• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.311-312
• /
• 2007

In this study, composite $BaSrTiO_3$ has been studied for high frequency device applications. Composite $Ba_{0.5}Sr_{0.5}TiO_3$ has high dielectric permittivity and low loss tangent at the relative frequency range from MHz to GHz. 10,30 and 50 wt% of epoxy doped $Ba_{0.5}Sr_{0.5}TiO_3$ powders were prepared with bisphenol A and F polymer employing ball milling process. Epoxy/($BaSrTiO_3$) composites thick films were screen printed on the Cu plated PCB substrates through screen printing methods. The specimens were designed for the embedded capacitor applications. Temperature dependent dielectric permittivity of Epoxy doped $BaSrTiO_3$ ceramics was measured.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.1
• /
• pp.11-18
• /
• 1996

A greenhouse experiment on the Sr-90 uptake by peanut and sesame was conducted through pot cultures on a sandy loam soil of pH 6.35 treated with Sr-90 in 5.2 and 31.2Bq per gram. The rate of Sr-90 transfer from soil to each plant part, the ratio of Sr-90 concentration in the part to the concentration in soil, and the patterns of their temporal changes were not, on the whole, significantly different between the two treatments. About 0.7 and 0.5 % of Sr-90 in soil transferred to all the mature plants of peanut and sesame, respectively, with the radioactivities in their roots not counted. Only 4% and less than 15% of Sr-90 absorbed by peanut and sesame, respectively, translocated to their seeds. Both crops showed the highest Sr-90 concentration in the leaf and the lowest in the seed. At maturities, the concentration ratio in dry seed was 0.4 in peanut and 3.3 in sesame and that in dry leaf was 12.5 and 10.7, respectively. Sr-90 concentrations in the top 15 cm soil after harvests averaged about 80 % of the concentrations at starting. Sr-90 uptake resulted in neither growth inhibition nor yield decrease.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.430-434
• /
• 2001

The algicidal activity of Shewanella (formerly Alteromonas) sp. SR-14 against diatom, Chaetoceros calcitrans was reported in our previous papers. In this study, the effect of Vibrio alginolyticus on the algicidal activity of Shewanelia sp, SR-14 was examined under the optimum algicidal conditions, i.e., temperature ($21\pm1^{\circ}C$), light intensity (4,000 lux), and light: dark cycle (12 hour: 12 hour). Shewanella sp. SR-14 grew well in the presence or the absence of V. alginolyticus in Conwy medium. Algal growth was only inhibited by Shewanella sp. SR-14. V. alginolyticus did not show the algicidal activity, Growth of C. calcitrans increased synergistically with growth of V. alginolyticus. When the initial inoculum of V. alginolyticus was only 1 log cycle higher than that of Shewanella sp. SR-14, the effect of V. alginolyticus on the algicidal activity of Shewanella sp. SR-14 was insignificant during incubation of mixed culture, i.e., two bacterial species and the alga. However, when V. alginolyticus dominated Shewanella sp. SR-14 by 3 log cycles of bacterial counts, it was found that the strain SR-14 could not inhibited growth of C. calcitrans up to 5 days of incubation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.18-24
• /
• 2000

(Ba,Sr)$TiO_3$ thin films have attracted great interest as new dielectric materials of capacitors for ultra-large-scale integrated dynamic random access memories (ULSI-DRAMs) such as 1 Gbit or 4 Gbit. In this study, inductively coupled $BCl_3/Cl_2/Ar$ plasmas was used to etch (Ba,Sr)$TiO_3$ thin films. RF power/dc bias voltage=600 W/-250 V and chamber pressure was 10 mTorr. The $Cl_2/(Cl_2+Ar)$ was fixed at 0.2 the (Ba,Sr)$TiO_3$ thin films were etched adding $BCl_3$. The highest (Ba,Sr)$TiO_3$ etch rate is $480{\AA}/min$ at 10 % $BCl_3$ to $Cl_2/Ar$. The change of Cl, B radical density measured by optical emission spectroscopy(OES) as a function of $BCl_3$ percentage in $Cl_2/Ar$. The highest Cl radical density was shown at the addition of 10% $BCl_3$ to $Cl_2/Ar$. To study on the surface reaction of (Ba, Sr)$TiO_3$ thin films was investigated by XPS analysis. Ion bombardment etching is necessary to break Ba-O bond and to remove $BaCl_2$. There is a little chemical reaction between Sr and Cl, but Sr is removed by physical sputtering. There is a chemical reaction between Ti and Cl, and $TiCl_4$ is removed with ease. The cross-sectional of (Ba,Sr)$TiO_3$ thin film was investigated by scanning electron microscopy (SEM), the etch slope is about 65~70$^{\circ}$.

• Journal of Radiation Protection and Research
• /
• v.11 no.2
• /
• pp.104-113
• /
• 1986

The ion exchange behaviour of the $Cs^{+1},\;Sr^{+2},\;and\;Th^{+4}$ in the system of $Cs^{+1},\;Sr^{+2},\;Th^{+4},\;and\;7Cl^{-}-H^{+}$ from Dowex HCR-W2, was examined in the loading and elution processes. $Th^{+4}$ was slowly adsorbed through the entire contact time between resin and solution and $Cs^{+1}\;and\;Sr^{2+}$ were adsorbed fast for the first few minutes of contact time. Because of the strong affinity of $Th^{+4}$, the longer contact time was allowed, the less amount of $Cs^{+1}\;and\;Sr^{2+}$ was adsorbed on the resin. The peak concentration of the resin phase $Cs^{+1}$ in the solution concentration of $Cs^{+1}:Sr^{+2}:Th^{+4}$ in the ratio of 2 : 2 : 1 in normality with total normality of 0.1N was produced at about 4 minutes of contact time and the peak time for $Sr^{+2}$ was 20 minutes. The loaded ions were eluted using hydrochloric acid. The loaded $Cs^{+1}$ was eluted at the low eluent concentration of less than 0.1N with less than 5% contamination of $Sr^{+2}$. The loaded $Th^{+4}$ was eluted at the high eluent concentration of greater than 1N. The best eluent concentration for eluting $Th^{+4}$ was 4N.

• Korean Chemical Engineering Research
• /
• v.44 no.3
• /
• pp.284-288
• /
• 2006

$(Ca,Sr)_{2-y}MgSi_2O_7:Eu^{2+}{_y}$ (CMS) phosphor particles were prepared by using a spray pyrolysis process. The luminescent property was optimized by changing the content of Eu and the post-treatment temperature. The luminescence characteristics were also monitored with changing the ratio of Ca to Sr. The pure tetragonal $Ca_2MgSi_2O_7$ or $Sr_2MgSi_2O_7$ particles were obtained when the post-treatment temperature was over $1,000^{\circ}C$. The highest emission intensity of CMS particles were achieved when the concentration (y) of Eu and the treatment temperature were 0.05 and $1,250^{\circ}C$,respectively. The emission wavelength $({\lambda}_{max})$ of ${(Ca_{1-x},Sr_x)}_{1.95}MgSi_2O_7:{Eu^{2+}}_{0.05}$ was gradually shifted from 524 nm to 456 nm with increasing the content of Sr due to the reduction of crystal field strength. The emission intensity and its width of $Sr_2MgSi_2O_7:Eu$ was greatly enhanced by substituting Ca of less than 10 mol％ for Sr without any significant peak shift. The morphology of as-prepared particles was spherical, but changed to irregular-shaped one after the post treatment at the temperature range from 900 at $1,300^{\circ}C$.

• Journal of Radiation Protection and Research
• /
• v.15 no.2
• /
• pp.41-49
• /
• 1990

$^{88}SrCl_2$ was injected to the tail vein of Wistar rats and investigated its distribution and clearance in the tissues and blood. We also measured the changes in Sr binding to the blood plasma protein by administrating chelating agents and organic acids. For the blood, 60% of the Sr occurred in the plasma and 40% on the cell membrane. Fifty percent of Sr in the blood plasma was bound to plasma protein. Sr on the cell membrane seemed to be bound loosely. The binding in the lymphocyte was higher than in the erythrocyte .and granulocyte. Within one hour Sr was quickly disappeared from the blood stream, to be accumulated in the bone. Twenty four hours after the injection, Sr decreased rapidly in the organs of soft tissue, but slowly in the bone. The binding of Sr to plasma protien decreased from 57% of the control to 27-33% in the group treated with chelating agents, EDTA, EGTA and DTPA and to 19% and 40% in the groups treated with organic acids, citrate and oxalate, respectively.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.513-517
• /
• 2013

This study focused on the synthesis of $Nb_xSrTi_{1-x}O_3$ photocatalysts which partially inserted Nb ions with excellent ability of fluorescence into the perovskite structured $SrTiO_3$ frameworks and their photocatalytic hydrogen productions from methanol/water splitting corresponding to the molar ratios of Ti and Nb. The characteristics of the synthesized $SrTiO_3$ and $Nb_xSrTi_{1-x}O_3$ powders were analyzed by X-ray diffraction (XRD), energy dispersive X-ray spectrometer (EDS), and UV-Visible spectrometer. The hydrogen evolution from methanol/water photo-splitting was enhanced over $Nb_{0.05}SrTi_{0.95}O_3$ compared to those over $SrTiO_3$ and another $Nb_xSrTi_{1-x}O_3$; 4.9 mL of hydrogen gases was collected after 8 h when 0.5g of $Nb_{0.05}SrTi_{0.95}O_3$ catalyst was used in pH 10.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.2
• /
• pp.31-38
• /
• 1987

The present study was carried out to determine the effect of the physical, chemical and mineralogical properties of paddy soil on the adsorption and desorption of $Sr^{90}$ from absorbed soils. The results obtained were as follows: 1. Most of the adsorbed $Sr^{90}$ was exchangeable and water soluble. $Sr^{90}$ extracted by ammonium acetate was very high compared to the water soluble fractions, and the ammount decreased with the increase of calcium application, but increased proportionally with the increase of $Sr^{90}$ treatment. 2. The distribution of $Sr^{90}$ in paddy soil depend on the soil type. Average-distribution rates of water soluble, exchangeable and non-exchangeable fractions of $Sr^{90}$ in the soils were 28.6%, 59.3% and 12.1% respectively. 3. The non-exchangeable from of $Sr^{90}$ was high in the soils of high illite and low vermiculite content. 4. The desorption of $Sr^{90}$ from adsorbed soils decreased with the increase of pH and ex-cations of the soils, but increased with the amount of organic matter and clay content in the soil.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.647-651
• /
• 2002

Eleven salt replacements$(SR-1{\sim}SR-11)$ composed of NaCl, KCl, $MgSO_4,\;CaSO_4$, lysine or glutamic acid were prepared and used for the preparation of low salt Kimchi instead of NaCl alone. Some chemical and microbiological characteristics of the low-salt Kimchi with 2.5% salt replacement were determined during the fermentation at $20^{\circ}C$. The pH decrease and acidity increase of low-salt Kimchi were slower than those of control Kimchi with NaCl alone. The total number of microorganism in SR-8 Kimchi added L-lysine was lower than that of control Kimchi until 5 days of fermentation. However, there was no difference in the numer of lactic bacteria between low-salt Kimchi and control Kimchi. The growth of yeasts was found to be slow in low-salt Kimchi with SR-8. The low-salt Kimchi with SR-3 showed the hardest texture among the prepared Kimchi. The overall acceptabilities of low-salt Kimchi prepared with SR-1, SR-3 composed of NaCl, KCl, $MgSO_4,\;CaSO_4$, and SR-10 added 0.2% glutamic acid to the elements were similar to the control Kimchi.