• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.90-103
• /
• 2012

The aim of this study is to be able to understand the problems within the urban agriculture policy promoted by the Government and local autonomous entity base on the comparison of the consciousness of the urban agriculture between urban farmers and public officials and to inquire into the further revitalization scheme in the end. For this purpose, this study drew implications through studying latest trend and the legislation of domestic and foreign urban agriculture and then conducted a questionnaire survey of urban farmers and public officials. Because of this research, the revitalization schemes of urban agriculture are as follows: First, it's necessary to secure the usable arable land, such as the green roof, community garden, as well as urban agriculture park, etc. Second, it is necessary to establish the urban agriculture relations act suited for the actual circumstances of our country and to back up the legislation at an institutional, technological level in terms of a nation in order to secure the durability of urban agriculture. Third, it is advisable to make a proposal about the problems in time of activities for cultivation by forming a network between urban farmers and public officials and to prepare the plan for the active exchange of farming technologies. Fourth, it's necessary to activate the community gardens by supplying the education through cultivation method & its management method, and a variety of urban-agriculture-participation programs. Fifth, it is necessary to set up the specialized and practical education through an institute for landscape architecture. Sixth, it is necessary to induce the spontaneous participation in urban agriculture from urban farmers accompanied by the activities for promotion that are worth arousing urban farmers' interest. Lastly, it is also necessary to establish a legal basis of urban agricultural parks and facilities as well as to promote a search for multilateral policies and their practice so that the further urban agriculture can be stably continued within city boundaries.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.2
• /
• pp.52-61
• /
• 2018

Urban heat islands occur due to increases in the extent of artificial surfaces such as concrete, asphalt and high-rise buildings. In this regard, research into the use of satellite thermal infrared images for thermal environment analysis of urban areas is being carried out. However, such analysis of the characteristics of individual land cover with low-resolution satellite images suffers from limitations because land cover patterns in urban areas are complicated. Recently, UAV has been widely used, which can compensate for this limitation as it is able to acquire high-resolution images. In this paper, the accuracy of UAV infrared images is verified and the applicability of UAV in urban thermal environment analysis is examined by comparing the results with land surface temperatures from Landsat 8 thermal images. The results show a high positive correlation of temperature values at 0.95, and no statistically significant difference between the two groups. Comparisons of land surface temperature according to land cover showed that the largest difference observed was $4.63^{\circ}C$ in the Used area, and UAV images with small cell units reflected various surface temperatures. Furthermore, it was possible to analyze the surface temperatures of various green spaces such as wetlands and street tree areas, which can lower surface temperatures in urban areas, with street tree shadows reducing surface temperatures by about $4-6^{\circ}C$. UAV can easily and rapidly measure the surface temperature of urban areas and is able to analyze various types of green spaces. Thus, this is an effective tool for thermal environment analysis in urban areas to aid in the design or management of urban green spaces, as it can allow for land cover and the effects of the various green spaces.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.469-487
• /
• 2007

Grain-Size Trend Analysis is the methodology to identify net sediment transport pathways, based on the assumption that the movement of sediment from the source to deposit leaves the identifiable spatial pattern of mean, sorting, and skewness of grain size. It can easily be implemented with low cost, so it has great potentials to contribute to geomorphological research, whereas it can also be used inadequately without recognition of its limitations. This research aims to compare three established methods of grain-size trend analysis to search for the adequate way of application, and also suggest the research tasks needed in improving this methodology 1D pathway method can corporate the field experience into analyzing the pathway, provide the useful information of depositional environments through X-distribution, and identify the long-term trend effectively. However, it has disadvantage of the dependence on subjective interpretation, and a relatively coarse temporal scale. Gao-Collins's 2D transport vector method has the objective procedure, has the capability to visualize the transport pattern in 2D format, and to identify the pattern at a finer temporal scale, whereas characteristic distance and semiquantitative filtering are controversial. Le Roux's alternative 2D transport vector method has two improvement of Gao-Collins's in that it expands the empirical rules, considers the gradient of each parameters as well as the order, and has the ability to identify the pattern at a finer temporal scale, while the basic concepts are arbitrary and complicated. The application of grain sire trend analysis requires the selection of adequate method and the design of proper sampling scheme, based on the field knowledge of researcher, the temporal scale of sediment transport pattern targeted, and information needed. Besides, the relationship between the depth of sample and representative temporal scale should be systematically investigated in improving this methodology.

• Asia pacific journal of information systems
• /
• v.24 no.1
• /
• pp.31-50
• /
• 2014

The ubiquitous accessibility of information through mobile devices has led to an increased mobility of workers from their fixed workplaces. Market researchers estimate that by 2016, 350 million workers will be using their smartphones for business purposes, and the use of smartphones will offer new business benefits. Enterprises are now adopting mobile technologies for numerous applications to increase their operational efficiency, improve their responsiveness and competitiveness, and cultivate their innovativeness. For these reasons, various organizational aspects concerning "mobile work" have received a great deal of recent attention. Moreover, many CIOs plan to allocate a considerable amount of their budgets mobile work environments. In particular, with the consumerization of information technology, enterprise mobile applications (EMA) have played a significant role in the explosive growth of mobile computing in the workplace, and even in improving sales for firms in this field. EMA can be defined as mobile technologies and role-based applications, as companies design them for specific roles and functions in organizations. Technically, EMA can be defined as business enterprise systems, including critical business functions that enable users to access enterprise systems via wireless mobile devices, such as smartphones or tablets. Specifically, EMA enables employees to have greater access to real-time information, and provides them with simple features and functionalities that are easy for them to complete specific tasks. While the impact of EMA on organizational workers' productivity has been given considerable attention in various literatures, relatively little research effort has been made to examine how EMA actually lead to users' job performance. In particular, we have a limited understanding of what the key antecedents are of such an EMA usage outcome. In this paper, we focus on employees' perceived job performance as the outcome of EMA use, which indicates the successful role of EMA with regard to employees' tasks. Thus, to develop a deeper understanding of the relationship among EMA, its environment, and employees' perceived job performance, we develop a comprehensive model that considers the perceived-fit between EMA and employees' tasks, satisfaction on EMA, and the organizational environment. With this model, we try to examine EMA to explain how job performance through EMA is revealed from both the task-technology fit for EMA and satisfaction on EMA, while also considering the antecedent factors for these constructs. The objectives of this study are to address the following research questions: (1) How can employees successfully manage EMA in order to enhance their perceived job performance? (2) What internal and/or external factors are important antecedents in increasing EMA users' satisfaction on MES and task-technology fit for EMA? (3) What are the impacts of organizational (e.g. organizational agility), and task-related antecedents (e.g., task mobility) on task-technology fit for EMA? (4) What are the impacts of internal (e.g., self-efficacy) and external antecedents (e.g., system reputation) for the habitual use of EMA? Based on a survey from 254 actual employees who use EMA in their workplace across industries, our results indicate that task-technology fit for EMA and satisfaction on EMA are positively associated with job performance. We also identify task mobility, organizational agility, and system accessibility that are found to be positively associated with task-technology fit for EMA. Further, we find that external factor, such as the reputation of EMA, and internal factor, such as self-efficacy for EMA that are found to be positively associated with the satisfaction of EMA. The present findings enable researchers and practitioners to understand the role of EMA, which facilitates organizational workers' efficient work processes, as well as the importance of task-technology fit for EMA. Our model provides a new set of antecedents and consequence variables for a TAM involving mobile applications. The research model also provides empirical evidence that EMA are important mobile services that positively influence individuals' performance. Our findings suggest that perceived organizational agility and task mobility do have a significant influence on task-technology fit for EMA usage through positive beliefs about EMA, that self-efficacy and system reputation can also influence individuals' satisfaction on EMA, and that these factors are important contingent factors for the impact of system satisfaction and perceived job performance. Our findings can help managers gauge the impact of EMA in terms of its contribution to job performance. Our results provide an explanation as to why many firms have recently adopted EMA for efficient business processes and productivity support. Our findings additionally suggest that the cognitive fit between task and technology can be an important requirement for the productivity support of EMA. Further, our study findings can help managers in formulating their strategies and building organizational culture that can affect employees perceived job performance. Managers, thus, can tailor their dependence on EMA as high or low, depending on their task's characteristics, to maximize the job performance in the workplace. Overall, this study strengthens our knowledge regarding the impact of mobile applications in organizational contexts, technology acceptance and the role of task characteristics. To conclude, we hope that our research inspires future studies exploring digital productivity in the workplace and/or taking the role of EMA into account for employee job performance.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.308-316
• /
• 2015

This study was conducted to investigate the situation of ICT apply to plastic greenhouse, and the results be apply to design of new one. A CFD analysis were conducted to monitering the ventilation and energy saving of the single span greenhouse newly designed. The causes of delay to apply ICT to plastic greenhouse are the high cost for installation(24%), insufficiency of after services(19%), often disorder(16%), unskillful management of soft ware(15%), insufficient ICT efficiency(13%) and unsatisfying of income increase(12%). The parts of problem occurred in ICT plastic greenhouse are the structure, actuator, environmental control system and sensor(approximate 14%, respectively), remote control technique(13%), plant management technique(12%), energy saving technique(10%) and utilization of software(8%). In the condition of lateral window closed, the average wind speed changed to slow, but it was faster in the condition of leeward side window opened than in the condition of lee and winward side window opened. The air movement in the condition of lateral window closed occur by air moving fan not by out air. It is not affect the room temperature but effective the uniformity of room temperature. The average temperature of low height greenhouse was uniform than high height one. The average temperature in condition of 3rd curtain opened become same with outside temperature after 2 hours, but take more 5 hours in condition of 3rd curtain closed.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.88-94
• /
• 2014

This study was carried out to survey the early growth characteristics of Ligularia fischeri, plants of half-shaded grounds, primarily used as functional wild edible greens and examine its shading treatment to transplant seedling. The shading treatment was regulated with the shading level(full sunlight, 35%, 50%, 75%, and 95% of full sunlight). According to the experiment, the height was the highest under 75% of shading (17.3 cm), and root diameter was the highest under full sunlight (2.13 mm). It was found that fresh weight (leaf, shoot, root and whole) was the highest (1.784 g, 1.330 g, 0.791 g, 3.905 g respectively ) under 50% of shading. In case of dry weight, leaf, shoot and whole dry weight were surveyed the highest under 35% of shading, and root dry weight was the highest under full sunlight. It was found that S/R ratio and moisture contents (leaf, shoot, root and whole) were the highest under 95% of shading. Leaf area was the highest under 50% of shading ($39.3cm^2$) and the higher shading level, the higher SLA and LAR. It was surveyed that the higher shading level, the thinner leaf thickness. In case of root characteristics, it was showed that the relatively high height growth under 35%~75% of shading, excepting 95% of shading. As a result of surveying the whole experiment, it is concluded that the early growth of L. fischeri is more effective in producing it under 50% of shading.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.183-193
• /
• 2000

A series of studies such as geological logging data analysis, detailed geological survey, rock mass evaluation, in-situ and laboratory tests, rock strength and mechanical properties of the rock were concerned. The stability of the slope were carried out inorder to design the pit slope and individual benches using the stereographic projection analysis and numerical methods in Roto Pit of Pasir coal fetid. The bedding plane was one of the major discontinuities in the Roto Pit and the dip of which is about $60^{\circ}$in the northern part and $83^{\circ}$in the southern part. The dip of bedding becomes steeper from north to south. The plane and toppling failures are presented in many slopes. In laboratory test the average uniaxial compressive strength of mudstone was 9 MPa and that of weak sandstone was 10 MPa. In-situ test showed that the rocks of Roto north mining area are mostly weak enough to be classified in grade from R2(weak) to R3(medium strong weak) and the coal is classified in grades from R1(Very weak) to R2(Weak). The detailed stability analysis were carried out on 4 areas of Roto north(east, west, south and north), and 2 areas of Roto south(east and west). In this paper, the minimum factor of safety was set to 1.2 which is a general criterion for open pit mines. Using the stereographic projection analysis and the limit equilibrium method, slope angles were calculated as 30~$36^{\circ}$for a factor of safety greater than 1.2. Then these results were re-evaluated by numerical analysis using FLAC. The final slope angles were determined by rational described abode. A final slope of 34 degrees can guarantee the stability for the eastern part of the Roto north area, 33 degrees for the western part, 35 degrees for the northern part and 35 degrees for the southern part. For the Roto south area, 36 degrees was suggested for both sides of the pit. Once the pit slope is designed based on the stability analysis and the safety measures. the stability of 니ope should be checked periodically during the mining operations. Because the slope face will be exposed long time to the rain fall, a study such aspreventive measures against weathering and erosion is highly recommended to be implemented.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.430-440
• /
• 2000

A series of studies such as geological logging data analysis, detailed geological survey, rock mass evaluation, in-situ and laboratory tests, rock strength and mechanical properties of the rock were concerned. The stability of the slope were carried out inorder to design the pit slope and individual benches using the stereographic projection analysis and numerical methods in Roto Pit of Pasir coal field. The bedding plane was one of the major discontinuities in the Roto Pit and the dip of which is about 60$^{\circ}$ in the northern part and 83$^{\circ}$ in the southern part. The dip of bedding becomes steeper from north to south. The plane and toppling failures are presented in many slopes. In laboratory test the average uniaxial compressive strength of mudstone was 9MPa and that of weak sandstone was 10MPa. In-situ test showed that the rocks of Roto north mining area are mostly weak enough to be classified in grade from R2(weak) to R3(medium strong weak) and the coal is classified in grades from R1(Very weak) to R2(Weak). The detailed stability analysis were carried out on 4 areas of Roto north (east, west, south and north), and 2 areas of Roto south(east and west). In this paper, the minimum factor of safety was set to 1.2 which is a general criterion for open pit mines. Using the stereographic projection analysis and the limit equilibrium method, slope angles were calculated as 30∼36$^{\circ}$ for a factor of safety greater than 1.2. Then these results were re-evaluated by numerical analysis using FLAC. The final slope angles were determined by rational described above. A final slope of 34 degrees can guarantee the stability for the eastern part of the Roto north area, 33 degrees for the western part, 35 degrees for the northern part and 35 degrees for the southern part. For the Roto south area, 36 degrees was suggested for both sides of the pit. Once the pit slope is designed based on the stability analysis and the safety measures, the stability of slope should be checked periodically during the mining operations. Because the slope face will be exposed long time to the rain fall, a study such aspreventive measures against weathering and erosion is highly recommended to be implemented.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.4 s.38
• /
• pp.157-173
• /
• 2005

The purpose of this study is to clarify the effects of Home Economics instruction using motivation(ARCS) strategy on the learning motivation and academic attitude toward the subject. To accomplish the purpose, teaching-learning plan using motivation(ARCS) strategy was developed and the subjects for this study were 155 End grade male students randomly chosen from four classes at a middle school in Incheon Metropolitan City. In the 5th period instruction about 'utilization of resources and environment' unit, 76 students of two classes as an experimental group received the Home Economics instruction using motivation(ARCS) strategy, while 79 students of two classes as a comparative group took lecture type instruction. The results of this study were as the follows 1. Home Economics instruction using motivation(ARCS) strategy was more effective than the lecture type instruction to improve learning motivation and positive change in academic attitude toward Home Economics subject. 2. Home Economics instruction using motivation(ARCS) strategy was effective to improving learning motivation regardless of their levels of students prior learning motivation and learning achievement. 3. Home Economics instruction using motivation(ARCS) strategy was effective to positive change in academic attitude toward Home Economics subject regardless of their levels of students Prior learning achievement and at the aspect of prior motivation to learn, the high level students were more effective than the low level students. 4. According to responses of students and teacher for Home Economics instruction using motivation(ARCS) strategy, it was effective to improving active participation and interest for Home Economics instruction.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.192-217
• /
• 2008

This paper investigated the perceived criticalities and patterns of Korean Professional Engineer's competency regarding the working activities of automative product development, manufacturing, etc by using questionnaires responded to the survey which were applied to the automotive professors, experts and professional engineers (vocational parties) by e/mail, etc. This research investigated the following questions: First, what are the characteristic patterns, relevancy and perceived criticalities of Korean Professional Engineer's competencies? Second, What are the ranked priority of the Korean Professional Engineers' competencies? Are there any differency for each item, sub group of job, intelectual criterior of the competencies between relevancy and perceived criticalities according to the types of vocational parties, etc.? Accoring to the results; first, Professor group showed highest points among 3 groups per each item of the competencies by vocational parties Second, Chassis design group ranked top position among the 8 sub groups by vocational parties and, third, Problem Solving Knowledge ranked highest points than any others. Korean Professional Engineers are found to be positioned as key members, leaders and managers on surveying market, product planning, designing product & components, developing component parts, establishing shop with production equipment, managing quality control & material handling, organizing relevant meetings, developing human resources by training and learning, to back up finance with law matters, cooperating with concerned parties to achieve organizational goals, and to coordinate projects. etc, identifying ethical issues and business skills in order to survive and win to be competitive in various kinds of the automotive industry battle fields.