• 한국지형공간정보학회:학술대회논문집
• /
• 1997.12a
• /
• pp.17-25
• /
• 1997

스트립 방식으로 촬영된 위성영상의 기하학적 모델링시에는 일반적으로 단위모델별로 위성영상에서 식별이 용이한 지점을 지상기준점으로 선정하여 영상에서의 좌표를 해석도화기나 컴퓨터 화면상에서 획득하고, 그에 대응하는 지상좌표는 현지측량이나 기본지도로부터 얻는다. 현지측량방법의 경우에는 정확하고 신뢰성있는 좌표를 제공해 줄 수 있는 반면에 현지로의 접근이 용이해야 하고 비용과 시간이 많이 소요되며, 소축척의 기본지도상에서 직접 독취하는 경우에는 지도자체에 내재된 오차의 정도가 불명확하고 지상기준점으로 선정한 지점이 명확히 표기되어 있지 않은 경우가 있으므로 영상좌표 측정시에 오차의 유발 가능성이 크다. 특히 영상 해상도 $5{\sim}10m$의 연속된 화상을 3차원 기하학적 모델링을 수행하기 위하여 현지측량에 의해 지상기준점을 획득하는 방법은 경제성 및 효율성 측면에서 불리하다. 따라서 본 연구에서는 삼각점 조서를 이용하여 연속촬영된 SPOT 위성영상을 스트립 단위로 모델링하여 영상해상도 수준의 위치정확도를 얻을 수 있는 연속화상 모델링기법을 제시하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.10-19
• /
• 1998

The erosion of electrode in spot welding of aluminium alloy by direct current is dependent on the electric polarity. The positive electrode is much more eroded than the negative one. To explain this phenomenon, Peltier effect has been generally accepted as a unique theory. In this study Peltier effect was evaluated by calculations on the basis of some references and experiments. The difference of heat generated by Peltier effect on both electrode surfaces was, however, only 4% of total heat generated during wel- ding. Because of insufficient explanation, Kohler theory, which is mainly affected by thin oxide film, was introduced. A theoretical calculation showed 17% of the temperature difference between the positive and negative electrode, in case "surface voltage" resulted from oxide film was 30% of total contact voltage. This revealed that the erosion of electrode could be more affected by Kohler theory than effect.an effect.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.6
• /
• pp.173-181
• /
• 2000

The stability of a structural plate is a crucial problem which causes wrinkling and buckling. In this paper, the effect of the pattern of spot-welding points in the two rectangular plate on the shear buckling load is studied with respect to the thickness, the aspect ratio of plates, the number of welding spots. Buckling coefficient of the simple plate was compared with that of two plates with various conditions to extract the effect of buckling strength. The effect of the number of welding spots are studied in two directions, longitudinal and transverse directions. The concluded that the reinforcement effect was maximized when the aspect ratio was close to 1.5 and that the effect of number of welding spots in longitudinal direction was larger than that in transverse direction.

• Journal of Welding and Joining
• /
• v.10 no.1
• /
• pp.52-59
• /
• 1992

Resistance spot weldability of cold rolled 80kg/mm$^{2}$ and 45kg/mm$^{2}$ grade high strength steel sheets for automobile structure was investigated focussing on the influences of welding parameters such as welding current and welding time on the weld strength and the nugget formation. The results of this study showed that the optimum ranges of welding current for the grade 80 and grade 45 were 5.0 cycle(250 m sec.) It was also shown that the tensile shear strength of the resistance spot weld was strongly influenced by both current and time applied in welding procedure, however, the tensile shear strength was mainly affected by welding time for the higher strength steel.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.219-221
• /
• 2006

In an attempt to optimize friction spot joining process of Al alloys for automobiles, Friction spot joining was used make lap feint on strips of AA5052-H32 and AA6022-T4 aluminium alloy. The effects of joining parameters such as tool rotating speed, plunging depth, joining time and kind of upper plate on the joints properties were investigated. An optimal tensile shear strength parameter of a tool rotating speed of 1000rpm, dwell time 2.5sec with upper plate 6022 can be found to make a good joint.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.195-201
• /
• 2000

The fundamental spot welded sections of automobiles (hat-shaped and double hat-shaped sections) absorb most of the energy in a front impact collision. The sections of various thickness, shape and weld width on the flange lave been tested on axial impact crush load (Mass 40kg, Velocity 7.19m/sec) using a vertical air pressure crash est device Characteristics of impact collapse have been reviewed and a structure of optimal energy absorbing capacity is suggested.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.153-161
• /
• 1993

We analyze 211 data of the daily sunspot observations during the period of January 4 to November 30 in 1993 and present the daily relative sunspot numbers. During 334 days of the period, the preliminary annual average of the relative sunspot numbers is found to be 61.8 based on 27.1 distinct spots in a single group for 3.7 spot groups. According to the appearance of 203 spot groups, our analysis shows that the mean life time of spot group is about 1 day and 15.5 hours. Our records show that more number of sunspots have appeared in the southern hemisphere than in the northern hemisphere by some 2%, indicating that the solar activities of the northern and southern hemisphere are much the same during the period.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.397-406
• /
• 2003

Resistance spot welding is widely employed in a manufacturing process. In recent years, the requirement for more sophisticated quality control procedures has been in mass production industries. The requirements for high productivity and better weld qualities have lead to the development of more widely available microcomputer-based control. In this study, the inverter type power source and welding servo gun are developed. As the results, we have some advantages over the previous methods such as pneumatic gun. One of them is that the precise pressure control can be attained during the welding process. In addition, production time and cost can be decreased.

• Korean Journal Plant Pathology
• /
• v.14 no.6
• /
• pp.664-667
• /
• 1998

Leaf spot of Cymbidium hybrida caused by Fusarium sp. was observed at major cultivating areas including Seosan and Cheonan of Korea from 1996 to 1998. The major symptoms of the disease were small brown to black spots, 1∼2 mm I diameter, with yellow halo. Based on the mycological characteristics, Fusarium sp. isolated from the lesions was identified as Fusarium proliferatum. Macroconidia were slender, falcate to almost straight, usually 3 to 5 septate and thin walled. Microconidia were formed in chains from polyphialides, clavate or oval, usually 1-celled with flattened base. Chlamydospores were absent. The fungus showed pathogenicity to Cymbidium hybrida.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.74-83
• /
• 2001

In this study, internal fatigue crack initiation and propagation behavior were investigated by triple piece spot welded specimen. To estimate fatigue life of the specimen varied with shape and thickness, Crack tip opening angle(CTOA) correlated with stress intensity factor was used as the stiffness parameter. The relation between fatigue life and CTOA can be arranged by the quantitative equation for each specimen by experiment. In addition, the variation of stress distribution was solved and the effect on fatigue crack behavior was examined by finite element method(FEM).