• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.143-160
• /
• 2002

타이태늄은 뛰어난 생체적합성과 적절한 물리적 성질을 바탕으로 치과 및 정형외과 영역의 매식재로 널리사용되어져 왔으며, 골과 매식재 사이의 골 융합 정도를 증가시킬 목적으로 물리, 화학적인 방법을 이용한 타이태늄의 표면처리에 관한 많은 연구들이 진행되어 왔다. 최근에는 부착단백질 또는 성장인자를 이용한 생체재료의 표면개질을 통하여 조직적합성 및 치유 능의 개선을 위한 시도들이 있어왔다. Fibronectin(FN)은 주요 세포외기질중의 하나로 생체 내 널리 분포하여 세포의 부착, 이동 및 증식에 관여하는 거대 당단백으로, RGD및 PHSRN 펩타이드 서열이 세포의 인테그린과 결합하여 세포의 활성을 조절하는 것으로 알려져 있다. 이 연구에서는 FN으로 처리된 타이태늄이 조골세포의 부착, 증식 및 분화에 미치는 영향과 이에 따른 석회화 정도에 미치는 영향을 관찰하여 부착분자를 이용한 타이태늄 표면개질의 효과를 규명하고자 하였다. 상업용 순수 타이태늄을 gold thiol법을 이용하여 표면처리 후, 혈장 FN(plasma FN, pFN)과 유전자재조합법을 이용하여 얻은 FN조각(FN type III 7-10, FNIII 7-10)을 피복한 시편을 실험군으로, 아무런 처리를 하지 않은것(smooth surface, SS)과 산 부식(Sandblasted and acid etched, SLA)처리된것을 대조군으로 이용하였다. 배양된 조골세포주(MC3T3-E1)를 사용하여 타이태늄 표면 처리에 따른 세포의 증식, 형태변화, 알칼리성 인산분해효소(ALPase) 생산 및 세포면역형광법을 이용한 분화정도를 시간 경과에 따라 관찰하였다. 조골세포증식의 경우 FNIII 7-10 처리군에서 pFN 처리군 및 대조군에 비해 시간경과에 따라 유의성있는 세포수의 증식이 관찰되었으며(p<0.05), ALPase 생성의 경우에도 FNIII 7-10 처리 군에서 아무 처리도 하지 않은 군에 비해 유의성 있게 높은 효소의 생성이 관찰되었다(p<0.05). 주사전자현미경을 이용한 세포의 형태관찰결과 아무 처리도 하지 않은 군에서는 마름모형태를 나타내었으며, 산 부식 처리된 군에서는 세포가 가시모양의 형태를 보인 반면 FN으로 처리된 두 군에서는 세포의 부착 및 펴짐이 매우 발달되어 있는 모습이 관찰되었다. 세포의 분화정도를 관찰하기 위하여 국소부착키나제(focal adhesion kinase, FAK), 및 actin stress fiber의 분포양상을 세포면역형광법을 이용하여 관찰한 결과 FN으로 표면처리된 두 군에서 아무런 처리도 하지않은 군 및 산 부식처리 한 군에 비해 프라크의 발현이 높게 나타났으며 잘 발달된 actin stress fiber의 소견을 나타내었다. 이 실험의 결과들은 gold thiol 법을 이용한 표면처리 후 FN부착을 통한 타이태늄의 표면개질이 조골세포의 부착, 증식 및 분화에 중요한 역할을 담당하여 석회화 정도를 촉진시키는 것을 보여주었으며, 이런 결과들은 더 짧은 FN조각을 이용한 다른 생체재료의 표면개질에 폭 넓게 응용할 수 있으리라 생각된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.461-471
• /
• 2004

Recently, subscribers have strong desire to get QoS based personalized services in high-speed Internet access. Service providers have been rapidly replacing ADSL, cable broadband access networks with Metro-Ethernet based VDSL. But, it is difficult for Motto-Ethernet based broadband access networks to provide QoS based personalized services, because already deployed network elements cannot distinguish subscribers by specific traffic characteristics. In this paper, when the access network has tree topology, we show that it is possible to provide QoS for each downstream flow with only per flow traffic shaping at the edge node without QoS functions in access networks. In order to show that our suggested scheduling algorithm at the edge node can support the assured service in tree topology access networks, we evaluated its performance by simulation. The suggested scheduling algorithm can shape per-flow traffic based on the maximum bandwidth, and guarantees minimum bandwidth per flow by modifying the DRR scheduler. Simulation results show that congestion and loss in the access network elements are greatly reduced, TCP performance is highly enhanced and loss for assured CBR service flows is reduced by only shaping per-flow traffic at the edge node using our proposed scheduling algorithm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.209-216
• /
• 2008

Statement of problem: It is difficult about assessing the loosening tendency of conical connection type implant after cyclic loading with diamond like carbon coating one-piece abutments, and also about the retightening effect. Purpose: This study was performed to investigate the influence of one-piece abutment screw retightening after $5.0{\times}10^{4}$ cyclic loading and Diamond like coating Material and methods: Thirty two ITI implant were divided to 4 groups. Group 1,3-titanium abutment, group 2,4 - diamond like carbon coated abutment. Group 1,2 - $20.0{\times}10^{4}$ cyclic loading after $5.0{\times}10^{4}$ cyclic loading, Group 3,4- after $20.0{\times}10^{4}$ Cyclic loading. After cyclic loading, periotest values were taken and removal torque values of abutments were measured with a digital torque gauge. Results: 1. The removal torque of group 2 after $5.0{\times}10^{4}$ cyclic loading is slightly greater than the other groups but not significantly higher than others (P>0.05). 2. The final removal torque values after $20.0{\times}10^{4}$ cyclic loading of group 1 is bigger than group 3, and group 2 is bigger than group 4, but not significantly higher (P>0.05). 3. The final removal torque values after $20.0{\times}10^{4}$ cyclic loading of all groups are not significantly different (P>0.05).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.10.1-10.9
• /
• 2020

Background: The aim of this study was to evaluate the long-term clinical stability of implants with acid-etched surfaces sandblasted with alumina using retrospective analyses of the survival rate, success rate, primary and secondary stability, complications, and marginal bone loss of the implants. Methods: Patients who had implants placed (TS III SA, SS II SA, SS III SA, and U III SA) with SA surfaces from Osstem (Osstem Implant Co., Busan, Korea) at the Seoul National University Bundang Hospital, from January 2008 to December 2010 were selected for the study. Patients' medical records and radiographs (panorama, periapical view) were retrospectively analyzed to investigate sex, age, location of implantation, diameter, and length of the implants, initial and secondary stability, presence of bone grafting, types of bone grafting and membranes, early and delayed complications, marginal bone loss, and implant survival rate. Results: Ninety-six implants were placed in 45 patients. Five implants were removed during the follow-up period for a total survival rate of 94.8%. There were 14 cases of complications, including 6 cases of early complications and 8 cases of delayed complications. All five implants that failed to survive were included in the early complications. The survival of implants was significantly associated with the occurrence of complications and the absorption of bone greater than 1 mm within 1 year after prosthetic completion. In addition, the absorption of bone greater than 1 mm within 1 year after prosthetic completion was significantly associated with the occurrence of complications, primary stability, and implant placement method. Five cases that failed to survive were all included in the early complications criteria such as infection, failure of initial osseointegration, and early exposure of the fixture. Conclusions: Of the 96 cases, 5 implants failed resulting in a 94.8% survival rate. The failed implants were all cases of early complications such as infection, failure of initial osseointegration, and early exposure of the fixtures. Periimplantitis was mostly addressed through conservative and/or surgical treatment and resulted in very low prosthetic complications. Therefore, if preventive measures are taken to minimize initial complications, the results can be very stable.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.2
• /
• pp.1-17
• /
• 1977

Nitrogen responses to yield and other agronomic characters were studied using four rice varieties, Tongil, Jinheung, Milyang 23, and Yushin, at six nitrogen levels, 0, 10, 15, 20, 25 and 30kg/10a, in a silt loam soil at the Crop Experiment Station, Suweon, Korea, in 1976. Grain yields of Milyang 23 and Tongil were much higher than those of Jinheung and Yushin at high nitrogen levels (15-30kg/10a). Optimum nitrogen levels of the rice varieties, Tongil, Milyng 23, Yushin, and Jinheung, estimated by intersecting straight line, were 22, 19, 19, and 12kg/10a, respectively. Morpshological characters, dry matter production before and after heading, and yield components were dicussed in relation to the nitrogen responsivenees of the rice varieties. In addition, relationships between yield, yield components, and other agronomic characters were discussed to obtain some informations for higher rice yield.

• The Korean Journal of Ecology
• /
• v.13 no.3
• /
• pp.225-236
• /
• 1990

We studied that seeds of wild radish with different size of weight can be obtained for the purpose of differentiation and growth of these seeds by total growth periods. This study is practised a view of plant eco-physiological side and dry-matter production. Through whole growth periods, we knowthat seed weight of L plots was higher than that of M and S plots. In the 33th day after day after germination, growth values of L, M and S plots were 13.93, 7.77, and 4.61 g/plant, respectively. Growth of shoot (cotyledon and leaf) area and shoot weight were shown the similar trends with individual plant dry-amtter weight. In the 33th day after germination, shoot area of L, M and S plots were 21.55, 11.81 and 8.75 $cm^3$/plant and shoot dry weight of L, M and S plots were 10.83, 6.03, 3.50 g/plant, respectively. In the early stage of growth (the 10-14th day after germination), the values of RGR of seed weight of L, M, S plots were 0.2887, 0.2807 and 0.2365 g/g/day, in the late stage of growth, those values of RGR of L, M, S plote were 0.2721, 0.1716, 0.1727 g/g/day, respectively. In the early stage of growth (the 14th day after germination), the values of NAR or L, M and S plots were 0.1513, 0.1373, and 0.1094 g/$cm^2$/day, respectively. It is thought that seed weights were influenced seriously effect in the early stage of growth. The NAR value, in the late stage of growth (the-28-33th day after germination), of L, M and S plots were not large different as 0.1086, 0.1097 and 0.112 g/$cm^2$/day, respectively. The LAR values of M and S (2.0396, 2.1520 $m^2$/g) plots, in the early stage of growth, were higher than L (1.9037 $m^2$/g) plots. In the late stage of growth, the value of LAR of L plots were nearly same as M plots, but the value of S plots were higher than that of L and M plots (0.0458 $m^2$/g). And, in the early stage of growth, the values of SLA of L, M and S plots were 2.2123, 2.2107 and 2.8448 $m^2$/g, respectively. We measured the photosynthetic rates and the respiratory rates as the physiological characteristics of wild radish. In the early stage of growth, the photosynthetic rates of L, M and S plots were 12.4, 14.4, 9.8 $\mu$mol /$m^2$/sec and 9.4, 11.4, 9.8 $\mu$mol/$m^2$ /sec in the late stage of growth, respectively. In this result, it could be informed that photosynthetic rates in the late stage of growth were lower than the early stage. In the middle stage of growth, the respiratory rates were 0.793, $\mu$mol/$m^2$/min in shoot, and 3.28 $\mu$mol/$m^2$/min in root without relation to seed weight. The growth analysis of plants was used by Hunt & Parson s computer program (1974, 1981) and its results used this program were good. Therefore, in this sense, it could be expected that the computer program used and developed largely in researches of plant growth.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.229-255
• /
• 2005

The Korea Development Bank promoted a total outsourcing for IT operation in 1999 for the first time in the banking industry. The Korea Development Bank became the center of public attention because the most banks were unwilling to take an outsourcing with external sources for the reason of financial operation accidents, securities, and threats of strikes. After the introduction of the total IT outsourcing, the Korea Development Bank has continuously diagnosed the problems of the IT outsourcing and adopted various proper complements for the enhancement of the IT outsourcing. As the result of the enhancement, the IT outsourcing of the Korea Development Bank marched into the joint liability operation period after going through the outsourcing operation period and the co-operation period. The joint liability operation which is the most leading outsourcing system which is adopted by the Korea Development Bank for the first time in the banking industry. Through the joint liability operation, the Korea Development Bank could accept the most up-to-date IT, concentrate internal manpower on the core capability, and secure flexibility of manpower. Also, the bank changed the relationship between the bank and the external sources from the one-sided relationship between a producers and a consumer to the joint liability relationship on which both sides are responsible for the operation, and could integrate the internal capacity with the professional know-how of the external IT outsourcing company. In this paper, we testified the soundness and validity for the worries of banks about the total IT outsourcing with external sources. And, we arranged the advantages and outcomes of the total IT outsourcing with external sources compared to the IT outsourcing with internal sources. Moreover, we expect that we can improve the closed financial IT outsourcing industry structure and raise the world competitive power of domestic IT outsourcing companies by correcting wrong ideas on the IT outsourcing with external sources.

• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.493-500
• /
• 1998

To investigate the effects of light intensity on the growth, and the critical minimum light intensity for growing of Cornus controversa seedlings at the stage of cotyledon, hypocotyl elongation, cotyledon expansion, the times of leaves appearance, dry weights of each organ, and specific leaf area(SLA) were measured on a growth chamber with several light intensity gradients(385, 32, 17, 8, and $5{\mu}mol\;m^{-2}s^{-1}$). There was a positive correlationship between the size of cotyledon and the biomass of cotyledon and total seedling. Hypocotyl was more elongated under relatively low light intensities, such as 32, 17, 8, and $5{\mu}mol\;m^{-2}s^{-1}$ than under $385{\mu}mol\;m^{-2}s^{-1}$ light intensity, however, dry weight of the hypocotyl was adverse. As the light intensities decreased, the leaf appearance was delayed and the number of leaves decresed. In addition, leaves did not appear under $8{\mu}mol\;m^{-2}s^{-1}$ and $5{\mu}mol\;m^{-2}s^{-1}$ light intensity. Although cotyledons were more fully expanded under 32 and $17{\mu}mol\;m^{-2}s^{-1}$ light intensities than $385{\mu}mol\;m^{-2}s^{-1}$ light intensity, the dry weights of cotyledons were greater under the high light intensity. The dry weight of cotyledon, hypocotyl, root and leaves showed a decreased pattern with decreasing light intensities, but root to shoot(hypocotyl+leaves) ratio rapidly increased. Roots did not develop below $8{\mu}mol\;m^{-2}s^{-1}$ light intensity. In conclusion, the results showed that the critical minimum light intensity for growing of Cornus controversa seedlings was above $17{\mu}mol\;m^{-2}s^{-1}$ light intensity.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.1
• /
• pp.1-15
• /
• 2016

Annual litterfall production and leaf area index (LAI, $m^2/m^2$) were estimated using litter traps in Gwangneung, Mt. Taewha and Mt. Gariwang. Annual total litter fall production including branch, bark, others was the highest in Gwangneung($7497.3{\pm}326.5kg/ha/yr$), which had the highest basal area at late successional stage, and followed by Mt. Taewha($5929.1{\pm}225.8kg/ha/yr$) and Mt. Gariwang($3,210.1{\pm}220.1kg/ha/yr$). Mt. Gariwang had the lowest litterfall production due to high elevation and short growing season even with the higher stand density and basal area than Mt. Taewha. Similarly, LAI, which was calculated by multiplying the mass of leaf litter with specific leaf area, was the highest in Gwangneung($5.99{\pm}0.69$) and followed by Mt. Taewha($5.20{\pm}0.24$) and Mt. Gariwang($4.06{\pm}0.42$) and the upper canopy species had the highest leaf area index in every sites (Gwangneung : 4.72, Mt. Taewha : 3.08, Mt. Gariwang : 2.19). However, species specific LAI estimation based on the relationship between basal area and leaf area was limited due to upper canopy species non-proportionality of basal area with LAI. In addition, the comparison between direct and indirect LAI measurement showed the importance of canopy clumping, especially at high density. Our study emphasized the necessity of direct LAI measurement using litter fall traps especially at temperate deciduous forest with diverse species.

• Asia pacific journal of information systems
• /
• v.23 no.2
• /
• pp.21-39
• /
• 2013

As the utilization of information technology and the turbulence of technological change increase in organizations, the adoption of IT outsourcing also grows to manage IT resource more effectively and efficiently. In this new way of IT management technique, service level management(SLM) process becomes critical to derive success from the outsourcing in the view of end users in organization. Even though much of the research on service level management or agreement have been done during last decades, the performance of the service level management process have not been evaluated in terms of final objectives of the management efforts or success from the view of end-users. This study explores the relationship between SLM maturity and IT outsourcing success from the users' point of view by a analytical case study in four client organizations under an IT outsourcing vendor, which is a member company of a major Korean conglomerate. For setting up a model for the analysis, previous researches on service level management process maturity and information systems success are reviewed. In particular, information systems success from users' point of view are reviewed based the DeLone and McLean's study, which is argued and accepted as a comprehensively tested model of information systems success currently. The model proposed in this study argues that SLM process maturity influences information systems success, which is evaluated in terms of information quality, systems quality, service quality, and net effect proposed by DeLone and McLean. SLM process maturity can be measured in planning process, implementation process and operation and evaluation process. Instruments for measuring the factors in the proposed constructs of information systems success and SL management process maturity were collected from previous researches and evaluated for securing reliability and validity, utilizing appropriate statistical methods and pilot tests before exploring the case study. Four cases from four different companies under one vendor company were utilized for the analysis. All of the cases had been contracted in SLA(Service Level Agreement) and had implemented ITIL(IT Infrastructure Library), Six Sigma and BSC(Balanced Scored Card) methods since last several years, which means that all the client organizations pursued concerted efforts to acquire quality services from IT outsourcing from the organization and users' point of view. For comparing the differences among the four organizations in IT out-sourcing sucess, T-test and non-parametric analysis have been applied on the data set collected from the organization using survey instruments. The process maturities of planning and implementation phases of SLM are found not to influence on any dimensions of information systems success from users' point of view. It was found that the SLM maturity in the phase of operations and evaluation could influence systems quality only from users' view. This result seems to be quite against the arguments in IT outsourcing practices in the fields, which emphasize usually the importance of planning and implementation processes upfront in IT outsourcing projects. According to after-the-fact observation by an expert in an organization participating in the study, their needs and motivations for outsourcing contracts had been quite familiar already to the vendors as long-term partners under a same conglomerate, so that the maturity in the phases of planning and implementation seems not to be differentiating factors for the success of IT outsourcing. This study will be the foundation for the future research in the area of IT outsourcing management and success, in particular in the service level management. And also, it could guide managers in practice in IT outsourcing management to focus on service level management process in operation and evaluation stage especially for long-term outsourcing contracts under very unique context like Korean IT outsourcing projects. This study has some limitations in generalization because the sample size is small and the context itself is confined in an unique environment. For future exploration, survey based research could be designed and implemented.