• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.985-987
• /
• 2003

This paper presents a design and characteristics analysis of a SRM drive for EPS application. A rack mounted EPS system is considered in this paper. A conventional driving room space and mechanical structure are suggested in design stage. In the restricted design conditions, motor parameters are determined for sufficient torque and speed. For the smooth torque generation and simple circuit of power system, 12/8 motor drive is considered. With FEM and magnetic circuit analysis, designed motor is simulated to meet the requirement of specifications. Effectiveness of the suggested SRM drive for EPS application is verified by the manufactured prototype motor drive tests.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.18-20
• /
• 2003

In this paper, design and performance analysis of switched reluctance motor(SRM) according to design parameters are foaled. The parameters which are sensitive to the performance are examined and selected to have a good performances. Prototype machines are constructed to compare with the simulated results.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.36-38
• /
• 2003

This paper shows a characteristics analysis of Switched Reluctance Motor(SRM) for design optimization. The static and dynamic characteristics are analysised by simulation case of 6/4 and 12/8pole machine. The torque, efficiency and acoustic noise are tested to compare drive performances.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.58-61
• /
• 2004

In this paper, design and performance analysis of switched reluctance motor(SRM) according to design parameters are researched. The parameters which are sensitive to the performance are examined and selected to have good performances. Some effective guide lines to have a good performance motor are suggested. Prototype machines are constructed to compare with the simulated and tested results.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.3
• /
• pp.187-193
• /
• 2016

PURPOSE. This pilot study was to find the influence of complete denture on the brain activity and cognitive function of edentulous patients measured through Electroencephalogram (EEG) signals. MATERIALS AND METHODS. The study recruited 20 patients aged from 50 to 60 years requiring complete dentures with inclusion and exclusion criteria. The brain function and cognitive function were analyzed with a mental state questionnaire and a 15-minute analysis of power spectral density of EEG alpha waves. The analysis included edentulous phase and post denture insertion adaptive phase, each done before and after chewing. The results obtained were statistically evaluated. RESULTS. Power Spectral Density (PSD) values increased from edentulous phase to post denture insertion adaption phase. The data were grouped as edentulous phase before chewing (EEG p1-0.0064), edentulous phase after chewing (EEG p2-0.0073), post denture insertion adaptive phase before chewing (EEG p3-0.0077), and post denture insertion adaptive phase after chewing (EEG p4-0.0096). The acquired values were statistically analyzed using paired t-test, which showed statistically significant results (P<.05). CONCLUSION. This pilot study showed functional improvement in brain function of edentulous patients with complete dentures rehabilitation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.40-46
• /
• 2012

The single-phase switched reluctance motor(SRM) has only one inductance variation and the positive torque is generated in the restricted section. So, it cannot be started by itself. To solve this problem, many researchers have addressed the several starting method for the single-phase SRM. This paper is focused on the torque characteristics of the single-phase SRM according to starting method. The four major starting method - permanent magnet, saturable stator pole, to grade the rotor, stepped rotor pole - is selected to analyze the torque characteristics. The analysis model of each starting method is designed to changed the pole shape or inserting other material in the basic model. The torque characteristics of each analysis model is obtained by using FEM analysis. The FEM analysis is performed at incremental rotor positions over half inductance cycle in any one pole with 250AT, 500AT, 750AT. The distortion factor of each analysis model is analyzed through the FFT to compare the distortion between basic model and four analysis model.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.15-16
• /
• 2010

본 논문에서는 최소의 진동/소음을 가지는 SRM을 설계하기 위하여 고정자와 회전자의 Skew에 따른 단상 6/6 SRM의 소음/진동 특성을 비교, 분석하였다. SRM(Switched Reluctance Motor)에 발생하는 소음/진동의 주 원인은 모터 구동 시 Yoke 에 발생하는 방사방향 힘의 변화라고 할 수 있다. Yoke에 작용하는 힘은 돌극이 위치한 곳에 집중되므로 더욱 큰 진동을 유발하지만 회전자와 고정자에 동일한 Skew를 적용시키면 힘을 받는 Yoke의 면적은 늘어나게 되고, 따라서 방사방향의 힘을 요크 전체로 분산 시킬 수 있다. 이에 따라 스위치 온, 오프시 요크에 인가되는 방사방향의 힘의 최대치는 감소하게 되어 진동/소음이 현저히 줄어들게 된다. 본 논문에서는 최소의 진동/소음을 가지는 SRM을 설계하기 위하여 시뮬레이션을 통하여 회전자와 고정자의 스큐 각도에 따른 힘의 분포를 분석하였다. 시뮬레이션 결과를 바탕으로 하여 대표적인 특성을 가진 $0^{\circ}$, $18^{\circ}$의 SRM을 설계하여 소음/진동을 측정한 결과 제안한 방식이 소음/진동을 현저하게 감소시키는 효과를 가짐을 입증하였다.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.189-197
• /
• 2017

This paper elaborates two novel proposed topologies (type-I and type-II) of the high step-up DC-DC converter using switched inductor and voltage multiplier cell. The advantages of these proposed topologies are the less voltage stress on semiconductor devices, low device count, high power conversion efficiency, high switch utilization factor and high diode utilization factor. We analyze the Type-II topologies operating principle and mathematical analysis in detail in continuous conduction mode. High-intensity discharge lamp for the automotive application can use the derived topologies. The proposed converters give better performance when compared to the existing types. Also, it is found that the proposed type-II converter has relatively higher voltage gain compared to the type-I converter. A 40 W, 12 V input voltage and 72 V output voltage has developed for the type-II converter and the performances are validated.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.13-15
• /
• 2003

This paper presents a design and characteristics analysis of a SRM drive for EPS application. A rack mounted EFS system is considered in this paper. A conventional driving room space and mechanical structure are suggested in design stage. In the restricted design conditions, motor parameters are determined for sufficient torque and speed. For the smooth torque generation and simple circuit of power system, 12/8 motor drive is considered. With FEM and magnetic circuit analysis designed motor is simulated to meet the requirement of specifications. Effectiveness of the suggested SRM drive for EPS application is verified by the manufactured prototype motor drive tests.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.46-49
• /
• 2004

Switched Reluctance Motor(SRM) has been researched for its superior characteristics. The SRM drive system has simple mechanical and magnetic structure, and it requires simple power electronic drive circuit. It is to be compatible to wide range adjustable speed drive system because it has the same driving characteristics of DC series motor's, easy control principle and high efficiency characteristics. In this paper, 2 types of excitation strategy are researched. Conventional 1-phase excitation and 2-phase excitation method are compared and tested. Though 1-phase excitation method is robust and has high performance, 2-phase excitation method has some merit in appling power device. Some simulation and test results are foaled with some analysis.