of their input performance for a button GUI activated by a tap gesture on mobile touch devices. Based on an analysis of touch interaction and informal user tests, several tactile feedback patterns were designed. Using these patterns, three user experiments were performed to investigate appropriate tactile feedback patterns and their input performance during interaction with a touch button. The results showed that a tactile pattern responding to each touch and release gesture with a rapid response time and short falling time provides the feeling of physically clicking a button. The suggested tactile feedback pattern has a significantly positive effect on the number of typing errors and typing task completion time compared to the performance when no feedback is provided.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.496-499
• /
• 2015

The objective of the study is to develop selfie sticks to enhance portability and prevent error of pushing mobile phone button. The main target of selfie sticks is women and the size of selfie sticks is too big to put it in their bag. Also when people put mobile phone in a selfie stick, people push its button easily. Sometimes mobile phone is turned off or the volume is controlled because of pushing its button. The researcher focused on designing a solution that enhances portability and preventing error of pushing the button. The researcher understood structure of selfie stick. It consists of a mobile phone supporter and a length adjuster. The researcher designed the mobile phone supporter for enhancing portability and the length adjuster for preventing to push the mobile phone. The researcher designed a part which connects a mobile phone supporter with a length adjuster and made selfie stick fold. Also, sponges are partly put on the mobile supporter. It can reduce situation of pushing the mobile phone button. The selfie stick design from the study has an opportunity to distinguish using the product and carrying it and have people use the selfie stick conveniently.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.22-28
• /
• 2014

This paper presents the design and development of ECU simulator in order to verify automatic firmware update system of ECU SW on the vehicle. We designed and developed general-proposed ECU simulator as devide into HW and SW parts. HWadopt 32bit MPU, CAN, LIN, LCD, and touch-pad button to satisfy general-proposed ECU level. And SW constructed as finite-state-machine structure in order to support HW spec. We developed ECU manager which deliveries update data to verify validity of operation. And we tested ECU simulator with ECU manager. For test of validity of ECU simulator, we set 4 scenarios between ECU simulator and manager. As the result, we confirmed validity of operation in ECU simulator for automatic SW update system.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.595-603
• /
• 2013

Touchscreen is now installed in the majority of information devices thanks to the developed digital technology. In case of copiers, although touchscreen was installed earlier than any other information device, current user interface indicates that conventional methods have been maintained without any special re-validation. But, since common office devices such as copiers have brief usage time and clear, straightforward purposes, user experience between an user and device is perhaps an important element. Nevertheless, conservativeness of the market and the fact that users and buyers are not always the same are a stumbling block to actively changing UI. Recently, however, as hardware element, buttons, have moved to touchscreen mostly for smartphone, and common and public devices have seen rapid changes in UX, mostly with touchscreen, it has led to high demand for changes in UX of copiers. To remedy the issues with copiers, a literature review was conducted through existing studies and user evaluation based on user survey and prototype was done to examine the copier's UI elements and relevant changes in usage. In particular, a new direction for UX of copiers was suggested by analyzing the impact of differences between software button-oriented UI and hardware button-oriented UI on users and usability. This study findings could be used as basic data for improving the usability of future common devices including copier and UX design.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.1
• /
• pp.135-146
• /
• 2021

VMP(Variable Message Protocol) is bit-based variable message processing protocol that enables the sharing situation information in real time as a tactical datalink protocol for Korean Army. System A is currently under development and will be operated as an army system when its development is completed. In system A, the VMP processing terminal is mounted and the VMP is utilized for exchanging tactical information. System A can acquire situation information from mounted situation information acquisition system and share situation information with other system A by the VMP. In this paper, we propose a method of sharing situation information with system A and speed improvement methods of sharing situation information using VMP. As speed improvement methods of sharing situation information, this paper studied 'Removing Process of Sending VMP Observation Report', 'Adopting One-time Situation Information Send Button When Sharing A System Situation Information By VMP', 'Combination of Many VMP Messages Using Repeat Function Of Application Header'. And we conducted the experiment, the result was that the transmission speed of equipment to which the research method was applied was improved by 76.8% compared to the existing equipment.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.537-541
• /
• 2002

When a Kigong master concentrates the Qi at Yintang, Laogong(P8), Qihai(CV6) meridian points during Kigong state, the change of magnetic field around acupoints Yintang, Laogong points has been measured using DROS-SQUID apparatus. After smoothing process of the continuously measured magnetic signal around acupoints for a few minutes, we could observe that a series of peaks, magnitude of 1～2 pT and period of 5 sec, appeared and find that these peaks were clearly changed as if switch on and off according to Qi concentration state. Before Qi radiation, a series of the peaks measured on Yintang or Laogong point of a Kigong master shows one of either SW-ON state or SW-OFF state as initial state. During Qi radiation, its state becomes inverse of initial state. After Qi radiation, it returns to the initial state for some cases (called P type ; push button switch type) or it remains inversion state for other cases (called T type; toggle switch type). From the data of peaks measured at different position from the Qi concentration acupoint, we found that the Qi radiation on an acupoint makes the switching effect even not at the acupoint that Qi is concentrated but at the other acupoints that Qi is not concentrated.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.2
• /
• pp.145-156
• /
• 2017

Objective: This study aims to compare the usability of the adaptive touch design method with that of the height adjustable design method that are applied to the Korean QWERTY keyboard and Naratgul keyboard on smartphones, examine the results, and present practical implications. Background: Smartphone manufacturers have failed to satisfy every user with their uniform touch keyboard designs that do not consider the high use rates of keypad use. In reality, touch keyboard designing customized for every individual is impossible, but there need to be researches on was to improve usability by having touch areas changed automatically depending on user behaviors or having users adjust the keyboard height depending on their hand size. Method: As for the design methods, an object group was given smartphones with the adaptive touch design method and the other group those with the height adjustable design method. As they entered the same characters in the smartphones, typing error rates and text input speed were measured and the average values were compared. 35 individuals who would frequently use smartphones in daily life participated in the experiment. The group variable was the type of touch keyboards, and the test variables were typing error rates and text input speed, for which a T-test was implemented. Results: As for the QWERTY keyboard, the significant improvement effect was verified as the typing error rate of the adaptive touch design method was 4.21% but that of the height adjustable design method was 3.28% although there was no significant difference in terms of text input speed. As for the Naratgul keyboard, in contrast, the typing error rate of the adaptive touch design method was 2.5% while that of the height adjustable design method was 1.48%, which indicates a measure of improvement, but the effect was not significant. On the other hand, the text input speed per minute was improved as much as 22.2%, which is significant. Conclusion: First, the Korean touch keyboard usability of the adaptive touch design method and that of the height adjustable design method, when applied to Model A of Company L, showed significant difference from each other. Second, the height adjustable design method was applied to the QWERTY keyboard, the typing error rate was improved significantly. This indicates that as the keyboard height was raised, the number of buttons within the range of fingering decreased, decreasing the touch bias was reduced. Third, the height adjustable design method was applied to the Naratgul keyboard, the text input speed was improved. Application: When the QWERTY keyboard was applied to a smartphone as small as 5.5inch or less, it is highly probably that the height adjustable design method decreases the typing error rate. It may be considered to develop additional UX functions to make the keyboard font larger or give users the option to adjust button intervals in utilization of the SW advantages of the height adjustable design method.