• Title/Summary/Keyword: ST-N

Search Result 1,523, Processing Time 0.03 seconds

Experimental Studies on the Cold Storage of the Rabbit Heart for Transplantation (이식을 위한 심장의 장시간 보존에 관한 실험)

  • No, Jung-Gi;Lee, Cheol-Se;Lee, Gil-No
    • Journal of Chest Surgery
    • /
    • v.22 no.6
    • /
    • pp.887-893
    • /
    • 1989
  • Donor availability is a major limiting factor in heart transplantation. Prolonging donor heart preservation would facilitate distant heart procurement. The setup used was the isolated retrograde perfused nonworking rabbit heart model and 4 hours of preservation at 2oC. And the electron microscopic findings of the myocardium were evaluated after reperfusion for 5 minutes. The following three groups [each group, n=4] were prepared: Group I: the heart was arrested with the St. Thomas Hospital solution [STH] and stored in Ringers lactate solution [RLS]; Group II: the heart was arrested with STH and stored in Modified Collins-Sachs solution [MCS]; Group g: the heart was arrested with and stored in MCS. The result was the most severe myocardial injury in the Group III on electron microscopic study.

  • PDF

Theoretical Calculation of Parabolic Rate Constant for High-Temperature Oxidation of Metals (금속의 고온 산화동안 포물선 속도상수의 이론적 계산)

  • Kim, Insoo;Cho, Weol Dong
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.14 no.5
    • /
    • pp.282-285
    • /
    • 2001
  • Based on the mass balance of anion and cation fluxes, the parabolic rate constant ($K_p$) of oxide grown during the high-temperature oxidation of metal is theoretically calculated. It is assumed that the diffusion of oxygen anion and metal cation through oxide scale obeys the Fick's 1st law, the growth of oxide is controlled by the diffusion of ions, electrical potential gradient as driving force for diffusion of ions is ignored, and oxidation occurs within an existing oxide layer. Then, the parabolic rate constant can be expressed by $K_p=[2{\rho}_{MmOn}{M^2}_{MmOn}(mD_oC_o{^e}+nD_MC_M{^e})/nm]$.

  • PDF

Growth Characteristics and Change of Inorganic Element in the Leaf of Perilla by Replanting (잎들깨의 연작에 따른 생장특성과 엽내 무기원소의 함량변화)

  • 하상영;박선일
    • Journal of Life Science
    • /
    • v.9 no.5
    • /
    • pp.620-627
    • /
    • 1999
  • This study was conducted to elucidate the growth characteristics and change of inorganic element in the leaf of perilla by replanting. The replanting injury in the height of perilla appeared from the 2nd and 3rd year after replanting, and the sickness of soil occurred from the 4th year. Number of node of perilla by replanting was significantly affected to the middle stage of growth, but was similar at the latter stage of growth. Weight of a leaf was the highest at the 1st and 2nd year, and decreased with the replanting. Also, the rate of dry leaf decreased with the replanting. In the content of inorganic element of the perilla leaf by replanting, N in the leaf increased with the replanting, and K and S decreased. However the content of Ca, Cu and Mn did not affected to replanting.

  • PDF

Simulations on Incompressible MHD Turbulence

  • CHO JUNGYEON
    • Journal of The Korean Astronomical Society
    • /
    • v.34 no.4
    • /
    • pp.275-279
    • /
    • 2001
  • The study of incompressible magnetohydrodynamic (MHD) turbulence gives useful insights on many astrophysical problems. We describe a pseudo-spectral MHD code suitable for the study of incompressible turbulence. We review our recent' works on direct three-dimensional numerical simulations for MHD turbulence in a periodic box. In those works, we use a pseudo-spectral code to solve the incompressible MHD equations. We first discuss the structure and properties of turbulence as functions of scale. The results are consistent with the scaling law recently proposed by Goldreich & Sridhar. The scaling law is based on the concept of scale-dependent isotropy: smaller eddies are more elongated than larger ones along magnetic field lines. This scaling law substantially changes our views on MHD turbulence. For example, as noted by Lazarian & Vishniac, the scaling law can provide a fast reconnection rate. We further discuss how the study of incompressible MHD turbulence can help us to understand physical processes in interstellar medium (ISM) by considering imbalanced cascade and viscous damped turbulence.

  • PDF

Longitudinal Study on Effects of Dfntal Arch Growth in the Case of Using a Space-Maintaier After Primary Tooth Extraction (유치조기발거후 보극장치물이 치궁발육에 미치는 영향)

  • Shon, Dong-Su
    • The Journal of the Korean dental association
    • /
    • v.11 no.4
    • /
    • pp.277-280
    • /
    • 1973
  • The author observed the changes of dental arch dimensions and compared spae-maintainer group with non-space-maintainer group after primary tooth extraction. The results were as follows 1) The rate of growth of dental arch of expeirmental group in intercanine width and in inter-1st molar width was more rapid than that of the control group. 2) Arch length is almost no dimensions but it was slightly decreased in lower arch. 3) Dental arch growth and tooth eruption were stimulated by space-maintainer appliance, so it is the best way to replace a new appliance at least once a year. 4) It is thought that satisfactory conclusions in this observation must be researched successively until the mixed dentition completes.

  • PDF

A Design of Digital Filter IC Using a Semi-Custom Design Method (Semi-custom 방식을 이용한 디지털 필터의 집적회로 설계)

  • 이광엽;김봉렬;이문기
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.25 no.2
    • /
    • pp.227-232
    • /
    • 1988
  • A semicustom VLSI design fo digital filters used in TDM/FDM transmultiplexer is described. A filter bank composed of only all-pass digital filter sections are implemented with the polyphase network. The use of all-pass filters as basic building blocks is shown to provide a trans-multiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler system is used to reduce the design time and to increase the credibility of designed filters. As a prototype, 1st and 2nd order all pass filter are designed, using CMOS N-well double metal technology. The chip sizes of first order filter and the second order filter are 2652 x 533\ulcorner\ulcorner 5334x4300\ulcorner\ulcorner respectively.

  • PDF

First Record of a Leptocephalus Nettenchelys gephyra (Nettastomatidae) in Korean Waters (포항 주변해역에서 채집된 한국미기록종 Neuttenchelys gephyra 댓잎뱀장어)

  • Kim, Sung;Soh, Ho-Young;Kim, Choong-Gon
    • Ocean and Polar Research
    • /
    • v.27 no.4
    • /
    • pp.491-495
    • /
    • 2005
  • The morphology of a leptocephalus Nettenchelys gephyra (Hettastornatidae) is described from one specimen collected of Pohang $(35^{\circ}46'N,\;129^{\circ}52'E)$ in the East Sea, Korea on December 2003. The body is laterally compressed. The body deepens gradually behind the head to the deepest point of the midbody range that is 15.8% of the standard length 31.7mm, then tapers gradually toward the tail. The anus is located somewhat posteriorly to midbody. There are two intestinal swellings, which are located at the 19th and 41st myomere, respectively. The vertical blood vessel's last location is at the 48th myomere. The lateral pigment spot begins at the 84th myomere.

Isolation of Polypeptide Fractions from Different Park offered Ginseng

  • Larina, Ludmila;Muranova, T.;Cho, B.G.;Park, H.
    • Proceedings of the Ginseng society Conference
    • /
    • 1998.06a
    • /
    • pp.160-167
    • /
    • 1998
  • Chemical studies of nitrogen compounds of Panax ginseng seem relatively rare, Probably due to the isolation difficulties, subsequently the investigations of biological activities are little. The experimental conditions were established for highly complete extraction of peptides (basic, acidic and neutral) from Panax ginseng. This task was achieved by applying the follow isolation procedure: 1 , the sequential extraction with water, 0.1% TFA in 20% acetonitril and buffer pH 6.5 (water-pyridine-acetic acid 100:3:900) : 2, fractionation by ultrafiltration : 3, n-butanol extraction 4, cation- and anion-exchange chromatography : 5, chromato-electrophoresis. The comparison of red ginseng (xylem Sl pith part) and red ginseng inside white (xylem Sc pith part) was also provided. To analyze the peptide mixture the chromato-electrophoresis method of separation was applied. Optimal conditions for peptides mapping of sample were explored. Our experiments revealed the quantitative difference of peptide between xylem & pith and phloem & cortex part. We have also found the qualitative difference in the composition of polypeptides between normal red ginseng (xylem Sc pith part) and red ginseng inside-white (xylem St pith part)

  • PDF

The Chemical Resistance of Polymer Cement Slurry Coated Reinforcing Bars (폴리머 시멘트 슬러리 도장철근의 내약품성)

  • 김현기;장성주;김완기;소양섭
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2000.10b
    • /
    • pp.1121-1126
    • /
    • 2000
  • The purpose of this study is to clarify chemical resistance of polymer-cement slurry coated reinforcing bars. Polymer cement slurry coated reinforcing bars were showed the good state to the bending resistance, impact resistance, adhesive strength, but exact data of the chemical resistance do not exist. Through the experimental, it is to certify chemical resistance of polymer cement slurry coated reinforcing bars. In this study, polymer cement slurry coated reinforcing bars are prepared with two types of polymer, polymer-cement ratios of 50%, 100%, 150%, coating thickness, curing periods of 3, 7, 28days, and tested for chemical resistance as KS(Korea Standard). From the test results, chemical resistance of polymer cement slurry coated reinforcing bars used by acrylic and St/BA emulsion were showed excellent without concerned polymer-cement ratios, curing period except for 1% aqueous solution $H_2SO_4$. But polymer cement coated reinforcing bar used by acrylic emulsion is inferior to aqueous solution NaOH.

An Auto-tuning of PID Controller using Fuzzy Performance Measure and Neural Network for Equipment System (전력설비시스템을 위한 퍼지 평가함수와 신경회로망을 사용한 PID제어기의 자동동조)

  • ;李壽欽
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.13 no.2
    • /
    • pp.195-195
    • /
    • 1999
  • This paper is Proposed a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control in various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is Pade-approximated, then initial values are determined by the Ziegler-Nickels method. So we can find the parameters of PID controller so as to minimize the fuzzy criterion function which includes the maximum overshoot, damping ratio, rising time and settling time. Finally, after studying the parameters of PID controller by Backpropagation of Neural-Network, when we give new K, L, T values to Neural-Network, the optimized parameter of PID controller is found by Neural-Network Program.