• The Journal of Engineering Geology
• /
• v.12 no.3
• /
• pp.345-360
• /
• 2002

This study was for analysing the sedimentary rock slope stability and providing the reinforcement method that can heighten stability. The study area consists of Cretaceous basalt or basaltic tuff belonging to Hak-Bong Basalt Formation in Ha-Yang Group. Nature of geological structure confirmed in this area ars bedding, joint and fault. Majority of geological structure that affect most relationship rock slope stability is bedding. It is shown that dip direction is 120~160/15~25. In other structure, joint sets are shown that dip direction of set 1 is 310~330/65~85 and set 2 is 230~250/70~85. Joint set 3 shows above 85$^{\circ}$ high angle on NE trend although do not show clear. Stability analysis about rock slope used kinematic analysis, limit equilibrium method and FLAC by numerical analysis method. FLAC is continuum model that use Fintie Defferentce Method, but could use Interfaces Module and get discrete model's analysis effect such as UDEC.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.4
• /
• pp.387-400
• /
• 2013

In this study, the slope stability analysis and the landslide hazard assessment in tunnel portal slope were carried out. First, we selected highly vulnerable areas to slope failure using the slope stability analysis and analyzed the slope failure scale. According to analyses results, high vulnerable area to slope failure is located at 485~495 m above sea level. The slope is stable in a dry condition, while it becomes unstable in rainfall condition. The analysis results of slope failure scale show that the depth of slope failure is maximum 2.1 m and the length of slope failure is 18.6 m toward the dip direction of slope. Second, we developed a 3-D simulation program to analyze characteristics of runout behavior of debris flow. The developed program was applied to highly vulnerable areas to slope failure. The result of 3-D simulation shows that debris flow moves toward the central part of the valley with the movement direction of landslide from the upper part to the lower part of the slope. 3-D simulation shows that debris flow moves down to the bottom of mountain slope with a speed of 7.74 m/s and may make damage to the tunnel portal directly after 10 seconds from slope failure.

• Journal of Korean Society for Quality Management
• /
• v.14 no.1
• /
• pp.26-32
• /
• 1986

A class of multi-factor designs for estimating the slope of second order response surfaces is presented. For multi-factor designs the variance of the estimated slope at a point is a function of the direction of measurement of the slope and the design. If we average the variance over all possible directions, the averaged variance is only a function of the point and the design. By choice of design, it is possible to make this variance constant for all points equidistant from the design origin. This property is called "slope-rotatability over all directions", and the necessary and sufficient conditions for a design to have this property are given and proved. The class of design with this property is mainly discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.722-726
• /
• 2010

Inventory survey is process collecting data about cut slope. It's different from inspection. It contains not only basic information about cut slope, especially location, GPS positioning, height, length, weathering, joint direction, water conditions but also level of danger and damage. Collected data are being used get at status about cut slope along national roads. And It helps judging about priority of detailed investigation. According to results of analysis, we found better method about maintenance of cut slope. Later on, if inventory research is finished, we will understand characteristics of collapse slopes.

• Journal of Korean Society for Quality Management
• /
• v.23 no.2
• /
• pp.68-79
• /
• 1995

Good estimation of the slopes of the mixture response function may be important as well as estimation of mean mixture response. It is possible to evaluate and compare several mixture designs with respect to the slope. A graphical method is proposed that allows us to evaluate a given design's support for the fitted model in terms of slope variance. We can plot variances of slopes along Cox direction according to existence of restriction of simplex region when comparing several different mixture designs.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.60-64
• /
• 2010

The purpose of this study if to prevent dangerous accident of the overthrow of the tower crane in summer's hurricane. We develop the SMS in order to give automatic alarm system to operator within the dangerous range and to give a information of the exactly slope in the real time. The slope value of the tower crane is compose of direction, pitch by the front and rear, roll by the right and left and synthesis by the its pitch and roll. Especially, the synthesis eliminate the effect of the wall tie or wire bracing. So, this value should correctly indicate the actual slope. In this study, more applying field test should be applied with the SMS. In the future, a more measurement device can be applied to, and be able to feed more alarm criteria for the review of the risk in the field.

• Journal of the Korean Statistical Society
• /
• v.17 no.2
• /
• pp.121-133
• /
• 1988

In this paper a class of mixture designs for estimating the slope of second order Scheffe polynomial response surfaces for mixture experiments with q components is presented. The variance of the estimated directional slope at a point is a function of the direction of the slope and the design. If the variance is averaged over all possible directions in the (q-1)-dimensional simplex, the averaged variance is only a function of the point and the design. By choice of design, it is possible to make this variance constant for all points equidistant from the centroid point. This property is called "slope-rotatability over al directions in the simplex", and the necessary and sufficient conditions for mixture design to have this property are given and proved. The class of designs with this property is compared with other mixture designs and discussed.discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.854-861
• /
• 2005

Studied accuracy and practical use possibility of joint measurement that using 3D laser scanner to rock slope. Measured joint of Rock slope and comparison applied 3 dimension laser scanner and clinometer. 3D laser scanning system preserves on computer calculating to 3 dimension coordinate scaning laser to object. and according to laser measurement method of interior, produce correct vector value from charge-coupled device(CCD) or laser reciver and telegram register and time measuring equipment. Create of object x, y, z point coordinates to 3 dimension space of computer. Such 3 dimension point datum (Point Clouds) forms relocate position informations that exist to practical space to computer space. Practical numerical values related between each other. Compared joint distribution and direction that measured by laser scanner and clinometer. By the result, Distribution of joint projected almost equally. Could get more joint datas by measurement of 3 dimension scanner than measured by clinometer. Therefore, There is effect that objectification of rock slope investigation data, shortening of investigation periods, investigation reduction of cost. could know that it is very effective method in joint measuring.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.3
• /
• pp.1719-1723
• /
• 1969

In this country, farmers lay out furrows in the direction which is considered by their own judgement to be convenient for cultivation without paying much attention for soil erosion. The direction of furrow has considerable effects on soil and water losses. In this experiment, it is intedned to observe the differences of soil and water losses in different directions of furrows of sloped fields so that the results thus obtained could be informed to farmers who should be careful in determining furrow direction for soil erosion control. Some the major experimental results are summarized as follows: The direction of furrows did not affect so much on the runoffs in a gentle slope, as the runoff is 509 ton/10a in the contouring plot, $51^{\circ}$/ton/10a in the 45-degree plot, and 560 ton/10a in the up-and-down hill plot. The contouring plot among the three plots had best effect on soil conservation, as the soil losses are 5.8 ton/10a in the contouring plot, 9.3 ton/10a in the 45 degree plot, and 10.2 ton/10a in the up-and-down hill plot.

• Geomechanics and Engineering
• /
• v.33 no.2
• /
• pp.167-174
• /
• 2023

This study evaluated slope stability through a case study to determine the disaster risks associated with increased deforestation in structures, including schools and apartments, located in urban areas adjacent to slopes. The slope behind the ○○ High School in Gwangju, Korea, collapsed owing to heavy rain in August 2018. Historically, rainwater drained well around the slope during the rainy season. However, during the collapse, a large amount of seepage water flowed out of the slope surface and a shallow failure occurred along the saturated soil layer. To analyze the cause of the collapse, the images of the upper area of the slope, which could not be directly identified, were captured using unmanned aerial vehicles (UAVs). A digital elevation model of the slope was constructed through image analysis, making it possible to calculate the rainfall flow direction and the area, width, and length of logging areas. The change in the instability of the slope over time owing to rainfall lasting ten days before the collapse was analyzed through numerical analysis. Imaging techniques based on the UAV images were found to be effective in analyzing ground disaster risk maps in urban areas. Furthermore, the analysis was found to predict the failure before its actual occurrence.