• 한국음향학회지
• /
• 제27권4호
• /
• pp.163-170
• /
• 2008

대부분의 바닥충격음측정은 반사성 재질로 마감된, 가구도 커튼도 없는 수 미터 치수의 장방형 공실에서 이루어진다. 이러한 공간에서 저주파 모드의 발생을 피하는 일은 쉽지 않다. 현재의 측정표준에 따른 중량 바닥충격음 측정의 재현성과 신뢰성을 저해하는 가장 큰 요인은 이러한 저주파 모드 중첩 현상이며, 그 측정의 편차는 63Hz 대역에서 때론 10dB에 이르는 경우도 있다. 이 연구에서는 중량바닥충격음 측정의 편차원인인 저주파 대역 모드중첩의 영향을 줄일 수 있는 보다 신뢰성 있는 측정방법을 찾고자 하였다. 그 방법으로 수음실의 모드 중첩 현상 자체를 제어하는 방법과 어느 정도 모드가 존재하는 상황에서도 수음실 공간 전체의 음압레벨 평균에 가깝게 측정할 수 있는 방법의 두 가지에 대하여 실험하였다. 실험의 결과 저음흡음재 보다 베이스 트랩을 이용하여 수음실의 울림을 줄이는 방식은 수음실의 모드중첩을 제어하는 데는 효과가 있지만 현실적으로 다양한 측정 현장에서 저음 잔향시간을 $1{\sim}2$ 초 사이로 구현하는 일이 쉽지 않음이 단점으로 드러났다. 마이크로폰을 회전시키면서 공간적 평균을 구하는 방식은 측정이 복잡하지도 않으며 쉽게 많은 수음점을 확보하여 수음실 전체 공간을 통한 측정값과 근소한 오차를 보이는 것으로 밝혀졌다.

• 한국간담췌외과학회지
• /
• 제26권1호
• /
• pp.91-97
• /
• 2022

Backgrounds/Aims: Metastatic lesions of the pancreas (PMET) account for 1%-5% of all malignant solid pancreatic lesions (SPL). In this study we evaluated the utility of endoscopic ultrasonography with fine needle aspiration (EUS-FNA) in diagnosing PMET. Methods: Patients who underwent EUS-FNA at a community referral center between 2011-2017 for SPL were identified. Clinical, radiologic, and EUS-FNA features of those with PMET were compared to those with primary solid tumors of the pancreas: pancreatic adenocarcinoma (PDAC) and neuroendocrine tumors (PNET). Results: A total of 191 patients were diagnosed with solid pancreatic malignancy using EUS-FNA: 156 PDAC, 27 PNET, and eight (4.2%) had PMET. Patients with PMET were less likely to have abdominal pain (25.0% vs. 76.3% vs. 48.2%; p < 0.01) or obstructive jaundice (37.5% vs. 58.3% vs. 0%; p < 0.01) compared to PDAC and PNET. Those with PMET were more likely to have mass lesions with/without biliary or pancreatic ductal dilatations (100% vs. 86.5% vs. 85.2%; p < 0.01) and lower CA19-9 (82.5 ± 43.21 U/mL vs. 4,639.30 ± 11,489.68 U/mL vs. 10.50 ± 10.89 U/mL; p < 0.01) compared to PDAC and PNET. Endosonographic features were similar among all groups. Seven (87.5%) patients with PMET had a personal history of malignancy prior to PMET diagnosis. The primary malignancy was renal cell carcinoma in five PMET. Conclusions: PMET are exceedingly rare, comprising less than 5% of SLP. Patients with PMET are less likely to present with symptoms and mostly identified by surveillance imaging for the primary malignancy.

• The Journal of the Acoustical Society of Korea
• /
• 제24권4E호
• /
• pp.139-143
• /
• 2005

The present study aims to investigate the effects of speaker location on the speech intelligibility in a classroom. In order to this, acoustic measurements were undertaken in a classroom with three different sound source locations such as center of front wall (FC), both sides of front wall (FS) and the center of ceiling (CC). SPL, RT, $D_{50}$, RASTI were measured in the 9 measurement points with same sound power level of sound source and MLS was used as the sound source signal. Also, subjective listening tests were carried out using Korean language listening materials which were recorded in an anechoic chamber. The recorded syllables were replayed and recorded again in the classroom with same sound source at three different locations and listening tests were undertaken to 20 respondents who were asked to write the correct syllables which were recorded in the classroom. The results show that higher sound intelligibility ($D_{50}$ of $47\%$, RASTI of 0.56) was obtained when sound source was located at the FS. The results also show that high sound intelligibility was obtained at the area nearby walls.

• 교육시설
• /
• 제10권4호
• /
• pp.5-20
• /
• 2003

The purpose of the research on the noise of educational facilities is to build up pleasant environments by minimizing the influence on the students in the school. This study provides fundamental data for acoustic design by measuring, computer simulation and analyzing the room acoustic characteristics of the lecture room in middle school. For measurement on the factors of room acoustic, RT of lecture room and noise reductions depending on various walls of different structures were measured and analyzed. The lecture system being installed and carried out on the normal lecture room was divided into 4 types-employment of multimedia machines, employment of multimedia machines and loud speakers, employment of loud speaker, and existing verbal speaking-and SPL for each type was measured and analyzed. Based on the measured characteristics of acoustic characteristics for normal lecture room, the problems for environment of noise were understood through computer simulation, applications for improvements of performance for each facility were studied, schemes for improvements of performance by using the effects were presented, necessary fundamental data were secured, and schemes to enhance flexibility on the existing facilities of school against changing educational courses were secured.

• 정보저장시스템학회논문집
• /
• 제8권2호
• /
• pp.72-77
• /
• 2012

The demand for the laptop computer has been increased day by day and most of users ask quiet computer and devices to work in comfortable environment. One of the devices which generate acoustic noise is an external ODD. Unlike the internal ODD, the external ODD is easy to emit noise because it runs outside of the computer and also it is packed with a thin plastic covers. As the disk rotates, vortex flow is generated inside of the cavity due to various and complicated mold parts of the cover. In addition, there is a gap between the disk tray and the upper/lower cases, through which the air flows as well as the noise leaks. In this study, we have proposed how to reduce the acoustic noise of an external ODD using numerical and experimental analysis. The pressure fluctuations and turbulent kinetic energy distributions are calculated for the developed model. The results show that the sound pressure level is reduced by 2.3dB through simple modifications of ribs of the top cover, which remove or suppress flow instabilities inside of the cavity.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
• /
• pp.451-454
• /
• 2000

실의 음향성능을 규명하기 위하여 많은 음향인자가 개발되어지고 제시되어 왔다. 음향인자 중 확산은 실의 전반적인 음향성능에 매우 유용한 것으로 여겨져 왔다. 본 연구는 장방형의 형태를 가지고 체적과 마감재료가 같은 2종류의 축척모델을 제작하여 각각의 모델에서 RT, EDT, SPL, C, IACC 등을 측정하여 확산체의 유$\cdot$무에 따른 실의 실내음향 성능을 알아보고자 한다 실험결과 실내 표면의 확산성의 차이에 따라 표면의 확산성이 좋은 공간에서 초기음장에서 음에너지가 집중되고 분산되는 것을 입증하였다. 즉 확산성이 좋은 모델에서 잔향시간(RT)은 더 짧으나 초기감쇠시간(EDT)이 더 길게 나타남으로 인하여 음에너지의 분포가 실의 확산상태에 의하여 음의 발생이후 짧은 시간내에 집중하여 전달되고 있음을 증명하였다. 또한 실의 확산상태가 좋은 공간의 명료도가 확산이 되지 않은 실에 비하여 훨씬 더 좋은 결과를 보이고 있음을 나타냈다. 이상의 결과를 종합하여 볼 때 실내 표면의 확산성이 전반적인 실내 음장의 향상에 크게 기여하고 있음을 밝혀 냈다.

• 한국멀티미디어학회논문지
• /
• 제20권8호
• /
• pp.1395-1405
• /
• 2017

In this paper, we analyses heart beat data to identify subjects stress state (binary) using heart rate variability (HRV) features extracted from heart beat data of the subjects and implement supervised machine learning techniques to create the mental stress classifier. There are four steps need to be done: data acquisition, data processing (HRV analysis), features selection, and machine learning, before doing performance measurement. There are 56 features generated from the HRV Analysis module with several of them are selected (using own algorithm) after computing the Pearson Correlation Matrix (p-values). The results of the list of selected features compared with all features data are compared by its model error after training using several machine learning techniques: support vector machine, decision tree, and discriminant analysis. SVM model and decision tree model with using selected features shows close results compared to using all recording by only 1% difference. Meanwhile, the discriminant analysis differs about 5%. All the machine learning method used in this works have 90% maximum average accuracy.

• Advances in aircraft and spacecraft science
• /
• 제5권4호
• /
• pp.477-498
• /
• 2018

The main goal of this article is to validate a methodological process in Actran MSC Software, that is based on the Finite Element Method, to evaluate the comfort in the cabin of a regional aircraft and to study the noise and vibrations reduction through the fuselage by the use of innovative materials. In the preliminary work phase, the CAD model of a fuselage section was created representing the typical features and dimensions of an airplane for regional flights. Subsequently, this model has been imported in Actran and the Sound Pressure Level (SPL) inside the cabin has been analyzed; moreover, the noise reduction through the fuselage has been evaluated. An important investigation and data collection has been carried out for the study of the aircraft cabin to make it as close as possible to a real problem, both in geometry and in materials. The mesh of the structure has been built from the CAD model and has been simplified in order to reduce the number of degrees of freedom. Finally, different fuselage configurations in terms of materials are compared: in particular, aluminum, composite and sandwich material with composite skins and poroelastic core are considered.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.966-970
• /
• 2006

We reported on characteristics of the piezoelectric ceramic-polymer composite for the application of the thick-film speaker. The PVDF-PZT composites were fabricated to incorporate the advantages of both ceramic and polymer with various mixing ratios by 3-roll mill mixer. The composite solutions were coated by the conventional screen-printing method on ITO electrode coated PET (Polyethylene terephthalate) polymer film. After depositing the top-electrode of silver-paste, 4 kV/mm of DC field was applied at $120^{\circ}C$ for 30 min to poling the composite films. The value of $d_{33}$ (piezoelectric charge constant) was increased when the PZT weight percent was increased. The maximum value of the $d_{33}$ was 24 pC/N at 70 wt% PZT. But the $g{33}$ (piezoelectric voltage constant) showed the maximum value of $32mV{\cdot}m/N$ at 65 wt% of PZT powder. The SPL (sound pressure level) of the speaker fabricated with the 65:35 composite film was about 68 dB at 1 kHz.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.111-118
• /
• 2007

In order to investigate the noise characteristics of the different caviation, noise measurements were carried out in a large cavitation tunnel of the Samsuug Ship Model Basin(SSMB). The noise measurements for a 3-dimensional hydrofoil were carried out at the angle of attack of $12^{\circ}$ and $16^{\circ}$ according to the decrease in cavitation number. It is exhibited that sound pressure level(SPL) increased sharply with cavitation inception. The frequency of the noise induced by sheet cavitation was higher than that of tip vortex cavitation in the phase of cavitation inception. Within the range of the high frequency, in the case of fully developed cavitation, sheet cavitation noise was significantly increased in sound pressure level compared with tip vortex cavitation noise. In this study, the noise characteristics of the different cavitation types were considered experimentally and would be utilized as a basis for the analysis of propeller cavitation noise.