• 한국해양공학회지
• /
• 제25권6호
• /
• pp.72-79
• /
• 2011

In this paper, the fatigue characteristics of shot peened A7075-T651 alloy were compared with those of the specimens without the shot peening. The multi-spindle and single-spindle rotating bending fatigue testing machines were employed for the evaluation. Shot peening (SP) with various pressure (5 psi, 10 psi, 15 psi, 25 psi and 35 psi) were used in this test. In order to investigate the effect of the applied pressure during the SP, we carried out the surface roughness test, compressive residual stress test, hardness test, tensile test, VHCF (Very high cycle fatigue) test and SEM observation. SP induced the formation of remarkable compressive residual stress from the surface to certain depth of sample by means of the plastic deformation. The surface hardness and the fatigue characteristics of the specimens were also modified by the SP. According to the S-N curves, fatigue lives of shot peended sample with 25 psi measures 50 times higher than that of the untreated sample. The fatigue lives of shot peened sample with 15 psi and 35 psi measure approximately 10 times higher than that of the untreated ones.

• 대한기계학회논문집A
• /
• 제40권12호
• /
• pp.987-995
• /
• 2016

본 연구는 $ZrO_2$의 비커스 경도에 대한 쇼트 피닝 효과를 연구하였다. 쇼트의 크기는 ${\phi}180{\mu}m$와 ${\phi}300{\mu}m$를 사용하여 피닝하였다. 비커스경도는 압입하중 98 N과 294 N으로 측정하였다. 비커스 경도는 와이블 통계 해석을 수행하여, 볼 크기 및 압압 하중에 따르는 영향을 평가하였다. 척도 파라메터는 98 N 압입 하중 및 ${\phi}180{\mu}m$ 쇼트 볼에서 크게 나타났다. 형상 파라메터도 대체적으로 작은 쇼트 볼(180sp)이 크게 나타났다. 이것으로부터 SP처리에 의한 압축 잔류 응력은 $ZrO_2$의 기계적 성질의 향상에 좋은 방법이다.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.80-85
• /
• 2011

The Ultrasonic Nanocrystal Surface Modification (UNSM) technology improves the fatigue life of a torsion bar by inducing compressive residual stress on the surface layer. The UNSM is applied to replace the presetting method and shot peening technology. The torsion bar must be changed periodically because of a lack of durability and a phenomenon related to the stress relaxation. The torsion fatigue test specimens were made of DIN17221 material, and the results showed that the fatigue life was 5 times more than under durability test conditions. A comparison test between the commercial vehicles' presetting method and shot peened torsion bar and the UNSM torsion bar showed that the UNSM could replace the presetting method and shot peening.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1011-1017
• /
• 2023

In this study, the harmless crack size (a_hml) by double shot peening (DSP) using shot balls with different diameters was evaluated on carburized, quenched-tempered SCM822H steel. The minimum crack size (a_NDI) detectable by non-destructive inspection was also evaluated. The relationship between the crack size (a_25,50) that reduces the fatigue limit by 25% and 50% and a_hml was evaluated. The residual stress of DSP was greater in SP_(0.6+0.08) than SP_(0.8+0.08) and appeared deeper in the depth direction. In addition, the hardness below the surface appeared larger. The fatigue limit of DSP increased 2.07 times and 1.95 times compared to non-SP. All a_hml of the DSP specimen was determined at the depth (a). The compressive residual stress distribution affects a_hml, and the a_hml of SP_(0.6+0.08), which has a large compressive residual stress and a high fatigue limit, appeared large. a_hml of SP_(0.6+0.08) introduced deeper than the residual stress of SP_(0.8+0.08) is larger in the range of As=1.0-0.3. Since the residual stress in the thickness direction has a greater effect on a_hml than the residual stress at the surface, it is necessary to introduce it more deeply. The relation of a_hml, a_25,50, and a_NDI were evaluated in the point for safety and reliability.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1821-1828
• /
• 2010

레이저 샥 피닝(LSP)은 금속재료 표면처리를 위한 획기적인 기술로서 금속 부품의 피로성능 개선을 위해 최근에 널리 적용되고 있다. 널리 알려진 바와 같이 금속재료의 피로 균열은 재료의 응력 상태가 인장(Tension)하에서만 발생되고, 압축(Compression)상태에서는 발생하지 않는다. 따라서 피로수명 개선을 위해 전통적인 샷 피닝(SP)과 함께 다양한 분야에 응용되고 있으며, 특히 LSP 는 금속재료의 표면과 깊이방향에 대해 높은 압축잔류응력을 생성시켜 준다. 본 논문에서는 유한요소 해석기법을 이용하여 LSP 에 의해 발생되는 압축잔류응력 생성과정을 모사하고, 압축잔류응력에 영향을 미치는 다양한 변수에 대해 민감도 해석을 수행하였다.

• 대한기계학회논문집A
• /
• 제36권1호
• /
• pp.43-50
• /
• 2012

본 논문은 레이저 샥 피닝(LSP) 유한요소 시뮬레이션 관련 변수들이 인코넬 alloy 600 합금의 잔류 응력에 미치는 영향을 분석하였다. 특히, 레이저 피닝 공정 관련 변수인 최대 압력파, 압력파 지속시간, 레이저 스팟 크기 및 다중 레이저 샷의 영향을 확인하였다. 최대 압력파 및 압력파 지속시간은 alloy 600 재료물성에 따라 특정 범위에서 최대 압축잔류응력을 생성시켜 준다. 이 때문에 LSP 공정에서 최대 압력파 및 압력파 지속시간은 중요한 선택 변수가 된다. 일정한 크기 이상의 레이저 스팟은 잔류응력에 특별한 영향을 미치지 않음을 확인하였고, 다중 레이저 샷은 압축잔류응력 크기와 소성변형 발생깊이를 동시에 증가시키지만, 증가량은 레이저 샷 횟수가 증가할수록 감소하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.134-135
• /
• 2003

The dental implant materials required good mechanical properties, such as fatigue strength, combined with a high resistance to corrosion. For increasing fatigue resistance and delaying onset of stress corrosion cracking, shot peening has been used for > 50 years to extend service life of metal components. However, there is no information on the electrochemical behavior of shot peened and hydroxyapatite(HA) coated Ti-6Al-4V alloys. To increase fatigue strength, good corrosion resistance, and biocompatibility, the electrochemical characteristics of Ti/TiN/HA coated and shot peened Ti-6Al-4V alloys by electron beam physical vapor deposition(EB-PVD) have been researched by various electrochemical method in 0.9%NaCl. Ti-6Al-4V alloys were prepared under the condition of hydrogen and vacuum arc furnace. The produced materials were quenched at 1000$^{\circ}C$ under high purity dried Ar atmosphere and were hold at 500$^{\circ}C$ for 2 hrs to achieve the fatigue strength(1140㎫) of materials. Ti-6Al-4V alloys were prepared under the condition of hydrogen and vacuum arc furnace. Shot peening(SP) and sand blasting treatment was carried out for 1, 5, and 10min. On the surface of Ti-6Al-4V alloys using the steel balls of 0.5mm and alumina sand of 40$\mu\textrm{m}$ size. Ti/TiN/HA multilayer coatings were carried out by using electron-beam deposition method(EB-PVD) as shown Fig. 1. Bulk Ti, powder TiN and hydroxyapatite were used as the source of the deposition materials. Electrons were accelerated by high voltage of 4.2kV with 80 - 120mA on the deposition materials at 350$^{\circ}C$ in 2.0 X 10-6 torr vacuum. Ti/TiN/HA multilayer coated surfaces and layers were investigated by SEM and XRD. A saturated calomel electrode as a reference electrode, and high density carbon electrode as a counter electrode, were set according to ASTM GS-87. The potentials were controlled at a scan rate of 100 mV/min. by a potentiostat (EG&G Co.273A) connected to a computer system. Electrochemical tests were used to investigate the electrochemical characteristics of Ti/TiN/HA coated and shot peened materials in 0.9% NaCl solution at 36.5$^{\circ}C$. After each electrochemical measurement, the corrosion surface of each sample was investigated by SEM.