• 지질공학
• /
• 제12권3호
• /
• pp.345-360
• /
• 2002

이 연구는 활동 가능성이 높은 퇴적암 사면에 대한 안정성을 분석하기 위해 수치해석을 수행하고, 안정성을 확보할 수 있는 보강공법을 제시하기 위한 목적으로 수행되었다. 연구지역은 백악기 하양층군의 학봉 현무암층에 해당하는 지역으로 대부분이 현무암질 응회암으로 구성되어 있으며, 지질 구조요소로는 크게 1차 구조 요소인 층리와 2차 구조요소인 절리 및 단층이 확인되었다 층리는 단사구조를 보이는데, 대부분의 경우 경사방향이 120~160/15~25(dip direction/dip)이고, 절리의 경우에는 크게 3개 조의 절리군이 확인되는데 세트 1은 310~330/65~85, 세트 2는 230~250/70~85이며, 세트 3은 뚜렷한 연장성을 보이지는 않지만 020의 경사방향에 85$^{\circ}$이상의 고각을 보이고 있다. 사면에 대한 안정성 해석은 운동학적 해석과 한계평형 해석을 수행한 후, 수치해석 방법으로 FLAC을 이용하였다. FLAC은 유한차분법을 이용하는 연속체 역학모델이지만, Interfaces Module을 이용하여 UDEC과 같은 불연속체 모델의 해석효과를 얻을 수 있었다.

• 한국터널지하공간학회 논문집
• /
• 제15권4호
• /
• pp.387-400
• /
• 2013

본 연구에서는 터널 갱구사면을 대상으로 사면안정성 및 산사태 위험도를 평가하였다. 먼저 사면안정성 해석을 통해 붕괴위험도가 가장 높은 구간을 선정하고 구체적인 붕괴규모를 파악하였다. 해석결과 해발고도 485~495 m인 구간은 강우시 안전율이 0.99로 불안정한 상태로 나타났다. 이 때 붕괴심도는 최대 2.1 m이며 붕괴 길이는 사면의 경사방향으로 18.6 m로 분석되었다. 해당구간에서 사면붕괴 시 파생되는 사태물질의 이동특성을 실시간으로 분석하고 터널 갱구부에 미치는 영향을 파악하고자 산사태 시뮬레이션 해석을 수행하였다. 해석결과 사태물질은 7.74 m/sec의 평균속도를 보이며 주로 계곡부를 따라 산 하부로 이동하는 것으로 분석되었다. 사태물질은 산 하부로 갈수록 점차 확산되며 10초 후에 터널 갱구부 위를 지나고 20.2초 후에 산하부에 도달하는 것으로 분석되었다. 특히 터널 갱구부는 사태물질 이동경로의 중심부에 위치하고 있어 산사태 발생 시 직접적인 피해를 받는 것으로 나타났다.

• 품질경영학회지
• /
• 제14권1호
• /
• pp.26-32
• /
• 1986

A class of multi-factor designs for estimating the slope of second order response surfaces is presented. For multi-factor designs the variance of the estimated slope at a point is a function of the direction of measurement of the slope and the design. If we average the variance over all possible directions, the averaged variance is only a function of the point and the design. By choice of design, it is possible to make this variance constant for all points equidistant from the design origin. This property is called "slope-rotatability over all directions", and the necessary and sufficient conditions for a design to have this property are given and proved. The class of design with this property is mainly discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.722-726
• /
• 2010

Inventory survey is process collecting data about cut slope. It's different from inspection. It contains not only basic information about cut slope, especially location, GPS positioning, height, length, weathering, joint direction, water conditions but also level of danger and damage. Collected data are being used get at status about cut slope along national roads. And It helps judging about priority of detailed investigation. According to results of analysis, we found better method about maintenance of cut slope. Later on, if inventory research is finished, we will understand characteristics of collapse slopes.

• 품질경영학회지
• /
• 제23권2호
• /
• pp.68-79
• /
• 1995

Good estimation of the slopes of the mixture response function may be important as well as estimation of mean mixture response. It is possible to evaluate and compare several mixture designs with respect to the slope. A graphical method is proposed that allows us to evaluate a given design's support for the fitted model in terms of slope variance. We can plot variances of slopes along Cox direction according to existence of restriction of simplex region when comparing several different mixture designs.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.60-64
• /
• 2010

The purpose of this study if to prevent dangerous accident of the overthrow of the tower crane in summer's hurricane. We develop the SMS in order to give automatic alarm system to operator within the dangerous range and to give a information of the exactly slope in the real time. The slope value of the tower crane is compose of direction, pitch by the front and rear, roll by the right and left and synthesis by the its pitch and roll. Especially, the synthesis eliminate the effect of the wall tie or wire bracing. So, this value should correctly indicate the actual slope. In this study, more applying field test should be applied with the SMS. In the future, a more measurement device can be applied to, and be able to feed more alarm criteria for the review of the risk in the field.

• Journal of the Korean Statistical Society
• /
• 제17권2호
• /
• pp.121-133
• /
• 1988

In this paper a class of mixture designs for estimating the slope of second order Scheffe polynomial response surfaces for mixture experiments with q components is presented. The variance of the estimated directional slope at a point is a function of the direction of the slope and the design. If the variance is averaged over all possible directions in the (q-1)-dimensional simplex, the averaged variance is only a function of the point and the design. By choice of design, it is possible to make this variance constant for all points equidistant from the centroid point. This property is called "slope-rotatability over al directions in the simplex", and the necessary and sufficient conditions for mixture design to have this property are given and proved. The class of designs with this property is compared with other mixture designs and discussed.discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.854-861
• /
• 2005

Studied accuracy and practical use possibility of joint measurement that using 3D laser scanner to rock slope. Measured joint of Rock slope and comparison applied 3 dimension laser scanner and clinometer. 3D laser scanning system preserves on computer calculating to 3 dimension coordinate scaning laser to object. and according to laser measurement method of interior, produce correct vector value from charge-coupled device(CCD) or laser reciver and telegram register and time measuring equipment. Create of object x, y, z point coordinates to 3 dimension space of computer. Such 3 dimension point datum (Point Clouds) forms relocate position informations that exist to practical space to computer space. Practical numerical values related between each other. Compared joint distribution and direction that measured by laser scanner and clinometer. By the result, Distribution of joint projected almost equally. Could get more joint datas by measurement of 3 dimension scanner than measured by clinometer. Therefore, There is effect that objectification of rock slope investigation data, shortening of investigation periods, investigation reduction of cost. could know that it is very effective method in joint measuring.

• 한국농공학회지
• /
• 제11권3호
• /
• pp.1719-1723
• /
• 1969

In this country, farmers lay out furrows in the direction which is considered by their own judgement to be convenient for cultivation without paying much attention for soil erosion. The direction of furrow has considerable effects on soil and water losses. In this experiment, it is intedned to observe the differences of soil and water losses in different directions of furrows of sloped fields so that the results thus obtained could be informed to farmers who should be careful in determining furrow direction for soil erosion control. Some the major experimental results are summarized as follows: The direction of furrows did not affect so much on the runoffs in a gentle slope, as the runoff is 509 ton/10a in the contouring plot, $51^{\circ}$/ton/10a in the 45-degree plot, and 560 ton/10a in the up-and-down hill plot. The contouring plot among the three plots had best effect on soil conservation, as the soil losses are 5.8 ton/10a in the contouring plot, 9.3 ton/10a in the 45 degree plot, and 10.2 ton/10a in the up-and-down hill plot.

• Geomechanics and Engineering
• /
• 제33권2호
• /
• pp.167-174
• /
• 2023

This study evaluated slope stability through a case study to determine the disaster risks associated with increased deforestation in structures, including schools and apartments, located in urban areas adjacent to slopes. The slope behind the ○○ High School in Gwangju, Korea, collapsed owing to heavy rain in August 2018. Historically, rainwater drained well around the slope during the rainy season. However, during the collapse, a large amount of seepage water flowed out of the slope surface and a shallow failure occurred along the saturated soil layer. To analyze the cause of the collapse, the images of the upper area of the slope, which could not be directly identified, were captured using unmanned aerial vehicles (UAVs). A digital elevation model of the slope was constructed through image analysis, making it possible to calculate the rainfall flow direction and the area, width, and length of logging areas. The change in the instability of the slope over time owing to rainfall lasting ten days before the collapse was analyzed through numerical analysis. Imaging techniques based on the UAV images were found to be effective in analyzing ground disaster risk maps in urban areas. Furthermore, the analysis was found to predict the failure before its actual occurrence.