• STI Policy Review
• /
• v.7 no.1
• /
• pp.87-109
• /
• 2016

Public procurement for innovation (PPI) is a new approach in stimulating innovation, and currently attracts considerable attention from policymakers and academics. This paper discusses the rationales and perspectives of PPI in Vietnam. The rationales for public procurement for innovation policy in Vietnam compared to theoretical and international practice are discussed. From such a comparison, the paper concludes that R&D results-procurement policy in Vietnam shall be understood and implemented as regular PPI both theoretically and practically. However while designing the policy, policymakers must consider the characteristics of the STI system of the country in order to make the policy adaptable to context. The paper identifies that PPI in Vietnam can be implemented with a ready legal framework (intellectual property rights, R&D contracts, standardization, etc.), the prepared capabilities of R&D institutions, businesses, and public agencies in innovation processes, and the provision of a demand-supply network and other procurement incentives.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.5
• /
• pp.262-267
• /
• 2002

In this paper, we first studied the factors affecting the motor current (MC) signal, which was strongly affected by the systematic hardware noises depending on polishing such as pad conditioning and arm oscillation of platen and recipe, head motor. Next, we studied the end point detection (EPD) for the chemical mechanical polishing (CMP) process of shallow trench isolation (STI) with reverse moat structure. The MC signal showed a high amplitude peak in the fore part caused by the reverse meal. pattern. We also found that the EP could not be detected properly and reproducibly due to the pad conditioning effect, especially when conventional low selectivity slurry was used. Even when there was no pad conditioning effect, the EPD method could not be applied, since the measured end points were always the same due to the characteristics of the reverse moat structure with an open nitride layer.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.135-137
• /
• 2009

Mathematical models for describing the Human Immunodeficiency Virus(HIV) infection can be devised to better understand how the HIV causes Acquired Immune Deficiency Syndrome(AIDS). The HIV models can then be used to find clues to curing AIDS from a control theoretical point of view. Some models take Cytotoxic T Lymphocytes(CTL) response to HIV infection into account, and others consider mutants against the drugs. However, to the best of our knowledge, there has been no model developed, which describes CTL response and mutant HIV together. Hence we propose a unified model to consider both of these. On the basis of the resulting model, we also present a Model Predictive Control(MPC) scheme to find an optimal treatment strategy. The optimization is performed under the assumption that the Structured Treatment Interruption(STI) policy is employed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.369-374
• /
• 2003

Disassembly scheduling is the problem or determining the ordering and disassembly schedules or used or end-of-life products while satisfying the demand or their parts or components over a certain planning horizon. To represent and optimally solve the basic case. i e ., single product type without parts commonality, an Integer programming model is suggested for the objective or minimizing the sum or purchase, setup, inventory holding, and disassembly operation costs. Then, the basic model is offended to consider the cases or single and multiple product types with parts commonality. Computational experiments done on the examples obtained from the literature show that the integer programming approach suggested in this paper works well.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.189-192
• /
• 2001

Recently, STI process is getting attention as a necessary technology for making high density of semiconductor by devices isolation method. However, it does have various problems caused by CMP nprocess, such as torn oxide defects, nitride residues on oxide, damages of si active region, contaminations due to post-CMP cleaning, difficulty of accurate end point detection in CMP process, etc. In this work, the various defects induced by CMP process was introduced and the above mentioned problems of CMP process was examined in detail. Finally, the guideline of future CMP process was presented to reduce the effects of these defects.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.9
• /
• pp.888-894
• /
• 2007

The speech sound is detected by the vibration measurement of the window glass. In this study, we investigate the effect of the disturbing waves by background noise and window shaker excitation on the speech intelligibility of the detected sound. Based upon Modulation Transfer Function(MTF), speech intelligibility of the sound is objectively estimated by Speech Transmission Index(STI) As the level of the disturbing wave varies, variation of the speech intelligibility is examined. Experimental result reveals how STI is influenced by the level and frequency characteristics of the disturbing wave. By using a customized window shaker for disturbing sound, we evaluate the efficiency and the frequency characteristics of the anti-eavesdropping system. The purpose of the study is to provide useful information to prevent the eavesdropping through the window glass.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.686-692
• /
• 2002

Disassembly scheduling is the problem of determining the ordering and disassembly schedules of used products while satisfying the demand of their parts of components over a certain planning horizon. The objective is to minimize the sum of purchase, setup, disassembly operation and inventory holding costs. This paper considers products with assembly structure, i.e. products without parts commonality, and suggests a heuristic in which an initial solution is obtained in the form of the minimal latest disassembly schedule, and then improved considering trade-offs among different cost factors. To show the performance of the heuristic suggested in this paper, computational experiments were done on the modified existing examples and the results show that the heuristic can give optimal of very near optimal solutions within very short computation times.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.786-790
• /
• 2003

The purpose of this research is to observe that the acoustic characters of classroom have some difference by several conditions. TSP has used to measure impulse response and such physical indexes as RT(Reverberation Time), D$\sub$50/, and STI(Speech-Transmission-Index) are computed by it. we investigate difference under some conditions such as when students were present at each classroom and when was not so, and when professor used a microphone and unused it. In this study, we found that reverberation time when people take a seat is lower than was not so. we wish to help one who work for construction industry, as they build a kind of classroom

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04a
• /
• pp.631-634
• /
• 2002

In this paper we improved that hump occurrence by increased oxidation thickness, and control field oxide recess$(\leq20nm)$, wet oxidation etch time(19HF, 30sec), STI nitride wet cleaning time(99 HF, 60sec + P 90min) and gate pre-oxidation cleaning time(U10min+19HF, 60sec) to prevent hump occurring at STI channel edge.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.6
• /
• pp.189-192
• /
• 2009

The leakage current in a CMOS image sensor (CIS) can have various origins. Leakage current investigations have focused on such things as cobalt-salicide, source and drain scheme, and shallow trench isolation (STI) profile. However, there have been few papers examining the effects on leakage current of nitride stringers that are formed by gate sidewall etching. So this study reports the results of a series of experiments on the effects of a nitride stringer on real display images. Different step heights were fabricated during a STI chemical mechanical polishing process to form different nitride stringer sizes, arsenic and boron were implanted in each fabricated photodiode, and the doping density profiles were analyzed. Electrons that moved onto the silicon surface caused the dark leakage current, which in turn brought up the speckle defect on the display image in the CIS.