• Structural Engineering and Mechanics
• /
• 제55권6호
• /
• pp.1203-1221
• /
• 2015

By taking a cable-stayed-suspension hybrid bridge with main span of 1400 m as example, seismic response of the bridge under the horizontal and vertical seismic excitations is investigated numerically by response spectrum analysis and time history analysis, its seismic performance is discussed and compared to the cable-stayed bridge and suspension bridge with the same main span, and considering the aspect of seismic performance, the feasibility of using cable-stayed-suspension hybrid bridge in super long-span bridges is discussed. Under the horizontal seismic action, the effects of structural design parameters including the cable sag to span ratio, the suspension to span ratio, the side span length, the subsidiary piers in side spans, the girder supporting system and the deck form etc on the seismic performance of the bridge are investigated by response spectrum analysis, and the favorable values of these design parameters are proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1622-1627
• /
• 2008

A suspension is a core part, determining running stability and riding quality of vehicles and its stiffness is essential parameters in the process of vehicle designing. Suspension stiffness shall be adjusted to meet requirements of running stability and curve running performance, as adding stiffness to primary suspension for running stability in high-speed running results running performance degradation in curved track. The purpose of the report lies in utilization of usable data for optimization of suspension via analyzing running performance through changing stiffness of railway vehicle suspension.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.364-371
• /
• 2008

In general Maglev (magnetically levitated vehicle) has about 4 or 5 bogies per one vehicle to improve stability of electromagnetic suspension and 4 air-spring per one bogie are to be equipped to prevent form excessive yawing and pitching motion of bogie. 3 leveling valve per one vehcile will be applied to control the height of carbody. This kind of vehicle is on the design stage, and design review will be carried out before manufacture. The suspension system of Maglev consists of 16 of air-spring, auxiliray reservoir and orifice, 3 leveling valve, which are different composition comparative to conventional rolling stock. To improve operational reliability of vehicle, additional ventilation valve will be equipped with airspring. This kind of new design concept requires fundamental design review. In this study, suspension systems of Maglev will be built as mathematical model. Then designed suspension system will be reviewed in view of various points through proposed suspension simulation.

• Bulletin of the Korean Chemical Society
• /
• 제4권5호
• /
• pp.212-217
• /
• 1983

Depending on the range of shear rates, temperatures and concentrations, the potato starch suspension in water behaves as a typical dilatant system. The flow curves of the suspension at various concentrations and temperatures were obtained by using a Couette type rotational viscometer. The flow mechanism of the suspension is explained by a structure model of starch granules in the suspension. Based on the experimental results, a general flow equation for the dilatant system is proposed. By analyzing the temperature dependency of the relaxation time, the activation enthalpy and activation entropy for flow in the starch-water suspension were calculated, the former being about 10 kcal/mol.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.359-362
• /
• 2003

Damping systems have been widely used to various industrial structures and are mainly hydraulic and pneumatic devices nowadays. In this work, a novel damping system based on the colloidal suspension in the field of nanotechnology is investigated. The colloidal suspension consists of Iyophobic working fluid and hydrophobic-coated porous particle. The mechanism of mechanical energy dissipation in damping system based on the colloidal suspension with nano-porous particles is different from that of the existing hydraulic damping system. The absorbed energy of the damping system using colloidal suspension can be calculated through the mechanical equilibrium condition by the superficial tensions of liquid-gas Interface in the hydrophobic surface in nano-porous particles. The results from an analytic approach have a reasonable agreement with experimental results.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.137-143
• /
• 1997

In this study, handling simulation of a passenger car is carried out to see the effects of suspension compliance, roll stabilizef bar and chassis flexibility. The front suspension of the car is a MacPherson strut type and the rear suspension is a multi-link type. The following five DADS models are constructed and compared to verify the effects of suspension compliance and chassis flexibility during lane change. (1) Vdhicle model without hard point compliance and stabilizer, (2) Vehicle model with hard point compoiance, (3) Vehicle model with hard point compliance and stabilizer, (4) Vehicle model with hard point compoiance, stabilizer, and one vibration mode of the chaxxis. (5) Vehicle model with hard point compliance, stabilizer, and three vibration modes of the chassis. The result shows that hard point compliance and stabilizer are significant in roll angle, and the flexibility of the chassis affects the yaw angle and yaw rate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.125-126
• /
• 2008

• Reproductive and Developmental Biology
• /
• 제38권2호
• /
• pp.85-91
• /
• 2014

Despite many researches related with in-vitro culture of porcine spematogonial stem cells (SSCs), adherent culture system widely used has shown a limitation in the maintenance of porcine SSC self-renewal. Therefore, in order to overcome this obstacle, suspension culture, which is known to have numerous advantage over adherent culture, was applied to the culture of porcine SSCs. Porcine SSCs retrieved from neonatal testes were suspension-cultured for 5 days or 20 days, and characteristics of suspension-cultured porcine SSCs including proliferation, alkaline phosphatase (AP) activity, and self-renewal-specific gene expression were investigated and compared with those of adherent-cultured porcine SSCs. As the results, the suspension-cultured porcine SSCs showed entirely non-proliferative and significantly higher rate of AP-positive cells and expression of self-renewal-specific genes than the adherent-cultured porcine SSCs. In addition, long-term culture of porcine SSCs in suspension condition induced significant decrease in the yield of AP staining-positive cells on post-day 10 of culture. These results showed that suspension culture was inappropriate to culture porcine SSCs, because the culture of porcine SSCs in suspension condition didn't stimulate proliferation and maintain AP activity of porcine SSCs, regardless of culture periods.

• The Journal of Korean Physical Therapy
• /
• 제13권3호
• /
• pp.665-675
• /
• 2001

The aim of this study was to compare features of muscle atrophy induced by cast fixation. denervation and suspension of rat hindimb. Muscle mass and glycogen of the soleus and plantaris muscles were studied after 3, 7, or 14 days of cast fixation, denervation and suspension. The results as follows: 1. Body weight of rats decreased significantly after 3 days and showed gradually increase after 7 and 14 days of hindlimb cast fixation, denervation and suspension. Particularly hindlimb suspended rats showed a rapid decrease after 3 days in body weight. 2. Relative weight of soleus and plantaris musclcs decreased significantly by hindlimb cast fixation, denervation and suspension, particularly after 7 days. The decrease rate was the lowest in suspended rats. 3. Glycogen content of soleus muscle decreased significantly after 14 days of hindlimb cast fixation, denervation and suspension. Also glycogen content of plantaris muscle decreased significantly after 14 days of hindlimb cast fixation and denervation, but not significantly after hindlimb suspension. These results indicate that suspension of hindlimb muscles causes less atropy than cast fixation or denervation, likely due to maintainment a few activities during hindlimb suspension. We concluded that the decrease in mechanical strains imposed on the muscle during inactivity was the main factor for the development of atrophy. These basic data suggest that some experimental conditions such as electrostimulation or stretching, participate in countermeasure programmes.

• 한국컴퓨터정보학회논문지
• /
• 제12권2호
• /
• pp.325-331
• /
• 2007

본 논문에서는 능동 현가장치의 해석 및 설계에 강인제어 이론을 적용하여 현가장치설계에 응용 할 수 있는 이론 및 실험적 제어장치 적용에 관한 연구를 수행하였다. 최근의 현가장치설계에서는 강성과 감쇠를 능동적으로 제어하는 기술의 적용이 일반화 되고 있으며, 다른 여러 종류의 차량 안정성제어 장치와의 연계성이 높아짐에 따라, 제어 시스템설계에서 보다 내구성이 강하고 제어효과의 응답성이 빠르며 정도 또한 높은 제어장치의 필요성이 요구되고 있다. 본 연구는 전륜 및 후륜의 위치와 주행속도관계에 따른 능동현가시스템을 해석하여 위와 같은 빠른 응답성과 높은 정도의 제어가 가능한 제어시스템을 해석, 설계하기 위하여 능동 현가 제어시스템의 적용에 관한 고찰을 하였다. 그리고 제어대상시스템에 대한 능동 제어시스템을 설계하기위한 모델링 및 적용방법을 수식적으로 해석하였으며, 능동 현가장치의 제어시스템설계에 중요한 내외란성 향상을 위한 강인제어시스템설계에 적용하는 방법에 관해 고찰하였다.