• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.135-141
• /
• 2019

Internet of thing becomes more active, many sensor devices are increasing. Sensors can use network wired network or use mobile communication network. From the viewpoint of the transmission rate, the mobile communication network can be roughly divided into two types of high-speed communication and low-speed communication. In the case of hundreds of millions of sensors in the mobile communication network, resources are wasted to use high-speed communication. Communication is required to reduce the transmission rate and appropriately allocate resources without wasting such resources. As the Internet of Thing has been activated, Narrowband Internet of Thing(NB-IoT), which is one of the low-power technologies in recent mobile communications, is in the spotlight from various companies. Currently, it can be seen that only NB-IoT or other low power consumption communication has the potential to be able to connect to the Internet with rapidly increasing sensor devices. In this paper, we designed and implemented a heater controller using Huawei NB-IoT communication Module, a server that collects controller information, and an application that allows default settings for devices. The main function of this system is to collect temperature and heater status and give it to the server, control the heater from the server, and set parameters for the heater to operate automatically. The system can be applied to places where wired communication is not established, such as road information, smart agriculture, and small reservoirs as well as heaters.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.34 no.2
• /
• pp.233-249
• /
• 2023

This study aimed to understand the application and types of Creative Commons Licenses (CCL) in Korean journals and to increase understanding of the state of open access in South Korea. The study collected and analyzed CCL-related information from the websites of 2,097 KCI journals and compared the findings with DOAJ journals and previous research. The results of the study are summarized as follows. Firstly, 18% (377 journals) of the KCI journals adopted CCL, and among them, approximately 90% (337 journals) were in the field of STEM. There were few academic journals applying CCL in humanities and social sciences fields. Secondly, the types of CCL adopted by KCI journals were NC licenses (90%), with CC BY-NC (85%) being the most common. This is a significant difference from DOAJ journals, where 52% of academic journals applied CC BY or CC BY-SA. However, fewer journals applied licenses of the ND licenses than DOAJ journals and Spanish journals. Thirdly, 44% (167) of the 377 academic journals that applied CCL were simultaneously for free in public databases and sold for a fee in commercial databases. 33% (125) were publicly available for free in public databases, and 9% (33) were sold in commercial databases.

• Reproductive and Developmental Biology
• /
• v.28 no.3
• /
• pp.167-172
• /
• 2004

This study was performed to examine the correlations among dog sperm viabilities evaluated by flow cytometry, by microscopic evaluation (ME), by carbo-xifluorescein diacetate and propidium iodide (CFDA/PI) and by hypoosmotic swelling (HOS) test. Semen were collected from 5 dogs ranging in age from 2 to 4 years. Each ejaculate was divided into 3 aliquots and different proportions of freeze-killed cells were added to each aliquot (1:0, 1:1 and 1:3). In the other experiment, semen was extended with Sweden extender containing 5% glycerol and equex STM paste, and frozen using liquid nitrogen vapor. Fresh and frozen-thawed dog sperm viability were assessed by flow cytometry using PI staining method. The accuracy of flow cytometry was evaluated by comparing with other classic assessments, microscopic evaluation, epifluorescence microscopic analysis using CFDA/PI, and HOS test. High correlations of sperm viabilities were found among flow cytometry, epifluorescence evaluation, HOS test (p<0.01) in fresh semen. Especially, sperm viability assessed by HOS test was highly correlated with viability by flow cytometry in all the ratios of live and dead spermatozoa, 1:0, 1:1 and 1:3 (p<0.01). The viability evaluated by ME were significantly correlated with that by flow cytometry in ratios of 1:0 and 1:3 (p<0.05) however, there was no significance in ratio of 1:1. The viability evaluated by C/p were highly correlated with that by flow cytometry in ratio of 1:0 and 1:1 (p<0.01) and significantly correlated in ratio of 1:3 (p<0.05). In frozen-thawed spermatozoa, the viability determined by HOS test was considerably correlated with that by flow cytometry (p<0.01). There was significant correlation between the viabilities by ME and by flow cytometry (p<0.05). But the viability evaluated by CFDA/PI was not correlated with viability by flow cytometry. The result from this study validate the use of flow cytometry as a precise method for assessing the viability of fresh and frozen-thawed dog spermatozoa.

• Journal of Embryo Transfer
• /
• v.18 no.2
• /
• pp.91-96
• /
• 2003

The aim of this study was conducted to evaluate the effect of sugar kinds and combination of various sugars on acrosome damage of post-thaw spermatozoa in canine. The extender used in this study was Tris-citric acid extender (Tris-buffer) supplemented with 20% Egg-yolk, 8% glycerol, 1% Equex STM paste, and 70 mM sugars such as monosaccharide (fructose and xylose) and disaccharide(trehalose). To evaluate of sugar combination, the sugars supplemented in Tris-buffer were combined such as control (fructose, xylose, trehalose), two combinations (Fru+Tre, Fru+Xyl, Tre+Xyl) and three combinations (Fru+Tre+Xyl). The acrosome damage rate of post-thaw spermatozoa in Eosin B & Fast Green stain in Fruc+Tre was higher than those in fructose, trehalose, xylose, Fruc+Xyl, Tre+Xyl, Fruc+Tre+Xyl (83.0$\pm$5.6 vs. 82.3$\pm$3.1%, 81.7$\pm$2.1%, 72.0$\pm$2.0%; 80.3$\pm$4.5%, 76.7$\pm$3.8%, 81.0$\pm$5.6). The motility after CASA analysis in Fru+Tre was higher than those in Fru+Tre+Xyl, Tre+Xyl, Fru+Xyl, Xylose, Trehalose, Fructose(79$\pm$6 vs 75$\pm$3, 74$\pm$8, 71$\pm$11, 70$\pm$4, 66$\pm$15, 63$\pm$ 12%). However, the progressive motility after CASA analysis in Fru+Tre group was higher than those in Fru+Tre+Xyl, Tre+Xyl, Fru+Xyl, Xylose, Trehalose, Fructose (67$\pm$7, 64$\pm$3, 62$\pm$6, 61$\pm$8, 60$\pm$2, 57$\pm$13, 53$\pm$10%). The results indicated that the acrosome damage & progressive motility of post-thaw spermatozoa in 70 mM Fruc+Tre (two combination) following Eosin B & Fast Green stain and CASA analysis.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.947-953
• /
• 2005

Previous test results showed that the current ASTM(American Standard for Testing and Materials) grip adapter for GFRP(Glass Fiber Reinforced Polymer) rebar was not fully successful in developing the design tensile strength of GFRP rebars with reasonable accuracy. It is because the current ASTM grip adapter which is composed of a pair of rectangular metal blocks of which inner faces are grooved along the longitudinal direction does not take into account the various geometric characteristics of GFRP rebar such as surface treatment, shape of bar cross section as well as physical characteristics such as poisson effect, elastic modulus in the transverse direction and so on. The objective of this paper is to provide how to proportion the optimum diameter of inner groove in ASTM grip adapter to develop design tensile strength of GFRP rebar. The proportioning of inner groove in ASTM grip adapter is based on the force equilibrium of GFRP rebar between tensile capacity and minimum frictional resistance required along the grip adapter. The frictional resistance of grip adapter is calculated based on the compressive strain compatibility in radial direction induced by the difference between diameter of GFRP rebar and inner groove In ASTM grip. All testing procedures were made according to the CSA S806-02 recommendations. From the preliminary test results on round-type GFRP rebars, it was found that maximum tensile loads acquired under the same testing conditions is highly affected by the diameter of inner groove in ASTM grip adapter. The grip adapter with specific dimension proportioned by proposed method recorded the highest tensile strength among them.