• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.83-83
• /
• 2010

We report a new direct printing method, called liquid-mediated nanotransfer molding (LB-nTM), that uses a polar liquid-mediated transfer process. LB-nTM is based on the direct transfer of various materials from a stamp to a substrate via a liquid- bridge between the stamp and the substrate. This procedure can be adopted in automated printing machines that generate various material patterns with a wide range of feature sizes (as small as 60 nm) on diverse substrates. To demonstrate its usefulness, the LB-nTM method was applied to prepare ZnO-nanowire and TIPS-pentacene transistors.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.85-85
• /
• 2010

We report a new direct printing method, called liquid-mediated nanotransfer molding (LB-nTM), that uses a polar liquid-mediated transfer process. LB-nTM is based on the direct transfer of various materials from a stamp to a substrate via a liquid- bridge between the stamp and the substrate. This procedure can be adopted in automated printing machines that generate various material patterns with a wide range of feature sizes (as small as 60 nm) on diverse substrates. The patterns have been investigated by scanning electron microscopy(SEM).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.339-340
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.93-94
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.39-39
• /
• 2003

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.42-42
• /
• 2003

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.72.2-72.2
• /
• 2007

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1337-1339
• /
• 1999

This paper presents transmission pricing mechanisms based on postage stamp rule. Two pricing mechanisms with three different calculation methods are suggested, followed by case studies in KEPCO system.

• 한국멀티미디어학회논문지
• /
• 제15권8호
• /
• pp.1048-1058
• /
• 2012

본 논문은 클라우딩 환경에서 클라이언트와 저장 서버, 검증 서버로 구성하여 자가 조직 저장 매체의 데이터 손실을 방지하고, 보안을 유지하기 위한 DDMPF( Distributed Data Management Protocol using FAT)을 제안한다. DDMPF는 클라우드 컴퓨팅 환경에서 자가 조직 저장 서버를 구축하고, 데이터를 분할하여 저장 서버에 분산 저장함으로써 기존의 클라우딩 저장 매체의 중앙 집중화 문제와 저장 서버 문제로 인한 데이터 손실 문제를 해결하였고, 파일할당테이블을 이용해 분산 저장된 데이터 관리의 효율성도 향상시켰다. 그리고 DDMPF는 저장 서버의 데이터 무결성을 검증 서버가 검증함으로써 데이터의 신뢰성을 향상시키고, 클라이언트의 비밀키와 EC-DH 알고리즘을 이용하여 생성된 시스템 마스터 키로 이중 암호화하여 전송함으로써 보안을 강화시켰다. 또한, 자가 조직 저장 매체를 구성할 때, 검증서버의 개수를 제한하고, 검증요청메시지에 대한 TS(Time Stamp)을 설정함으로써 플러딩 공격 탐지하였고, 검증을 요청할 때마다 새롭게 생성된 nonce 값을 이용하여 재전송 공격을 탐지하도록 하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.489.2-489.2
• /
• 2014

The planar type flexible piezoelectric energy harvesters (PEH) based on PbZr0.52Ti0.48O3 (PZT) thin films on the flexible substrates are demonstrated to convert mechanical energy to electrical energy. The planar type energy harvesters have been realized, which have an electrode pair on the PZT thin films. The PZT thin films were deposited on double side polished sapphire substrates using conventional RF-magnetron sputtering. The PZT thin films on the sapphire substrates were transferred by PDMS stamp with laser lift-off (LLO) process. KrF excimer laser (wavelength: 248nm) were used for the LLO process. The PDMS stamp was attached to the top of the PZT thin films and the excimer laser induced onto back side of the sapphire substrate to detach the thin films. The detached thin films on the PDMS stamp transferred to adhesive layer coated on the flexible polyimide substrate. Structural properties of the PZT thin films were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). To measure piezoelectric power generation characteristics, Au/Cr inter digital electrode (IDE) was formed on the PZT thin films using the e-beam evaporation. The ferroelectric and piezoelectric properties were measured by a ferroelectric test system (Precision Premier-II) and piezoelectric force microscopy (PFM), respectively. The output signals of the flexible PEHs were evaluated by electrometer (6517A, Keithley). In the result, the transferred PZT thin films showed the ferroelectric and piezoelectric characteristics without electrical degradation and the fabricated flexible PEHs generated an AC-type output power electrical energy during periodically bending and releasing motion. We expect that the flexible PEHs based on laser transferred PZT thin film is able to be applied on self-powered electronic devices in wireless sensor networks technologies. Also, it has a lot of potential for high performance flexible piezoelectric energy harvester.