• 제목/요약/키워드: STATIC-99

검색결과 172건 처리시간 0.03초

초고온 동압을 받는 제트 베인의 구조 안전성 평가에 대한 연구 (A study on structural safety evaluation of jet vane under very high temperature and dynamic pressure)

  • 박성한;이상연;박종규;김원훈;문순일
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2005년도 제24회 춘계학술대회논문집
    • /
    • pp.99-105
    • /
    • 2005
  • 초고온($2700^{\circ}C$) 연소가스에 직접 노출된 상태에서 가스유동에 의한 동압을 받는 추력편향장치용 제트 베인의 열구조 안전성을 평가하기 위하여 내열합금의 초고온 인장시험 및 3차원 비선형 수치해석을 수행하였다. 고온 구조거동을 분석하여 제트 베인의 구조안전성을 평가하였으며 구조해석결과를 지상연소시험결과와 비교하였다. 구조 및 열 하중의 대부분은 제트 베인 축에 집중되었으며, 축은 $1400^{\circ}C$ 이하에서 구조적으로 안전한 것으로 밝혀졌다. 지상연소시험결과와 구조해석결과의 비교를 통하여 베인 하중과 축의 변위를 기준으로 구조안전계수를 평가하는 것이 등가응력에 의한 평가 기준보다 더 유용한 기준으로 판단되었다.

  • PDF

가압-진공 하이브리드 주입 성형에 의한 알루미나의 성형에 미치는 다단 가압의 영향 (Effect of Step Pressure on Shape Forming of Alumina by Pressure-Vacuum Hybrid Slip Casting)

  • 조경식;이현권;우병준
    • 한국세라믹학회지
    • /
    • 제50권2호
    • /
    • pp.142-148
    • /
    • 2013
  • Conventional cold isostatic pressing, slip casting, and filter pressing are not completely suitable for fabricating large plates because of disadvantages such as the high cost of equipment and formation of density gradient. These problems could be avoided by employing pressure-vacuum hybrid slip casting (PVHSC). In the PVHSC, the consolidation occurs not only by the compression of the slip in casting room, but also by vacuum sucking of the dispersion medium around the mold. We prepared the alumina bodies by the PVHSC in a static- or stepwise-pressure manner for loading up to 0.5 MPa using an aqueous slip. The green bodies were dried at $30^{\circ}C$ with 40 ~ 80% relative humidity. Under static pressure, casting induced a density gradient in the formed body, resulting in cracking and distortion after the firing. However, the stepwise pressure loading resulted in green bodies with homogeneous density, and the minimization of the appearance of those defects in final products. Desirable drying results were obtained from the cast bodies dried with 80% RH environment humidity. When sintered at $1650^{\circ}C$ for 4 h, the alumina plate made by stepwise-pressure casting reached full density (> 99.7% relative density).

PHYSICAL PROPERTIES OF FRESH RED PEPPER

  • W. J. La;D. B. Song;Lee, S. K.;Lee, T. K.
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
    • /
    • pp.578-585
    • /
    • 2000
  • Geometrical characteristics of fresh red pepper(Capsicum annuum L.) were measured and indexed to define some important geometrical characteristics, and malformation of body and fruit stalk which are necessary for the design of the equipments for cutting, spreading and alignment of red pepper in developing a fruit stalk remover of fresh red pepper. The effects of bending of body and fruit stalk on the equipments of cutting, spreading and alignment were studied. The maximum lengths of some parts of fresh red pepper were found to be 180 mm, 125 mm, 144 mm, 67 mm and 76 mm for the body, the bent part of body, the fruit stalk, the bent part and the straight part of fruit stalk, respectively. The fresh red pepper with bending indices more than 0.4 and 0.3 for the body and the fruit stalk, respectively, was defined to be malformed based on the result of cutting rate using cutting unit; while the other ones to be normal in shape. Based on this, among the total fresh red peppers tested, 47%, 40% and 20% were found malformed for the body, the fruit stalk, and for both of the body and the fruit stalk. Malformed red peppers were poorer in spreading and alignment than normal ones, and the processed quantity was decreased with increased feed rate. The required time for the malformed peppers to pass on the alignment plate inclined at 30 increased rapidly at 8.3 Hz with increased feed rate. For the fresh red peppers with average moisture content of 85%,w.b., the maximum tensile strength between fruit stalk and body was 88.1 N; the maximum cutting resistances were 92.1 N and 94.9 N for the fruit stalk-calyx joint and body, respectively. Average coefficients of static friction were 0.99, 0.62, 0.59 and OJ, respectively, for the surfaces of rubber, galvanized iron, acryl and plywood.

  • PDF

Structural health rating (SHR)-oriented 3D multi-scale finite element modeling and analysis of Stonecutters Bridge

  • Li, X.F.;Ni, Y.Q.;Wong, K.Y.;Chan, K.W.Y.
    • Smart Structures and Systems
    • /
    • 제15권1호
    • /
    • pp.99-117
    • /
    • 2015
  • The Stonecutters Bridge (SCB) in Hong Kong is the third-longest cable-stayed bridge in the world with a main span stretching 1,018 m between two 298 m high single-leg tapering composite towers. A Wind and Structural Health Monitoring System (WASHMS) is being implemented on SCB by the Highways Department of The Hong Kong SAR Government, and the SCB-WASHMS is composed of more than 1,300 sensors in 15 types. In order to establish a linkage between structural health monitoring and maintenance management, a Structural Health Rating System (SHRS) with relevant rating tools and indices is devised. On the basis of a 3D space frame finite element model (FEM) of SCB and model updating, this paper presents the development of an SHR-oriented 3D multi-scale FEM for the purpose of load-resistance analysis and damage evaluation in structural element level, including modeling, refinement and validation of the multi-scale FEM. The refined 3D structural segments at deck and towers are established in critical segment positions corresponding to maximum cable forces. The components in the critical segment region are modeled as a full 3D FEM and fitted into the 3D space frame FEM. The boundary conditions between beam and shell elements are performed conforming to equivalent stiffness, effective mass and compatibility of deformation. The 3D multi-scale FEM is verified by the in-situ measured dynamic characteristics and static response. A good agreement between the FEM and measurement results indicates that the 3D multi-scale FEM is precise and efficient for WASHMS and SHRS of SCB. In addition, stress distribution and concentration of the critical segments in the 3D multi-scale FEM under temperature loads, static wind loads and equivalent seismic loads are investigated. Stress concentration elements under equivalent seismic loads exist in the anchor zone in steel/concrete beam and the anchor plate edge in steel anchor box of the towers.

효모 종류 및 발효 방식에 따른 현미식초의 유기산과 휘발성분 특성 (Properties of Organic Acids and Volatile Components in Brown Rice Vinegar Prepared Using Different Yeasts and Fermentation Methods)

  • 윤성란;김귀란;이지현;이수원;여수환;정용진;권중호
    • 한국식품저장유통학회지
    • /
    • 제17권5호
    • /
    • pp.733-740
    • /
    • 2010
  • 식초제조시 효모균주(Saccharomyces kluyveri DJ97, Saccharomyces cerevisiae JK99, Saccharomyces cerevisiae GRJ, Saccharomyces cerevisiae H9)와 속성 및 정치발효에 따른 현미식초의 유기산 및 휘발성 성분을 비교하였다. 현미식초의 유기산 함량은 acetic acid 이외에 속성발효에서는 citric acid, lactic acid, oxalic acid, tartaric acid 순으로 나타났다. 그러나 정치발효에서는 citric acid가 검출되지 않았으며, lactic acid 함량이 속성발효 식초보다 다소 높은 것으로 나타났다. Saccharomyces cerevisiae GRJ 균주 알코올 발효액의 속성발효 식초는 acetic acid가 다른 식초에 비해 높게 나타났으나, 전반적으로 유기산 함량은 효모균주보다는 발효방식에 따라 차이가 있는 것으로 나타났다. GC-MS로 휘발성 성분을 동정한 결과, 현미식초의 주된 휘발성 성분인 acetic acid 이외에 속성발효에서는 alcohol류로 phenylethyl alcohol, isoamyl alcohol의 비율이 높은 것으로 나타났으며, ester류는 ethyl acetate, isoamyl acetate, isobutyl acetate 비율이 높은 것으로 나타났다. 그 이외에 benzaldehye, iso butyric acid, pentanoic acid, heptanoic acid, caprylic acid 등이 검출되었다. 정치발효에서는 alcohol류는 1-butanol, phenylethyl alcohol, isomyl acohol 비율이 높게 나타났으며, ester류는 phenylethyl acetate 및 ethyl acetate가 높은 것으로 나타났다. 또한 전자코 분석에서 속성발효 및 정치발효에 있어서 향기 패턴의 차이가 있는 것으로 나타났다. 그러나 관능적 특성으로 효모 균주에 따른 유의적인 차이는 크지 않은 것으로 나타났다. 반면에 이취(발효취) 강도는 속성발효에서 다소 높은 것으로 나타났으나, acetic acid의 자극취로 인해 검사원에 의한 뚜렷한 차이는 볼 수 없었다.

좌측 유방의 세기변조 방사선치료 시 Virtual Bolus 적용에 따른 선량 변화 비교 평가 (Dosimetric Comparison of Left-sided Whole Breast Irradiation using a Virtual Bolus with VMAT and static IMRT)

  • 임경진;김태완;장요종;양진호;이승현;염두석;김선영
    • 대한방사선치료학회지
    • /
    • 제31권2호
    • /
    • pp.51-63
    • /
    • 2019
  • 목 적: 유방암 방사선치료 시 호흡이나 부종으로 인한 유방 변화를 고려하여 치료계획을 하여야 한다. 본 연구는 부분절제술을 시행한 좌측 유방암 환자의 세기조절 방사선치료 시 치료 용적의 변화에 따른 Virtual Bolus(VB) 기법의 유용성을 평가하고자 하였다. 대상 및 방법: 본원에서 유방보존술 후 방사선치료를 받은 환자 10명을 대상으로 하였고 VMAT 과 IMRT에서 VB를 적용한 치료계획과 적용하지 않은 치료계획을 각각 수립하여 유방의 변화에 따른 선량을 비교하였다. 유방에 변화가 없을 경우 VMAT_NoVB와 VMAT_VB에서 치료 용적의 V95%, HI, CI와 Ipsilateral Lung의 Dmean, V5, V20, V30, Heart의 Dmean을 비교 분석하였고 IMRT도 동일한 방법으로 진행하였다. 또한 치료 용적에 1cm 변화가 있을 경우 각 치료계획의 TCP, NTCP를 분석하였다. 결 과: 유방에 변화가 없을 경우 처방선량의 95%를 받는 PTV_NoVB 체적의 비율은 VMAT_NoVB와 VMAT_VB에서는 99.80±0.17%, 99.75±0.12%였고, IMRT_NoVB와 IMRT_VB에서는 99.67±0.26%, 99.51±0.15%였다. 각 환자에 따른 수치를 비교해 보면, VMAT_VB의 PTV_NoVB에 대한 V95%는 VMAT_NoVB의 PTV_NoVB에 대한 V95% 보다 0.08±0.22배 낮았다. 또한 IMRT_VB에서 PTV_NoVB에 대한 V95%는 IMRT_NoVB 보다 0.24±0.36배 낮았지만 큰 차이를 보이지 않았다. HI와 CI는 3% 이내의 차이를 보였다. OAR에서는 대부분 VB Plan에서 선량이 높게 나타났지만 가이드라인을 초과하지 않았다. 유방에 1cm의 변화가 있을 경우 NoVB Plan의 TCP는 유방에 변화가 없을 때보다 90% 이상 감소하는 것으로 나타났지만, VB Plan은 비슷한 수준의 치료 효과를 유지하는 것으로 나타났다. 결 론: Virtual Bolus를 적용한 치료계획은 기존의 치료계획과 비슷한 Plan Quality를 가지면서 움직임으로 발생하는 선량 오차를 줄여줄 수 있는 방법이다. 유방암의 세기조절 방사선치료 시 유방의 움직임이나 부종이 예상된다면 VB를 적용한 치료계획이 매우 유용할 것이라 사료된다.

간암에서 색전술의 효과를 평가하는데 있어서 $^{99m}Tc$-MAA SPECT를 이용한 간동맥 혈류 검사의 의의 (Evaluation of Embolization Effect of Hepatocellular Carcinoma by Hepatic Arterial Flow Study with $^{99m}Tc$-MAA SPECT)

  • 이병희;유형식;이종두;정진일;박창윤;이종태
    • 대한핵의학회지
    • /
    • 제28권1호
    • /
    • pp.62-68
    • /
    • 1994
  • 본 저자들은 $^{99m}Tc$-MAA를 이용하여 정상 간조직에 대한 간암의 상대적인 미세 혈류량을 조사하고 간암 환자에서 간동맥 색전술을 시행 후 상대적인 혈류량의 변화를 검사함으로써 간동맥 색전술의 효과를 알아보고자 하였다. 여덟명의 간암 환자들을 대상으로 하였는데, 이 중 다섯 명은 조직 생검으로, 그리고 나머지 세 명은 임상적, 그리고 방사선학적으로 진단되었다. 3내지 4mCi의 $^{99m}Tc$-MAA를 2cc의 생리식염수에 혼합하여 간동맥내에 위치된 카테터(catheter)를 통하여 1분간에 걸쳐 서서히 주입한 후 바로 동적영상을 4초 간격으로 1분 동안 얻었으며, 이어서 정적 영상과 SPECT를 시행하였다. 간동맥 혈관 조영술만을 시행한 세명의 환자에서 $^{99m}Tc$-MAA를 주입하자마자 주변 간 조직에서 비해 간암내에 강한 방사능 섭취를 보였으며, 주변 간조직에 대한 간암의 방사능 섭취율은 6.5 이상이었고, 그 범위는 6.5에서 19였으며 평균은 12.5였다. 간동맥 색전술을 시행한 5명 중 4명에서 주변 간조직에 대한 간암의 방사능 섭취율이 심하게 감소하였다($0.5{\sim}1.3$). 또한 색전된 부위는 색전술 후 시행한 추적 간동맥 혈관 촬영상에서 보다 동위원소 검사에서 잘 관찰되었다. 간동맥혈관 촬영상에서 완전히 색전된 것으로 생각된 한 환자에서 동위원소 검사상 간암에 강한 방사능 섭취를 보였다(주변 간조직에 대한 간암의 방사능 섭취율 7.0). 따라서 본 저자들은 $^{99m}Tc$-MAA를 이용한 간 동맥 혈류 검사는 간암에서 색전술의 효과를 정확히 평가할 수 있는 유용한 검사법으로 이용될 수 있으리라 생각한다.

  • PDF

$^{99m}Tc$-DMSA 신장검사에서 획득 계수의 차이에 따른 기능 및 형태 평가 (The Quantitative Assessment of Renal Function and Size by Differences of Acquisition Counts in $^{99m}Tc$-DMSA Renal Scan)

  • 심동오;김호성;정은미
    • 핵의학기술
    • /
    • 제14권2호
    • /
    • pp.117-121
    • /
    • 2010
  • 핵의학 검사에서 정적 영상을 획득하는 방법은 총 계수 설정법(preset count method)과 시간 설정법(preset time method)이 있다. $^{99m}Tc$-DMSA를 이용한 정적 신장 검사는 총 계수 설정법을 주로 사용하고 있지만 시간 설정법을 사용하는 곳도 있다. 총 계수 설정법을 사용하는 경우는 매번 동일한 계수를 획득하게 되지만 검사 시간은 차이가 있고, 시간 설정법의 경우는 검사 시간은 일정하지만 동일하지 못한 계수가 획득되게 된다. 따라서, 본 연구에서는 획득되는 계수에 따른 좌우 신장의 기능 및 형태 정보에 어떠한 차이가 있는 지 알아보고자 하였다. 2010년1월11일부터 3월31일까지 서울아산병원 핵의학과에서 $^{99m}Tc$-DMSA 신장 검사를 시행한 환자 중 한쪽 신장의 상대적 기능이 40~60%인 30명(남:여=11:19)의 환자를 대상으로 하였으며, 신장 내에 냉소나 열소가 존재하여 신장 피질의 구분이 명확하지 않은 경우는 제외하였다. 대상자의 나이는 $14.83{\pm}22.07$세로서 성인과 소아를 따로 구분하지 않았으며, 검사 시 이용한 장비는 PHILIPS사의 BrigthView 감마카메라를 사용하였다. 신장의 기능 및 형태 분석을 위해서는 동일 회사의 JET stream release 3.0 version을 이용하였고, 통계 분석은 SPSS 12.0을 사용하여 기술통계, 대응 표본 t 검정 (paired t-test)을 시행하였다. 영상은 다른 검사인자들을 모두 동일하게 설정하고 획득 계수를 10만 계수와 30만 계수, 그리고 획득 시간을 7분 (30만 계수 초과)으로 변경하여 연속적으로 획득하였고, 신장의 기능 및 형태 정보를 평가하기 위해서 좌우 신장의 상대적 기능(renal relative function)과 기하평균(geometric mean) 그리고 신장의 크기(Size)를 측정하였으며 그에 따른 각각의 차이를 비교 분석하였다. 좌우 신장의 상대적 기능(좌측 신장 기준)의 경우 10만 계수는 $50.52{\pm}3.61%$, 30만 계수는 $50.38{\pm}3.66%$, 7분 획득은 $50.31{\pm}3.64%$였으며 각 방법 간에 통계적으로 유의한 차이는 없었다. 기하 평균(좌측 신장 기준)의 경우 10만 계수는 $50.08{\pm}3.25%$, 30만 계수는 $49.89{\pm}3.40%$, 7분 획득은 $49.91{\pm}3.24%$였으며 이 역시 통계적으로 유의한 차이는 없었다. 신장의 크기 중 좌측의 경우 10만 계수는 $8.23{\pm}1.96$ cm, 30만 계수는 $8.35{\pm}1.97$ cm, 7분 획득은 $8.45{\pm}2.01$ cm이었고, 각 방법 간에는 통계적으로 유의한 차이를 나타내었다(p<0.05). 우측 신장의 경우 10만 계수는 $7.91{\pm}1.88$ cm, 30만 계수는 $8.12{\pm}1.90$ cm, 7분 획득은 $8.25{\pm}1.96$ cm이었으며, 각 방법 간에는 통계적으로 유의한 차이를 나타내었다(p<0.05). 본 연구 결과에 의하면 획득 계수에 따른 좌우 신장의 상대적 기능과 기하 평균은 통계적으로 유의한 차이가 없었지만, 신장의 형태는 획득 계수가 증가할수록 크기가 증가하는 경향을 보였으며 통계적으로도 유의한 차이를 나타내었다. 따라서, 정적 신장 검사의 신뢰성 있는 정량 평가를 위해서는 시간 설정법보다 총 계수 설정법을 사용하는 것이 바람직할 것이다. 특히, 추적검사의 경우는 시간 설정법을 사용하면 검사 시마다 획득되는 계수가 다르게 되어 신장의 형태 평가에 차이를 발생시킬 것이다.

  • PDF

Accuracy and Reliability of The Spine-Pelvis Monitor to Record Three-Dimensional Characteristics of The Spine-Pelvic Motion

  • Kim, Jung-Yong;Yoon, Kyung-Chae;Min, Seung-Nam;Yoon, Sang-Young
    • 대한인간공학회지
    • /
    • 제31권2호
    • /
    • pp.345-352
    • /
    • 2012
  • Objective: The aim of this study is to evaluate the accuracy and reliability of Spine-Pelvis Monitor(SPM) that was developed to measure 3-dimensional motion of spine and pelvis using tilt sensor and gyro sensor. Background: The main cause of low back pain is very much associated with the task using the low back and pelvis, but no measurement technique can quantify the both spine and pelvis. Method: For testing the SPM, 125 angles from three anatomical planes were measured three times in order to evaluate the accuracy and reliability. The accuracy of SPM in measuring dynamic motion was evaluated using digital motion analysis system. The motion pattern captured by two measuring methods was compared with each other. In result, the percentage error and Cronbach coefficient alpha were calculated to evaluate the accuracy and reliability. Results: The percentage error was 0.35% in flexion-extension on sagittal plane, 0.43% in lateral bending on coronal plane, and 0.40% in twisting on transverse plane. The Cronbach coefficient alpha was 1.00, 0.99 and 0.99 in sagittal, coronal and transvers plane, respectively. Conclusion: The SPM showed less than 1% error for static measurement, and showed reasonably similar pattern with the digital motion system. Application: The results of this study showed that the SPM can be the measuring method of spine pelvis motion that enhances the kinematic analysis of low back dynamics.

Clinical Efficacy of a Top-down Approach for Children with a First Febrile Urinary Tract Infection

  • Jang, Kyung Mi;Lim, Myung Hee;Park, Yong Hoon;Kim, Saeyoon
    • Childhood Kidney Diseases
    • /
    • 제21권2호
    • /
    • pp.114-120
    • /
    • 2017
  • Purpose: The aim of this study was to determine the clinical characteristics, frequency of renal abnormalities and benefits of a top-down approach in children with their first febrile urinary tract infection (UTI). Methods: We reviewed 308 patients retrospectively who were admitted to Yeungnam University Hospital and were treated for their first febrile UTI from February 2006 to December 2013. We performed a comparative analysis of laboratory findings and results of imaging techniques including a Tc-99m dimercaptosuccinic acid (DMSA) renal scan. Results: Among the patients, 69% (213/308) were males, and 90% (277/308) had their first UTI episode during infancy. A DMSA renal scan was performed on all patients, and showed positive findings in 60% (184/308) of cases. Laboratory indices of inflammation were significantly higher in the DMSA-positive group (P< 0.05). There was a statistically significant difference in the age distribution between the two groups. In the DMSA-positive group, 165 patients underwent voiding cystourethrography (VCUG), and 58 (35%) cases demonstrated vesicoureteral reflux. In total, 110 patients in the DMSA-positive group, underwent repeat scanning at 6 months; 33 children (30%) demonstrated static scarring, but 77 (70%) had improved completely. The concordance of the ultrasonography (US) and VCUG was low. Older patients had more renal scarring. Conclusion: DMSA is a sensitive method for assessing the severity of inflammation and kidney injury. However, the ability of US to predict renal parenchymal damage was limited. A top-down approach in children with their first febrile UTI showed significant value.