• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.87-94
• /
• 2020

This study aims to evaluate the effectiveness of sterilization in Vietnam. We estimate a simultaneous equation by using Two-Stage least squares (2SLS) regression analysis. The time-series data was collected for the first quarter of 2004 to the fourth quarter of 2018. In particular, the effectiveness of sterilization is considered in terms of dollarized economy, since making the transition from a centrally planned to a market economy system, the Vietnamese economy has remained in a state of dollarization. In addition, we also assess whether the global financial crisis had an impact on the sterilization effectiveness of the State Bank of Vietnam (SBV). On the basis of the estimated sterilization and offset coefficients, our results suggest that the State Bank of Vietnam (SBV) has not been able to fully neutralize the impact on the domestic money supply when intervening in the foreign exchange market, and the capital inflows respond strongly to changes in domestic monetary conditions. The results also show that the global financial crisis has changed the effectiveness of these sterilization policies. An analysis of this study's empirical findings provides the opportunity to derive some recommendations that may assist in increasing the effectiveness of the State Bank of Vietnam's sterilization policies in the process of accumulating international reserves.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.71-82
• /
• 2009

As a solution to spectrum under-utilization problem, Cognitive radio (CR) introduces a dynamic spectrum access technology. In the area, one of the most important problems is how secondary users (SUs) should choose between the available channels, which means how to achieve load balancing between channels. We consider spectrum load balancing problem for CR system in frequency domain and especially in time domain. Our objective is to balance the load among the channels and balance the occupied time length of slots for a fixed channel dynamically in order to obtain a user-optimal solution. In frequency domain, we refer to Dynamic Noncooperative Scheme with Communication (DNCOOPC) used in distributed system and a distributed Dynamic Spectrum Load Balancing algorithm (DSLB) is formed based on DNCOOPC. In time domain, Spectrum Load Balancing method with QoS support is proposed based on Dynamic Feed Back theory and Hash Table (SLBDH). The performance of DSLB and SLBDH are evaluated. In frequency domain, DSLB is more efficient compared with existing Compare_And_Balance (CAB) algorithm and gets more throughput compared with Spectrum Load Balancing (SLB) algorithm. Also, DSLB is a fair scheme for all devices. In time domain, SLBDH is an efficient and precise solution compared with Spectrum Load Smoothing (SLS) method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.436-442
• /
• 2016

An electroencephalogram (EEG)-connectome processor to monitor and diagnose mental health is proposed. From 19-channel EEG signals, the proposed processor determines whether the mental state is healthy or unhealthy by extracting significant features from EEG signals and classifying them. Connectome approach is adopted for the best diagnosis accuracy, and synchronization likelihood (SL) is chosen as the connectome feature. Before computing SL, reconstruction optimizer (ReOpt) block compensates some parameters, resulting in improved accuracy. During SL calculation, a sparse matrix inscription (SMI) scheme is proposed to reduce the memory size to 1/24. From the calculated SL information, a small world feature extractor (SWFE) reduces the memory size to 1/29. Finally, using SLs or small word features, radial basis function (RBF) kernel-based support vector machine (SVM) diagnoses user's mental health condition. For RBF kernels, look-up-tables (LUTs) are used to replace the floating-point operations, decreasing the required operation by 54%. Consequently, The EEG-connectome processor improves the diagnosis accuracy from 89% to 95% in Alzheimer's disease case. The proposed processor occupies $3.8mm^2$ and consumes 1.71 mW with $0.18{\mu}m$ CMOS technology.

• Structural Engineering and Mechanics
• /
• v.15 no.4
• /
• pp.415-436
• /
• 2003

The combination of spatial latticed structures (hereafter SLS) and flexible cables, the cable-stayed spatial latticed structures (hereafter CSLS) can cross longer span. According to variation principle, a novel geometric nonlinear formulation for 3-D bar elements considering large displacement and infinitesimal rotation increments with second-order precision is developed. The cable nonlinearity is investigated and it is taken that the secant modulus method can be considered as an exact method for a cable member. The tower column with which the cables link is regarded as a special kind of beam element, and, a new simplified stiffness formulation is presented. The computational strategies for the nonlinear dynamic response of structures are given, and the ultimate load carrying capacities and seismic responses are analyzed numerically. It is noted that, compared with corresponding spatial latticed shells, the cable-stayed spatial latticed shells have more strength and more stiffness, and that the verical seismic responses of both CSLS and CLS are remarkably greater than the horizontal ones. In addition, the computation shows that the stiffness of tower column influences the performance of CSLS to a certain extent and the improvement of structural strength and stiffness of CSLS is relevant not only to cables but also to tower columns.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.89-95
• /
• 2016

Lately, the high-strength concrete is often used to increase the lifespan of bridges. The benefits of using the high-strength concrete are that it increases the durability and strength. On the contrary, it reduces the cross-section of the bridges. This study conducted structural performance tests of the bridge deck slabs applying high-strength concrete. As result of the tests, specimens of bridge deck slabs were destroyed through punching shear. Moreover, the tests exposed that the high-strength concrete bridge deck slabs satisfy the flexural strength and the punching shear strength at ultimate limit state(ULS). Also, limiting deflection of the concrete fulfilled serviceability limit state(SLS) criteria. These results indicated that the bridge deck slabs designed by high-strength concrete were enough to secure the safety factor despite of its low thickness.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.4
• /
• pp.115-125
• /
• 2014

Ground-Based Augmentation System (GBAS) is providing precision approach and landing service with aircraft around airport. FAA granted System Design Approval (SDA) of SLS-4000 to Honeywell as the first GBAS category I system on September 2009. Since then, according to their own kind of approval process including System Design Approval, Facility Approval and Operational Approval, USA, Germany, Spain and Australia have approved GBAS category I system which are installed in some airports in order to provide commercial GBAS service. Recently, KARI has also installed GBAS category I system into Gimpo international airport to establish operational technology of GBAS domestically and to validate effectiveness of GBAS system in Korea. This paper introduces overseas trends and activities regarding approval process of GBAS system and presents approval process and criteria appropriate for future commercial operation of GBAS in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.136-140
• /
• 2002

The investment casting process is used frequently to manufacture precise and complex shape metal parts. The previous wax pattern manufacturing process takes long time and high costs because the process is performed by hands. In order to improve the wax manufacturing process, a new process is developed to manufacture the wax pattern by using a rapid prototyping system. A CastForm pattern is made by a Selective laser Sintering type RP with CastForm powder. The CastForm pattern is dipped in the melted wax liquid, and the melted wax penetrates into the pores of the CastForm pattern. Wax pattern is obtained after cooling the CastForm pattern slowly. A stainless steel part has been manufactured by the suggested process. By obtaining the suggested process the manufacturing time and costs are reduced largely and the accuracy is improved.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.1
• /
• pp.79-90
• /
• 1998

One of the objectives of this study were to develop a process for manufacturing activated carbons from agricultural by-products(rice shells and saw dust) and another is to measure the iodine number, ash content and removal ratio of COD. The other is to compare those values with those of commercialized activated carbons. Agricultural by-products based activated carbons were manufactured through the steam-reaction method. A rotary kiln type furnace was used for both carbonization and activation. The optimum operating temperatures for carbonization and activation were $650^{\circ}C$ and $900^{\circ}C$, respectively. For the activated carbons produced under these conditions, the iodine number was 1,127mg/g. Especially, removal efficiency of COD was 61.5% for 40mg/L of wastewater and 30% for 150mg/L of SLS(Sodium Lauryl Sulfate).

• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.34-40
• /
• 2015

The design, procurement and fabrication of FPSO project ordered by Inpex Browse, Ltd. have been currently carried out by DSME(Daewoo Shipbuilding Marine and Engineering Co.). The unit will be installed and operated in the Ichthys field offshore of North-Western Australia and there are the particular design requirements to do with performance on the environment loads corresponding to max. 10,000 years return period wave. Also, the operational life of FPSO has to be over 40 years. With this background, this paper introduces the structural design procedure of crane pedestal foundation operated in north-western Australia offshore. The design of crane pedestal foundation structure is basically based on international design code (i.e. API Spec. 2C), Classification society's rule and project specifications. The design load cases are mainly divided into the crane normal operating conditions and crane stowed conditions according to environment conditions of the offshore with 1-year, 5-year, 10-year, 200-year and 10,000-year return period wave. This design experience for crane pedestal foundation operated in north-western Australia offshore will be useful to do engineering of other offshore crane structures.

• PNF and Movement
• /
• v.15 no.1
• /
• pp.41-50
• /
• 2017

Purpose: This study aimed to determine how inclined-treadmill walking training with rhythmic auditory stimulation affects balance and gait in stroke patients. Methods: Ten chronic stroke patients, admitted to B hospital in Gangwon-do between August and October 2015, were trained 5 times per week for 4 weeks; each session lasted 30 minutes. To assess balance and gait before and after the training, the timed up and go (TUG) test, Berg balance scale (BBS), six minute walking test (6MWT), and three-dimensional spatiotemporal gait ability were used to measure the relevant variables. The data were analyzed using the paired t-test, and the statistical significance level was 0.05. Results: There were significant differences in the TUG, BBS, 6MWT, gait speed, cadence, single limb support (SLS), and symmetric index (SI) before and after training (p < 0.05). Conclusion: The results showed that the inclined-treadmill walking training with rhythmic auditory stimulation was effective at improving the balance and walking ability of stroke patients. Hearing training, using one of the basic procedures of proprioceptive neuromuscular stimulation, is considered to be an important aspect.