• Bulletin of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.674-678
• /
• 2002

The dehydrogenation of propane to propylene has been studied in an isothermal high-temperature shell-and-tube membrane reactor containing a Pd-coated ${\psi}$-Al2O3 membrane and a Pt/K/Sn/Al2O3 packed catalyst . A tubular Pd-coated ${\psi}$-Al2O3 membrane was prepared by an electroless plating method. This membrane showed high hydrogen to nitrogen permselectivities (PH2N2 = 10-50) at 400 $^{\circ}C$ and 500 $^{\circ}C$ with various transmembrane pressure drops. The employment of a membrane reactor in the dehydrogenation reaction, which selectively separates hydrogen from the reaction mixture along the reaction path, can greatly increase the conversion and enable operation of the reactor at lower temperatures. High hydrogen permselectivity has been confirmed as a key factor in determining the reactor performance of conversion enhancement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.711-714
• /
• 2002

촉매 구조에 따른 반도체식 가스센서의 가스 감지 특성이 고찰되었다. 촉매로는 Pd를 사용하였고, 0.5 ~ 10wt% 의 다양한 농도로 약 15nm 크기의 $SnO_2$ 분말에 도핑, 가스센서를 제작하였다. 또한 열처리 온도를 $500{\sim}600^{\circ}C$로 다르게 하여 각 촉매 구조에 따른 특성의 변화를 관찰하였다. 그 결과 가스 감지 특성은 열처리 온도가 높을수록 감지 특성이 향상되었고, Pd 농도가 5wt% 에서 감도가 0.65로 좋은 감지 특성을 나타내었다. 5wt% Pd가 도핑된 가스센서는 2시간 동안 $400^{\circ}C$에서 aging 후에도 감도 값이 안정된 우수한 특성을 나타내었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.818-821
• /
• 2003

Sn-doped $In_{2}O_{3}$ (ITO) thin film is one of the materials widely on research not only in the academic fields but also in industrial fields because of their transparency, high conductivity and good adhesion characteristics on substrate. ITO thin films are usually preferred oriented to one of the (222), (400), and (440) planes during crystallization process, which is dependent on processing variables. The preferred orientation affects electrical, optical and etching properties of the films. In this study, thin films of preferred oriented in different orientation were fabricated by controlling processing variables. The crystallization behavior, grain size, surface roughness, transparency and electrical properties of the thin films in different orientation were examined.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1022-1025
• /
• 2003

본 연구에서는 저온 동시 합성법을 이용하여 ITO 나노 분말을 제조하였다. 저온 동시 합성법은 기존의 염화 인듐 및 염화 주석 염이 아닌 인듐 및 주석 유기물 염들을 사용하므로 기존의 $600{\sim}700^{\circ}C$가 아닌 $300^{\circ}C$ 이하에서 공정이 가능하고, 이로써 초미세급의 나노 분말을 얻을 수 있다. 또한 두가지 유기물 염을 동시에 산화시킴으로써 한번에 동시 합성이 가능하다. 이러한 저온 동시 합성법으로 제조한 나노 분말을 분석한 결과 분말의 크기는 평균 5 nm, 비 표면적은 약 $104m^2/g$ 이었다. 또한 EDS 및 XRD 분석 결과 분말의 결정상은 $In_2O_3$ 격자 내에 $3{\sim}8%$의 Sn이 고용된 [222], [400], [440]의 입방정 구조인 고품질의 ITO 나노 분말을 제조할 수 있었다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.142-147
• /
• 1998

핵연료피복관의 부식성능은 합금원소의 조성에 매우 민감하지만 열처리변수에 따라서도 크게 좌우되므로 열처리변수가 Zr 신합금의 부식저항성과 미세조직에 미치는 영향을 조사하였다. Zr-Nb-Sn-Fe-Cr 조성을 갖는 합금을 제조하여 열처리면수($\Sigma$A)를 7.7x$10^{-l9}$~5.3x$10^{-17}$ hr로 제어한 후 400 $^{\circ}C$/10.3 MPa 분위기의 autoclave를 이용하여 부식시험을 실시 하였다. 열처리변수($\Sigma$A)가 증가함에 따라서 부식저항성은 감소하였으며 열처리변수의 값이 7.7x$10^{-l9}$와 8.8x$10^{-l9}$ hr일 때 부식저항성은 매우 우수하였다. 천이후 부식속도에 미치는 열처리변수의 영향은 무게증가량에 미치는 영향과 동일한 경향을 나타냈으며 $\Sigma$A가 1.0x$10^{-18}$ hr이하에서 매우 낮은 부식속도를 보였다. 석출물 크기의 증가는 부식저항성을 감소시키는 것으로 관찰되었다. 따라서 우수한 부식저항성을 갖는 Zr 신합금을 개발하기 위해서는 중간 열처리 온도를 적절히 조절하여 석출물의 크기를 0.05 $\mu$m이하로 제어하여야 한다.다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.3
• /
• pp.228-233
• /
• 2007

Core technologies for integrating hydrogen gas sensor were investigated. In this study, the thermally isolated micro-hot-plate with areas of $100{\times}100-260{\times}260{\mu}m^2$ was fabricated by utilizing surface micromachining technique that provides better manufacturing yield than bulk micromachining counterpart. The optimum design of the sensor was peformed by analyzing the thermal profile of the structure obtained from a ANSYS simulator. The 400-nm-thick polysilicon films doped with phosphorus, the 300-nm-thick aluminum films, and the 200-nm-thick $SnO_2$(or ZnO)films were used as the micro-heater material, the temperature sensor material, and the gas sensitive material, respectively. The experimental results show that the developed gas sensors can detect $H_2$ concentration as low as 1 ppm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.554-557
• /
• 2001

Indium Tin Oxide(ITO) thin films have been fabricated by the dc magnetron sputtering technique with a target of a mixture $In_{2}O_{3}$(90mol%) and $SnO_{2}$(10mol%). We prepared ITO thin films with substrate temperature 200 to $400^{\circ}C$ and annealing temperature 200 to $500^{\circ}C$. Good polycrystalline-structured ITO films with a low electrical resistivity of $3.4{\times}10^{-4}\Omega{\cdot}cm$ have been obtained. The visible light transmittance of all obtained films was over 80 %.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.554-557
• /
• 2001

Indium Tin Oxide(ITO) thin films have been fabricated by the dc magnetron sputtering technique with a target of a mixture In$_2$O$_3$(90mo1%) and SnO$_2$(10mo1%). We prepared ITO thin films with substrate temperature 200 to 400$^{\circ}C$ and annealing temperature 200 to 500$^{\circ}C$ food polycrystalline-structured ITO films with a low electrical resistivity of 3.4${\times}$10$\^$-4/ Ω$.$cm have been obtained. The visible light transmittance of all obtained films was over 80 %.

• Journal of Korea Foundry Society
• /
• v.14 no.3
• /
• pp.240-247
• /
• 1994

TiC particulate reinforced magnesium matrix composites were fabricated by melt stirring method. The effect of alloying elements on TiC particulate dispersion into molten magnesium and mechanical properties were investigated. The incorporation time is defined as the time required for dispersion of solid particles into molten metal. The incorporation time of TiC particles into molten pure magnesium was remarkably shorter and the particulated dispersion was more uniform than that of pure aluminum which was reported previously. The incorporation time was, prolonged by the addition of Al, Bi, Ca, Ce, Pb, Sn or Zn. The tensile strength increased and elongation decreased by the addition of Cu or Sn into the matrices and composites. Although, the tensile strength of the matrices and composites increased by alloying with Ca or Ce, the maximum elongation was observed at a content of about 1% for the matrices. By alloying with Zn, the tensile strength increased for the matrices and composites, but the elongation of the matrices increased. The pure magnesium and its alloy matrix composites reinforced with 20vol% TiC have the tensile strength of about 400MPa. This value is compared with the tensile strength of SiC whisker reinforced magnesium matrix composites fabricated by liquid infiltration method at the same volume fraction. There fore, the melt strirring method which has the advantages of simple process is considered to be efficient in fabricating magnesium matrix composites.

• Analytical Science and Technology
• /
• v.26 no.6
• /
• pp.395-400
• /
• 2013

The hydration and antimicrobial peptide effects on the lipid alignment on the surface of a thin glass plate were investigated by using the solid-state nuclear magnetic resonance spectroscopy. Pure 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphotidylcholine (POPC) lipid molecules were well aligned on the surface of a thin glass plate without direct hydration by placing the sample for a few days in the desiccator containing a saturated sodium phosphate dibasic solution, which provided 95% relative humidity. But there was a big difference between two lipid phases, the one of which was hydrated by placing the sample for a few days in the desiccator with 95% relative humidity without direct hydration and the other was directly hydrated by dropping water and then placed for a few days in the same desiccator. The surface mobility of POPC molecules in a lipid bilayer phase was much activated by water. While the time for the POPC to align on the glass plate surface was short, the time for the PG-1/POPC mixture to reach the its equilibrium state was long.