• Journal of Magnetics
• /
• 제21권1호
• /
• pp.25-28
• /
• 2016

In the present study, bulk anisotropic nanocrystalline $SmCo_5$ magnets were prepared by hot deformation. The effect of deformation temperature on the texture and magnetic properties are presented, based on which the mechanism of plastic deformation and texture formation during the hot deformation process is discussed. Our analyses reveal that deformation temperature is one of the most important parameters that determine the texture of $SmCo_5$ grains. We suggest that diffusion creep plastic deformation occurs during hot deformation, which is very sensitive to the energy gain provided by an increase in temperature.

• 방사성폐기물학회지
• /
• 제11권1호
• /
• pp.1-9
• /
• 2013

파이로그린공정의 염폐기물처리과정에서 발생되는 주요 산화물 형태의 폐기물에는 희토류폐기물이 있으며 주요 구성 핵종은 Y, La, Ce, Pr, Nd, Sm, Eu, Gd 등 8종이다. 최종적인 희토류폐기물의 형태는 산화물 형태로 발생된다. 본 연구에서는 붕규산 유리계 내에서 희토류 산화물의 유리화 타당성을 평가 하기 위하여 6종의 유리조성을 개발하였다. 희토류 8핵종 혼합에 대한 solubility는 $1,200^{\circ}C$에서 25wt% 미만, $1,300^{\circ}C$에서 30wt% 미만 waste loading으로 온도 상승에 따라 증가하는 것으로 나타났으며 liquidus temperature는 균질한 유리가 형성된 20wt% waste loading에서 $950^{\circ}C$ 이하로 평가되었다. 희토류 산화물의 유리매질 내 solubility 이상에서는 희토류-oxide-silicate 결정이 생성된 유리세라믹을 이차상으로 형성하였으며 20~25wt% waste loading의 표면균질성이 양호한 유리는 용융온도 $1,200{\sim}1,300^{\circ}C$ 범위에서 점도 100 poise 이하, 전기전도도 1 S/cm 이상으로 유도가열식 저온용융로설비에서의 운전 용이성이 매우 양호한 것으로 평가되었다. 개발된 유리조성에 대한 기타 물리 화학적 특성 평가를 위한 실험들이 향후 수행될 예정이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.24-25
• /
• 2006

SmBCO coated conductors were successfully fabricated using EDDC (Evaporation using Drum in Dual Chambers) deposition system that is a bath type co-evaporation system for fabrication of superconducting tape and divided into two chambers named evaporation chamber and reaction chamber. To obtain long and high quality superconducting coated conductor, it is very important to secure the uniformity of all the deposition parameters m the deposition system such as deposition temperature, oxygen partial pressure, compositional ratios and so on. Therefore, we investigated the distribution of the parameters along the axis of the drum m EDDC on which tapes were wound helically. When the temperature on the middle point of deposition zone was $700^{\circ}C$, that on the edge of deposition zone was $675^{\circ}C$. When the thickness of SmBCO layer on the middle point of deposition zone was 1063 nm, that on the edge of deposition zone was 899 nm. The partial pressure of oxygen was 5 mTorr in the reaction chamber while that was $7{\times}10^{-5}$Torr in the evaporation chamber. The composition ratio of Sm:Ba:Cu, that was measured by EDX, was very uniform along the axis of the drum. Under these deposition conditions, critical current distribution along the drum axis was 175 A/cm, 190A/cm, 217.5 A/cm, 182.5 A/cm, 175 A/cm with the interval of 9 cm between samples. It means that the EDDC system has the potential of fabricating (100m, 200A) class coated conductor.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.158-163
• /
• 2000

Six different SiC ceramics with SiO2-Re2O3 (Re=Yb, Er, Y, Dy, Gd, Sm) as sintering additives have been fabricated by hot-pressing the SiC-Re2Si2O7 compositions at 1850$^{\circ}C$ for 2 hr under a pressure of 25 MPa. The room temperature strneth and the fracture toughness of the hot-pressed ceramics were characterized and compared with those of the ceramics sintered with YAG (Y3Al5O12). Five SiC ceramics (Re=Yb, Er, Y, Dy, Gd) investigated herein showed sintered densities higher than 94% of theoretical. Tthe SiC-Re2Si2O7 compositions showed lower strength and comparable toughness to those from SiC-YAG composition, owing to the chemical reaction between SiO2 and SiC during sintering. SiC ceramics fabricated from a SiC-Y2Si2O7 composition showed the best mechanical properties of 490 MPa and 4.8 MPa$.$m1/2 among the compositions investigated herein.

• 공업화학
• /
• 제25권3호
• /
• pp.318-323
• /
• 2014

랜덤 폴리프로필렌(random polypropylene, rPP)의 무수말레인산(maleic anhydride, MAH) 반응압출에 대한 MAH 함량 및 스티렌/MAH 몰비의 영향을 고찰하기 위해 이축압출기(twin screw extruder)를 이용하여 MAH가 그라프트된 rPP(MAH-g-rPP)를 제조하였다. MAH의 함량은 0.5, 1.0, 3.0, 5.0 phr이었고, 스티렌/MAH 몰비는 0, 1, 2로 하였으며, 개시제로는 dicumyl peroxide (DCP)가 사용되었다. MAH의 그라프트 정도는 FT-IR을 이용하여 $1700cm^{-1}$ 근처에서 나타나는 카르보닐기(C = O) 신축진동 피크의 존재 여부를 통해 확인하였으며, $3000cm^{-1}$ 근처의 C-H 신축진동을 기준으로 하여 정량한 결과 그라프트 반응이 MAH 함량이 3.0 phr까지 증가하는 경향을 보여주었고, 스티렌 몰비는 1.0일 때 최적을 나타내었다. MAH-g-rPP와 MAH-g-rPP가 5.0 phr 포함된 PP/MAH-g-rPP/pulp 복합체의 열적특성, 결정화 특성 등을 시차주사열용량분석기(DSC), 열중량분석기(TGA), X-선 회절분석(XRD), 편광현미경(POM) 등을 이용하여 관찰하였다. 비등온 결정화온도는 rPP-g-MAH가 첨가되었을 때 감소하는 경향을 나타내었고, PP/MAH-g-rPP/pulp 복합체의 인장특성과 인장시험 후 파단면의 SEM을 측정한 결과, MAH 함량 1.0 wt%, 스티렌/MAH 몰비 1.0일 때 상용화제로의 역할이 가장 우수한 것으로 나타났다. 복합체의 가공성 비교를 위해 복소 점도와 전단박하(shear thinning) 정도를 동적유변측정기를 이용하여 측정하였다. 상용화제를 가지는 복합체의 경우 낮은 멱수 법칙 지수(n)를 보여주었다.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.594-598
• /
• 2015

The effects of Ni on the mechanical properties of WC-Xwt.%Ni-1.5wt.%Si-1.1wt.%$B_4C$ composite (X = 21.6, 23.6, 25.6 and 27.6 wt.%) were investigated in order to replace Co with Ni as the binder metal for hard materials based on WC-Co system. Using X-ray diffraction, optical microscopy, field-emission scanning electron microscopy results, the microstructure, pore distribution and grain size of the composites sintered at $1,150^{\circ}C$ were examined with different fraction (X = 21.6, 23.6, 25.6 and 27.6 wt.%) of binder metal Ni. The average WC grain size of the $WC-Ni-Si-B_4C$ composites was about $1{\mu}m$. The Rockwell hardness : A (HRA) and transverse rupture strength were about 88HRA and $110kgf/mm^2$, respectively. The obtained sample was bonded with SM45C at a temperature of $1,050^{\circ}C$. The thickness and mechanical properties of the bonded area were investigated with different dwell time at a bonding temperature of $1,050^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.209-209
• /
• 2008

$BaTiO_3$는 대표적인 강유전체 재료로서 적층형 세라믹 콘덴서 (MLCC), PTC thermistor, resonator 등 다양한 분야에서 사용되고 있다. $BaTiO_3$ 기본조성으로 하는 PTC 써미스터는 온도가 올라감에 따라 저황이 높아지는 특성을 가지고 있으며, 이러한 PTCR 특성은 작동되는 큐리온도에 따라 그 적용이 달라진다. PTCR 소자는 소결온도, 소결분위기, 불순물, 첨가제 등의 제조공정상의 인자들과 기공률, 결정립 크기 등이 복합적으로 작용해 PTCR 특성에 영향을 미치기 때문에 제조하기에 무척 까다로운 소자로 알려져 있다. 하지만 우수한 특성을 지닌 PTCR 소자를 제조하기 위하여 새로운 조성개발이 이루어지고 있으며, 전기적 특성 개선, 재현성 확보, 제조원가 절감 등의 측면에서 새로운 공정개발이 이루어지고 있다. 본 연구에서는 Sm을 첨가한 $BaTiO_3$계 재료의 PTCR 특성에 미치는 Ti/Ba ratio 등의 변화에 따른 영향을 조사하고 공기 중과 환원분위기 중에서 소결된 시편의 차이점과 재산화 처리에 따른 PTC 특성에 미치는 영향을 R-T 측정으로 고찰하였다. 본 조성은 환원 분위기에서 소결할 경우 그 미세구조는 Ti/Ba ratio비가 높을 때 grain size가 커져 상온 비저항을 낮출 수 있었다. Sm 첨가로 상온 비저항값은 낮출 수 있었으나 공기 중에서 재산화 처리하더라도 jumping ratio$(R_{max}/R_{25^{\circ}C})$는 Ti/Ba ratio와 거의 무관한 것으로 분석되었다.

• KSBB Journal
• /
• 제32권2호
• /
• pp.124-132
• /
• 2017

A methane-oxidizing bacterium was isolated from rice paddy field soil around Jeollanam-do province, Korea, and characterized. The isolate was gram-negative, orange pigmented and short rod ($1.1-1.2{\times}1.6-1.9{\mu}m$). It was catalase and urease-negative but oxidase-positive. The strain utilized methane and methanol as sole carbon and energy sources. It had an ability to grow with an optimum pH 7.0 and an optimum growth temperature $30^{\circ}C$. The strain was resistant to antibiotic polymyxin B but sensitive to streptomycin, kanamycin, ampicillin, chloramphenicol and rifampicin. The isolate required copper for their growth with concentration range of $2-25{\mu}M$, with an optimum of $10{\mu}M$. Under optimal culture condition, specific cell growth rate and generation time were found to be $0.046hr^{-1}$ and 15.13 hr, respectively. Phylogenetic analysis based on 16S rDNA sequences indicated that the strain formed a tight phylogenetic lineage with Methylomonas koyamae with a value of 99.4% gene sequence homology. So, we named the isolate as Methylomonas sp. SM4. 8.6 mM methanol was accumulated in the reaction mixture containing 70 mM sodium formate and 40 mM $MgCl_2$ (MDH inhibitor) under atmosphere of methane:air (40:60) mixture for 24 hr at $30^{\circ}C$.

• 대한미생물학회지
• /
• 제22권3호
• /
• pp.295-300
• /
• 1987

Salmonella strains isolated from blood in the Dong-san hospital, Taegu during the period from 1971 to 1986 were studied for species distribution, drug resistance, and R plasmids. The number of strains was 2,527 and all of them were classified into S. typhi and S. paratyphi A. Approximately 300 strains were isolated in the period from 1974 to 1976 and 1978, 268 in 1982, and 204 in 1983, but the numbers isolated in the 1980's have a tendency to decrease as compared with those of the 1970's. S. typhi occupied 85% or more of strains isolated until 1976, but the isolation frequency decreased yearly with some variation, and S. paratyphi A increased gradually from 1974. Only 4 strains of S. paratyphi A were resistant to some drugs, and the resistance was not transferred to E. coli by conjugation. S. typhi resistant to drugs were 15 in 1971 through 1973, 24 in 1974, and 13 in 1975, but afterwards only few resistant strains were isolated. These strains were resistant to two or more drugs; chloramphenicol(Cm), tetracycline(Tc), streptomycin(Sm), sulfisomidine(Su), ampicillin(Ap), and kanamycin(Km) and no strain resistant to other drugs tested was found. Strains resistant to 3 or less drugs didn't transfer the resistance to E. coli by conjugation. There were 15 strains resistant to four or more drugs, and were isolated in years from 1972 to 1976. These strains transferred the resistance to E. coli, and the resistance was considered to be mediated by R plasmids. Transfer frequency was higher at $25^{\circ}C$ than at $37^{\circ}C$ and patterns of transferred resistance were Cm, Tc, Sm, Su; Ap, Km; Cm. R plasmids having markers of Cm, Tc, Sm and Su were classified into Inc H1.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권10호
• /
• pp.1308-1318
• /
• 2010

The purpose of this study was to evaluate the effect of replacing soybean meal with treated castor meal with (CMT) or without lime (CMNT) on the nutrient intake, performance, carcass characteristics, and yield of commercial cuts of beef cattle from a feedlot. Thirty male, castrated, crossbreed zebu cattle were used in the study, with an average initial weight of $360{\pm}30.27\;kg$. Five animals were used as a control group and were slaughtered at the beginning of the experiment; the remaining animals (n = 25) were distributed in random blocks (repetitions), with body weight as the criterion for block assignment. The animals were fed a diet containing 65% corn silage and 35% of concentrate on dry matter (DM) basis. Five diets consisted of four levels of soybean meal (SM) substituted with CMT (0, 33, 67 and 100%) on a DM basis and a diet with 100% of SM replaced with CMNT. At the end of the experiment, all animals were slaughtered, and their gastrointestinal tracts were emptied to determine their empty body weights (EBW). No significant effects were observed (p>0.05) for the substitution of soybean meal with CMT on intake of dietary nutrients, the average daily body weight gain (ADG) or EBW gain (EBWG). In spite of greater (p<0.05) ricin intake for the diet containing CMNT (3.06 mg/kg BW) compared to the CMT diet (0.10 mg/kg BW/d), there were no effects (p>0.05) on intake of dietary nutrients, ADG or EBWG. The average intake of DM and the ADG were 10,664.63 and 1,353.04 g/d, respectively. Regarding carcass characteristics, only carcass yield in relation to body weight was linearly reduced (p<0.05) upon substitution of SM by CMT. There was no effect (p>0.05) of the substitution of SM by CMT or CMNT on the yield of carcass basic cuts. CMT prices that are higher than 85% of the SM price do not economically justify the use of CMT. For CMT prices between 20 and 80% of the SM price, the optimal level was 67% substitution, while for prices below 15% of the SM price, the optimal level was 100% substitution with CMT. It can be concluded that treated castor meal with 6% lime can totally replace soybean meal in beef cattle diets.