• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 추계 학술대회논문집
• /
• pp.15-24
• /
• 2000

The transient response of an airfoil to a rapidly deploying spoiler is numerically investigated using the turbulent compressible Navier-Stokes equations in two dimensions. Algebraic Baldwin-Lomax model, Wilcox $\kappa-\omega$ model, and SST $\kappa-\omega$ turbulence model are used to calculate the unsteady separated flow due to the rapid spoiler deployment. The spoiler motion relative to a stationary airfoil is treated by an overset grid hounded by a Dynamic Domain-Dividing Line which has been devised by the authors. The adverse effects of the spoiler influenced by the spoiler location and the hinge gap are expounded. The numerical results are in reasonably good agreement with the existing experimental data.

• 한국항공우주학회지
• /
• 제42권11호
• /
• pp.903-910
• /
• 2014

선풍기는 유도 전동기에 의해 구동되는 축류형 날개를 가진 기계이다. 본 연구에서는 기본 설계된 선풍기의 날개를 바탕으로 스태킹 라인의 최적 설계를 통해 선풍기의 성능 향상을 목표로 하였다. 전산 해석을 위해 상용 툴인 Ansys 사(社)의 CFX 14.5를 이용하였고, 난류 모델은 k-${\omega}$ SST 를 사용하였다. 설계 변수는 스윕 각과 기울기 각으로 설정하였고, 유량과 토크를 목적함수로 설정하여 스태킹 라인의 최적화를 수행하였다. 최적화 결과 풍량이 증가하였고, 토크가 감소함을 확인 하였다. 최적화된 모델과 기본 모델은 KS C 9301을 이용하여 측정되었으며, 전산 해석 결과를 검증하였다.

• 한국추진공학회지
• /
• 제20권6호
• /
• pp.18-28
• /
• 2016

듀얼 벨 노즐을 평가하기 위한 기초연구로써 전산수치해석을 진행하였다. 추후 진행할 설계 변수 연구를 위해 듀얼 벨 노즐을 설계하고 입구 조건과 난류 모델, 최적 격자수를 선정하였다. 듀얼 벨 노즐은 KSLV-II 1단 노즐을 기반으로 설계하였다. 입구 조건은 설계 값과의 비교를 통해 비반응 8화학종의 동결유동 모델로 결정하였다. 난류 모델은 SST $k-{\omega}$ 모델이 가장 적합하였다. 격자 민감도 해석을 통해 약 15만개의 최적 격자수를 선정하였다. 본 연구에서 결정한 내용들을 바탕으로 향후 한국형발사체에 듀얼 벨 노즐을 적용한 해석을 진행하여 성능 이득을 연구하고자 한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.590-593
• /
• 2009

모델 스크램제트 엔진의 3차원 유동특성 이해를 위하여 다단의 충격파를 발생 시키는 흡입구부터(외부 유동영역) 공동형 보염기, 연소기, 노즐이 포함되는 엔빈 내부 전영역을 통합한 수치해석을 수행하였다. $k-{\omega}$ SST 난류모델과 Sarkar모델이 적용된 저 레이놀즈 수 k-e 난류모델의 해석결과를 실험 결과와 비교하였으며, 흡입구의 측면효과(intake side wall effects)를 살펴보기 위하여 측면의 유무에 따른 유동특성을 관찰하였다. 본 연구에 소요되는 계산시간의 효율성을 위하여 계산영역을 다중블럭으로 구성하였으며, MPI(Massage Passing Interface) 병렬 계산 기법을 적용하였다.

• Journal of Advanced Research in Ocean Engineering
• /
• 제4권2호
• /
• pp.86-95
• /
• 2018

The fluid flow over structures has been widely investigated by many researchers because its extensive application in offshore structures, skyscrapers, chimneys and cooling towers, brides. In the viewpoint of reducing the drag for offshore structure, it becomes challenging problem in the field of hydrodynamic of offshore structure. The purpose of this study is to investigate a flow over a square cylinder with an attached splitter plate using RANS method. First, RANS turbulent models such as a standard $k-{\omega}$ model, SST $k-{\omega}$ model, RNG $k-{\varepsilon}$ model, realizable $k-{\varepsilon}$ model, standard $k-{\varepsilon}$ model were used for choosing suitable turbulent model which has the best agreement with available experimental result. Drag of single cylinder estimated by using standard $k-{\omega}$ has a good agreement with published experimental result. Therefore, the stand $k-{\omega}$ was selected for simulation for flow over a square cylinder with an attached plate. Second, the numerical results of drag of square cylinder with an attached splitter plate in various length of an attached plate were performed using RANS method in ANSYS Fluent. In this paper, the numerical simulations were conducted at a Reynolds number of 485 and the thickness of the splitter plate is chosen as a constant value about 10% of cylinder width. The numerical results of drag coefficient of square cylinder are compared with experimental result published by other researchers. Finally, the effect of the splitter plate attached to the rear side of the square cylinder has been investigated numerically with a focus on the drag coefficient and flow characteristic. As a result, the drag coefficient decreases with an increase in splitter plate length.

• 한국전산유체공학회지
• /
• 제20권1호
• /
• pp.47-56
• /
• 2015

In this paper, we study the effect of various turbulence models by comparing the aerodynamic characteristics and the flow patterns computed for aircraft models. An in-house CFD solver, MSAPv, that solves the three dimensional RANS equations with the turbulence model equations is used. The turbulence models used in this study are the Spalart-Allmaras model, Menter's $k-{\omega}$ SST model, Coakley's $q-{\omega}$ model, and Huang and Coakley's $k-{\varepsilon}$ model. DLR-F6 WB and WBNP configurations are selected for the study. We concentrate on the separated flow pattern variations with the turbulence models at the wing-body junction and the wing-pylon junction as well as drag polar curves.

• 한국전산유체공학회지
• /
• 제17권3호
• /
• pp.11-17
• /
• 2012

In this study, aerodynamic analyses have been conducted for 4-Bladed Vertical-Axis Wind Turbine (VAWT) configuration and the results are compared with experimental data. Reynolds-averaged Navier-Stokes equation with LES turbulence model is solved for unsteady flow problems. In addition, the computation results by standard k-${\omega}$ and SST k-${\omega}$ turbulence models are also presented and compared. An experiment model of 4-Bladed VAWT model has been designed and constructed herein. Experimental tests for aerodynamic performance of the present VAWT model are practically conducted using the vehicle mounted testing system. Comparison results between the experiment and the computational fluid dynamics (CFD) analyses are presented in order to show the accuracy of CFD analyses using the different turbulent models.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.98-98
• /
• 2022

도수는 사류가 상류로 천이되며 흐름이 불연속적으로 변하는 현상이다. 도수는 롤러와 벽 제트와 같은 흐름이 발생하는 영역으로 구분되며 큰 에너지 손실을 발생시키므로, 보나 댐과 같은 수리시설물에서는 에너지 소산을 위한 목적으로 도수를 발생시킬 수 있다. 도수구간 중 롤러 영역에서는 공기가 유입되어 복잡한 3차원 2상 흐름을 발생시키므로 공기방울의 거동에 대한 정밀한 모의는 매우 중요한 것으로 평가된다. 그러나 현실적으로 롤러 영역에서의 작은 공기방울까지 재현하는 것은 어려운 일이다. 본 연구에서는 k-ω SST 난류모형을 이용하여 수문 아래에서 발생하는 자유도수를 수치모의하고 연행된 공기량에 대한 특성을 검토하였다. 롤러 영역에서 격자의 해상도를 다르게 하여 도수구간 내 공기의 체적비와 공기방울의 크기 및 공기방울의 거동을 분석하였다. 실내 실험자료에 난류모형을 적용하고 그 결과와 비교하여 모의 결과의 적정성을 확인하였다. 또한 도수구간에서 공기방울 거동의 정밀한 모의가 평균흐름 및 난류량의 종방향 변화에 미치는 영향을 검토하였다.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.70-80
• /
• 2016

The comparison of two commercial codes(FLUENT and STAR-CCM+) and an open-source code(OpenFOAM) are carried out for the aerodynamic analysis of flight vehicles at low speeds. Tailless blended-wing-body UCAV, main wing and propeller of HALE UAV(EAV-3) are chosen as geometries for the investigation. Using the same mesh, incompressible flow simulations are carried out and the results from three different codes are compared. In the linear region, the maximum difference of lift and drag coefficients of UCAV are found to be less than 2% and 5 counts, respectively and shows good agreement with wind tunnel test data. In a stall region, however, the reliability of RANS simulation is found to become poor and the uncertainty according to code also increases. The effect of turbulence models and meshes generated from different tools are also examined. The transition model yields better results in terms of drag which are much closer to the test data. The pitching moment is confirmed to be sensitive to the existence and the location of transition. For the case of EAV-3 wing, the difference of results with ${\kappa}-{\omega}$ SST model is increased when Reynolds number becomes low. The results for the propeller show good agreement within 1% difference of thrust. The reliability and uncertainty of three codes is found to be reasonable for the purpose of engineering use. However, the physical validity and reliability of results seem to be carefully examined when ${\kappa}-{\omega}$ SST model is used for aerodynamic simulation at low speeds or low Reynolds number conditions.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.83-86
• /
• 2007

Turbulent flow analysis is conducted around the multi-stage launch vehicle including base region and detachment motion of strap-on boosters due to resultant aerodynamic forces and gravity is simulated. Aerodynamic solution procedure is coupled with rigid body dynamics for the prediction of separation behavior. An overset mesh technique is adopted to achieve maximum efficiency in simulating relative motion of bodies and various turbulence models are implemented on the flow solver to predict the aerodynamic forces accurately. At first, some preliminary studies are conducted to show the importance of base flow for the exact prediction of detachment motion and to find the most suitable turbulence model for the simulation of launch vehicle configurations. And then, developed solver is applied to the simulation of KSR-III, a three-stage sounding rocket researched in Korea. From the analyses, after-body flow field strongly affects the separation motions of strap-on boosters. Negative pitching moment at initial stage is gradually recovered and a strap-on finally results in a safe separation, while fore-body analysis shows collision phenomena between core rocket and booster. And a slight variation of motion is observed from the comparison between inviscid and turbulent analyses. Change of separation trajectory based on viscous effects is just a few percent and therefore, inviscid analysis is sufficient for the simulation of separation motion if the study is focused only on the movement of strap-ons.