• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.953-962
• /
• 1987

본 연구에서는 국산 구조용강의 SM 45C 와 SUS 304 재를 최고 강도치가 나타 나는 압접조건하에서 압접하여 우재료의 용착금속부, 열영향부, 각 모재부 소정의 장 소에 미소원공을 가공한 시험편을 토대로 피로크랙의 발생 및 전파거동을 응력 레벨의 고저를 고려하여 고찰하였다.

• 한국안전학회지
• /
• 제7권1호
• /
• pp.65-72
• /
• 1992

Objective of this research is to evaluate fracture behaviors of fresh-butt welded metal by the acoustic emission technique. The specimens used are medium carbon steel(SM45C), mild steel (SS41) and stainless steel(SUS304), which have different weldability. The similar welding and dissimilar welding processes are considered, in the former SM45C, SS41 and SUS304 are used, in the later the following metals are used SM45C and SS41, SM45C and SUS304 and SS41 and SUS304. The characteristics of fracture in weld metal are eshmated by the tension test with nominal speciemns, the fracture toughness test with compact tension specimens and fractography analysis. The results of tension test show for base metals and similar welding materials that the yield strength and ultimate strength of similar welding materials are increased, the elongation of those are decreased. The weldability of SUS304 is better than that of SM45C and SS41 In similar welding materials. Mechanical properties of dissimilar welding mateiiths we lower than those of similar welding materials. In dissimilar welding materials, the weldability of SM45C and SUS304 is better than that of SM45C and SS41, and also weidability of SS41 and SUS304 is better than SS41 and SM45C. Comparing mechanical properties with AE counts, it is found that AE conuts appeared on a small before the limit load of elasticity(P$_{e}$), and apper greatly near yield strength region in tension test. These results could contribute to the safety analyses and the evaluation of strength for welding structure.e.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.85-85
• /
• 2003

• 수산해양기술연구
• /
• 제20권2호
• /
• pp.133-136
• /
• 1984

정변위 인장시험기를 사용하여 SUS 304강 용접열 영향부의 여러 가지 염화 마그네슘용액 중에서의 SCC 발생 특성을 연구한 결과 다음과 같은 결론을 얻었다. 1) SCC 발생 잠복기간은 초기 응력강도계수 K 하(Ii) 값은 낮게 함으로써 크게 지연된다. 2) 비등 염화 마그네슘 용액 중에서의 SCC 발생은 부하와 Cl 이온의 농도에 의한 부동태 피막의 파손에 기인된다. 3) SUS 304 강 용접열 영향부의 SCC 발생 감수성은 높은 농도의 염화 마그네슘 용액일수록 온도를 낮게 함으로써 둔화된다.

• 한국재료학회지
• /
• 제17권3호
• /
• pp.142-146
• /
• 2007

Vacuum brazing method has been coming to an important process as one of the new fabricating techniques of metals and alloys. In this study, a vacuum brazing of SUS304 stainless steel with BNi-2 filler metal was carried out in $1{\times}10^{4}$ Torr of vacuum atmosphere. The formation of brittle intermetallic compounds in brazed joints between SUS304 stainless steel and BNi-2 filler metal is a major concern, since they considerably degrade the mechanical properties of joints. To obtain enough stable joining strength, it is necessary to understand the unique properties of brazing process with Ni-based filler metals containing boron. So, in this research we investigated the performance of SUS304/BNi-2 brazed system and the brazed joint properties were evaluated at room temperature by using tensile test. Metallurgical and fractographic analysis were used to characterize the microstructure, the mechanisms of brazing, and joint failure modes.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.71-79
• /
• 1994

The aim of this study is to analyze the behavier of SUS 304 during the cutting process and the resulting cutting temperaturce. Since SUS 304 is a difficult-to-machine material, tool damage is largely affected by the suitability of cutting conditions. Therefore, in varying such cutting conditions, the experiment investigates the relations between cutting temperature and tool wear during the cutting process. All the cutting temperature data were manipulated successfully, and the tool temperature distributions were analyzed by a finite element method based on the acquisition data. In the results, the characteristics of cutting temperature are related to the difficulty of machining characteristics.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.159-164
• /
• 1996

For the purpose of establishing laser welding condition(laser power, welding speed and beam focus) and of evaluating tailor welded blank for three kinds of thin steel sheets of SPCC, SK5M and SUS304 using in the thin plate structure such as automobile, train and so on. Their $CO_2$ laser weldability were primarily tested under various welding condition. SPCC and SUS304 thin sheets showed good weldability under some welding condition. But, high carbon steel sheet SK5M needs heat treatment after welding to obtain higher tensile strength and ductility of the welded joint. And next, laser welding condition. Butt-welded specimens were not nearly broken at weld bead. However, base material were ruptured in the direction of circumference. The forming depths by tailor weld bead. However, base material were ruptured in the direction of circumference. The forming depths by tailor welded blank were SPCC+SPCC=22~25mm, SUS304+SUS304=25~43mm and SK5M+SK5M=13~17mm.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 추계학술대회 초록집
• /
• pp.165-166
• /
• 2009

이 연구에서는 SUS304 기판과 Cr-Al-Si-N 코팅사이의 밀착특성을 향상시키기 위하여 하이브리드 증착법으로 Cr Interlayer를 기판위에 증착시킨 후 Cr-Al-Si-N 코팅을 증착하였다. 그리고 Ball-on-disk 마모테스트와 스크래치 테스트를 통해 밀착력, 파괴기구, 그리고 마찰거동 등을 살펴보았다. Cr-Al-Si-N 코팅에 60nm 두께의 Cr Interlayer 삽입되었을 때는 기판에 Cr-Al-Si-N 코팅만 증착되었을 때의 밀착력(${\sim}30N$) 보다 더 우수한 ${\sim}50N$의 밀착력을 나타내었고 내마모성 또한 향상되었다. 밀착력 증가는 Cr Interlayer 삽입에 따른 SUS304 기판과 Cr-Al-Si-N 코팅사이의 전단응력 감소에 기인한 것으로 사료된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 춘계학술발표강연 및 논문개요집
• /
• pp.44-44
• /
• 2001

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.267-274
• /
• 2010

Recently, the magnetorheological (MR) polishing process has been examined as a new ultra-precision polishing technology for mirror surface generation in many applications, such as aspheric lenses, biochips, micro parts, etc. This method uses MR fluids which contains micro abrasives as a polishing media, and can. It is possible to obtain nano level surface roughness under suitable process conditions, however, required polishing time is highly dependent on the applied pre-polishing methods due to its very small material removal rate. Thus, in this study, a combined polishing method is presented to reduce total polishing time for SUS304. First, the electropolishing (EP) method was applied to obtain fine surface roughness, and the MR polishing was followed. Surface roughness variations were investigated according to the process conditions. As the results of this study, it was possible to reduce total polishing time for SUS304 using the proposed combined polishing method.