• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.34-37
• /
• 2001

In this study, the capacitance-voltage properties of $(Sr_{1-x}\cdot Ca_x)TiO_3(0.05{\leq}x{\leq}0.20)$-based grain boundary layer ceramics were investigated. The ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were $1480\sim1500^{\circ}C$ and 4 hours. respectively. The 2nd phase formed by the thermal diffusion of CuO from the surface leads to very excellent dielectric properties, that is, ${\varepsilon}_r$ >50000, tan$\delta$ <0.05, ${\Delta}C$ < ${\pm}10%.$ The capacitance is almost unchanged below about 20[V] but it decreases slowly about 20[V]. The results of the capacitance-voltage properties indicated that the grain boundary was composed of the continuous insulating layers.

• Environmental Engineering Research
• /
• 제20권2호
• /
• pp.163-169
• /
• 2015

In this study, we attempted to solubilize protein in slaughter blood (SB) using ultrasonic technology. The application of ultrasonic technology can make enzymatic degradation of SB more effective, which has no comparable alternative for treatment. The SB was homogenized by grinding it for 10 minutes at 10,000 rpm as a pretreatment for preventing its clotting, and then ultrasonic treatment was attempted to solubilize protein in SB. To maximize the efficiency of ultrasonic treatment for SB, the optimum condition of ultrasonic frequency (UF) was determined to be 20 kHz. To optimize the operation conditions of ultrasonification with 20 kHz of frequency, we used response surface methodology (RSM) based on ultrasonic density (UD) and ultrasonification time (UT). The solubilization rate (SR) of protein (%) was calculated to be $101.304-19.4205X_1+0.0398X_2+7.9411X_1{^2}+0.0001X_2{^2}+0.0455X_1X_2$. From the results of the RSM study, the optimum conditions of UD and UT were determined at 0.5 W/mL and 22 minutes, respectively, and SB treated under these conditions was estimated to have a 95% SR. Also, experimentally, a 95.53% SR was observed under same conditions, accurately reflecting the theoretical prediction of 95%.

• 한국전기전자재료학회논문지
• /
• 제20권11호
• /
• pp.948-952
• /
• 2007

In this study, a low temperature sintering multilayer piezoelectric transformer for a DC-DC converter was manufactured using $(Pb,Ca,Sr,)(Ti,Mn,Sb)O_3$ ceramics. Its electrical properties were investigated according to the variation in frequency and load resistance. The voltage step-up ratio of the multilayer piezoelectric transformer showed a maximum value at a resonant frequency of input part and increased with an increase of load resistance. The efficiency of the multilayer piezoelectric transformer showed the highest value at a load resistance of 17 $\Omega$. The output power was increased with increasing input voltage. Temperature increase of the multilayer piezoelectric transformer was increased with the increase of output power. At the load resistance of 17 $\Omega$, the multilayer piezoelectric transformer showed the temperature rises of about $20^{\circ}C$ at the output power of 18 W, and stable driving characteristics.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.603-608
• /
• 2019

In this study, the multilayered thin films of (Ba,Sr)TiO3/K(Ta,Nb)O3 were fabricated by the sol-gel and spin coating methods, and their structural and electrical properties were investigated. The specimen showed polycrystalline X-ray diffraction (XRD) characteristics with a tetragonal structure. The average grain size and film thickness for one coating were about 30~40nm and 60nm, respectively. The phase transition temperature of specimen was lower than 10 ℃. The dielectric constant and loss at 20 ℃ of the specimen coated six times were 1,231 and 0.69, respectively. The rate of change in dielectric constant at an applied direct current (DC) voltage of the six times coated thin films was 17.3%/V. The electrocaloric effect was the highest around the temperature at which the remanent polarization rapidly changed. When an electric field of 660kV/cm was applied to the triply coated thin films, the highest electrocaloric property of 4.41 ℃ was observed.

• 한국가축번식학회지
• /
• 제20권2호
• /
• pp.197-205
• /
• 1996

This study was conducted to examine the effect of sustained release recombinant bovine somatotropin(SR-rBST) with different dosage(0, 0.03mg/kg body weight/14 day, 0.06mg/kg body weight/14 day, 0.09mg/kg body weight/14 day) on the economical traits of the semen characteristics and sexual behaviors and blood chemical values with sixteen Holstein dairy young bulls in Dairy Cattle Improvement Center of National Livestock Co-operatives Federation. Sensual testings of collected semens of Holstein young bulls were not different among treatments (p>0.05). Ejaculated semen volumes of control, SR-rBST 0.03mg, 0.06mg and 0.09mg groups were 5.6ml, 5.6ml, 6.0ml and 6.7m, respectively, but the result of SR-rBST 0.09mg group significantly increased semen volume(P<0.05). In sperm concentration, SR-rBST 0.06mg and 0.09mg groups significantly increased the total number of sperms than the other groups(P<0.05). In otherwise, SR-rBST treatments did not affect on pH, osmotic pressure, anti forzen rate, abnormality and motility of collected semen during whole experimental period. Reaction time(RT), sexual aggressiveness(SA) and tactile stimulation(TS) were not different among treatments. The libido scores(LS) of control, 0.03mg, 0.06mg and 0.09mg groups were 68.0, 80.5, 73.9 and 80.8, respectively, and LS were significantly improved by SR-rBST administration(P<0.05). The effect of SR-rBST on scrotal circumference measurement that is important factor to determine the ability of semen production, was not different among treatments. These studies indicates that SR-rBST treatments favourably affect on semen quality and sexual libido in Holstein young bull.

• 한국전기전자재료학회논문지
• /
• 제13권12호
• /
• pp.1011-1016
• /
• 2000

The (1-x)MgTi $O_3$-xSrTi $O_3$(x=0.02~0.08) ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 125$0^{\circ}C$~1375$^{\circ}C$ and 2hours. The structure and microwave dielectric properties were investigated with sintering temperature and composition ratio. From the X-ray diffraction patterns, the cubic SrTi $O_3$and hexagonal MgTi $O_3$structures were coexisted in the (1-x)MgTi $O_3$-xSrTi $O_3$(x=0.02~0.08) ceramics. The dielectric constant($\varepsilon$$_{r}$) was increased and the temperature coefficient of resonant frequency($\tau$$_{f}$)was decreased with addition of SrTi $O_3$. The temperature coefficient of resonant frequency($\tau$$_{f}$) was gradually varied from negative value to positive value with increasing SrTi $O_3$. In the case of 0.96MgTi $O_3$-0.04SrTi $O_3$ceramics sintered at 130$0^{\circ}C$, the dielectric constant, quality factor and temperature coefficient of resonant frequency were 20.5, 5918(at 7.33GHz) and +10ppm/$^{\circ}C$, respectively.y.y.y.

• Bulletin of the Korean Chemical Society
• /
• 제20권8호
• /
• pp.977-979
• /
• 1999

• BMB Reports
• /
• 제49권11호
• /
• pp.612-616
• /
• 2016

CD44 pre-mRNA includes 20 exons, of which exons 1-5 ($C_1-C_5$) and exons 16-20 ($C_6-C_{10}$) are constant exons, whereas exons 6-15 ($V_1-V_{10}$) are variant exons. $V_6$-exon-containing isoforms have been known to be implicated in tumor cell invasion and metastasis. In the present study, we performed a SR protein screen for CD44 $V_6$ splicing using overexpression and lentivirus-mediated shRNA treatment. Using a CD44 $V_6$ minigene, we demonstrate that increased SRSF3 and SRSF4 expression do not affect $V_6$ splicing, but increased expression of SRSF1, SRSF6 and SRSF9 significantly inhibit $V_6$ splicing. In addition, using a constitutive exon-specific primer set, we could not detect alterations of CD44 splicing after SR protein-targeting shRNA treatment. However, using a $V_6$ specific primer, we identified that reduced SRSF2 expression significantly reduced the $V_6$ isoform, but increased $V_{6-10}$ and $V_{6,8-10}$ isoforms. Our results indicate that SR proteins are important regulatory proteins for CD44 $V_6$ splicing.

• 한국융합학회논문지
• /
• 제8권11호
• /
• pp.313-319
• /
• 2017

본 논문에서는 전기자동차의 핵심부품인 DC-DC 컨버터를 LLC공진형 컨버터에 신소재(Ga-N HEMT)를 이용하여 설계함으로써 소형화가 가능하며, 공진주파수를 자유롭게 변경할 수 있으며, 2차측 출력부에 SR Topology를 추가하여 전원장치의 동작 시 효율 및 온도특성을 개선하는 설계기법을 제안하였다. 이를 통해 고효율과 소형화를 얻을 수 있도록 회로를 구성하였으며, 제안된 컨버터는 200[kHz]의 높은 스위칭주파수를 가지고 동작시키게 됨으로써 스위칭주파수의 변화 및 회로구현의 장점과 스위칭주파수의 극대화로 인해서 LLC 및 PFC의 사이즈를 40[%] 최소화 할 수 있었으며, 동작온도의 특성이 250W(12V/20A)에서 온도를 측정한 결과 방열판 없이 $60{\sim}65^{\circ}C$를 나타냄을 확인하였다. 이러한 설계결과를 토대로 향후 1[kW]이상까지 구현하고자 한다.

• 한국세라믹학회지
• /
• 제55권4호
• /
• pp.364-367
• /
• 2018

The phase evolution, microstructure, and microwave dielectric properties of Sr-substituted $Ba(Mg_{0.5}W_{0.5})O_3$ ceramics, i.e., $(Ba_{1-x}Sr_x)(Mg_{0.5}W_{0.5})O_3$ ($0{\leq}x{\leq}0.30$), sintered at $1700^{\circ}C$ for 1 h were investigated. All compositions showed a 1 : 1 ordered perovskite structure. In all the compositions, $BaWO_4$ was detected as the secondary phase. With increasing x in ($Ba_{1-x}Sr_x$) $(Mg_{0.5}W_{0.5})O_3$, the lattice parameter increased linearly, indicating that a substitutional solid solution occurred. All compositions exhibited a dense microstructure. The value of ${\varepsilon}_r$ increased slightly with increasing x. The value of $Q{\times}f_0$ increased with the increase in x up to x = 0.10 and reached a saturated value of about 100,000 GHz. The composition for x = 0.20, i.e., $(Ba_{0.80}Sr_{0.20})(Mg_{0.5}W_{0.5})O_3$, sintered at $1700^{\circ}C$ for 1 h exhibited superior microwave dielectric properties of ${\varepsilon}_r=19.6$, $Q{\times}f_0=99,358GHz$, and ${\tau}_f=0.0ppm/^{\circ}C$, respectively.