• 공업화학
• /
• 제9권6호
• /
• pp.852-856
• /
• 1998

유동층 연소로에서 압력 요동의 통계적 처리 방법을 이용하여 충전물질의 유동층 거동에 대한 영향을 분석하였다. 실험은 내경이 6.7cm인 유동화 장치에서 수행하였고, 실험변수는 입자크기 및 분포, 유동화가스, 유동층의 aspect ratio(L/D), 충전물 등이다. 충전물질은 스크린 충전물질을 사용하였고, 압력 요동 특성은 차압 전달기로 측정하였다. 측정 압력 요동 특성치는 평균값과 표준편차, power spectral밀도 합수의 주진동수 등이다. 압력요동의 표준 편차는 압력 측정 tap의 반경 방향에 거의 영향을 받지 않았으며, 압력 측정 tap의 축방향에서는 충전물이 없는 경우 가스분산판 약 4.5cm 이상에서는 거의 일정하다. 충전물의 크기가 증가할수록 주진동수는 감소하는 경향이 나타났으며, 충전물의 양이 10% 부근에서 주진동수가 가장 큰 변화값을 나타내었다. 압력 요동의 표준 편차는 유동층 연소로의 거동을 해석하고 유동화 현상을 설명하는데 효과적이며, 압력 요동의 특성들은 충전물질에 많은 영향을 받았다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.842-853
• /
• 2008

In the construction of dam, the key factor which decides the type of dam is security of materials resource. Because of the large scale earth work, the ability to supply the materials is essential part about economical efficiency. The research is the case study about controlling the plan to secure the material resources in the design of Buhang multipurpose dam. In case of Buhang multipurpose dam, at that time of basic design, it was planned to use a rock fill material. From the detail investigation about the river bed accumulative layer widely spread on the submerged district on the basic design, the research is accomplished to replace rock material with gravel material. After the investigation of whole reserves of gravel material, estimation of conformity as dam construction material from analysis of grain size distribution, the case study of oversea construction, and the material property comparison between rock fill material and gravel fill material, it is verified th possibility of using the gravel fill. Thereafter, the analysis of dam stability using a gravel fill material is accomplished. Finally, A gravel fill material can be used as the main construction material of CFRD, therefore the efficiency of resource recycling in the submerged area is maximized, and the established plan is more advantageous to stability, constructibility, environmentibility than the case of using a rock fill.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.640-647
• /
• 2023

Material corrosion in nuclear power plant (NPP) is not controlled only by amine injection but also by ion exchange (IX) which is the best option to remove trace Na⁺. This study was conducted to understand the Na⁺ leakage characteristics of IX beds packed with ethanolamine-form (ETAH-form) and hydrogen-form (H-form) resins in the simulated water-steam cycle in terms of intrinsic behaviors of four kinds of cation-exchange resins through ASTM test and Vanselow mass action modeling. Na⁺ was inappreciably escaped throughout the channel created in resin layer. Na⁺ leakage from IX bed was non-linearly raised because of its decreasing selectivity with increasing Na⁺ capture and with increasing the fraction of ETAH-form resin. Na⁺ did not reach the breakthrough earlier than ETAH⁺ and NH₄⁺ due to the increased selectivity of Na⁺ to the cation-exchange resin (H⁺ < ETAH⁺ < NH₄⁺ ≪ Na⁺) at the feed composition. Na⁺ leakage from the resin bed filled with small particles was decreased due to the enhanced dynamic IX processes, regardless of its low selectivity. Thus, the particle size is a predominant factor among intrinsic properties of IX resin to reduce Na⁺ leakage from the condensate polishing plant (CPP) in NPPs.

• Korean Chemical Engineering Research
• /
• 제55권5호
• /
• pp.698-703
• /
• 2017

Bubble flow characteristics in fluidized beds were analyzed by CPFD simulation. A fluidized bed, which had the size of $0.3m-ID{\times}2.4m-high$, was modeled by commercial CPFD $Barracuda^{(R)}$. Properties of bed material were $d_p=150{\mu}m$, ${\rho}_p=2,330kg/m^3$, and $U_{mf}=0.02m/s$. Gas was uniformly distributed and the range of superficial gas velocity was 0.07 to 0.16 m/s. Two other geometries were modeled. The first was a three-dimensional model, and the other was a two-dimensional model of $0.01m{\times}0.3m{\times}2.4m$. Bubble size and rising velocity were simulated by axial and radial position according to superficial gas velocity. In the case of three-dimensional model, simulated bubble rising velocity was different from correlations, because there was zigzag motion in bubble flow, and bubble detection was duplicated. To exclude zigzag motion of bubble flow, bubble rising velocity was simulated in the two-dimensional model and compared to the result from three-dimensional model.

• 한국정밀공학회지
• /
• 제32권9호
• /
• pp.765-771
• /
• 2015

In an Additive Manufacturing (AM) system emplying the Powder Bed Fusion (PBF) system, polyamide-12 powder is currently recognized as the general material used. The Polyamide-12 powder's properties include an average particle size of 58 $58{\mu}m$, a density of 0.59 g/cm3, and melting point of $184^{\circ}C$, and can also be to used coat materials for metal powder. For this reason, the sintering process is similar to the polymer powder and polymer coated metal powder process, except during the post-process. The polyamide-12 powder has some disadvantages such as its high cost and the fact that it can only be used for the provided equipment from the maker. Therefore, this study aims to perform the applicability of new material, polymer and polymer coated metal, to the PBF system.

• 한국수자원학회논문집
• /
• 제54권8호
• /
• pp.607-616
• /
• 2021

본 연구는 가는 모래로 이루어진 하상으로부터 침식된 부유사의 농도분포 계산결과에 차폐효과가 미치는 영향을 살펴보는 것을 목적으로 수행되었다. 하상재료의 입도분포를 고려하여 침식율을 산정할 수 있는 유사이동 모형을 개발하였으며, 측정자료와의 비교를 통해 수치모형의 적용가능성을 검토하였다. 수치모의결과로부터 하상재료 입도분포의 기하표준편차가 1.5보다 작은 경우 차폐효과가 부유사 농도의 연직방향 분포 계산결과에 미치는 영향은 매우 작은 것으로 나타났다. 또한 기하표준편차가 1.5이하인 가는 모래로 이루어진 하상으로부터 침식된 유사 농도를 계산하는 경우, 균일사로 가정 후 대표입경을 바탕으로 농도를 산정하여도 합리적인 결과가 얻어지는 것으로 확인되었다.

• 대한토목학회논문집
• /
• 제29권1B호
• /
• pp.63-71
• /
• 2009

교각 세굴 방지를 위해 사석보호공을 설치하는 경우 하상의 유사이탈로 인한 보호공의 침하현상이 발생할 수 있으며 따라서 사석층과 하상 사이에 필터층의 설치가 반드시 필요하다. 하지만 국내의 명확하지 않은 필터설치 기준과 설치를 위한 기술적 어려움 그리고 고가의 공사비와 같은 문제점으로 인해 현장에서는 필터 없는 사석보호공을 주로 시공하고 있다. 이에 본 연구는 다양한 조건의 사석 포설두께, 접근 유속, 사석과 하상토의 입경을 갖는 수리실험을 통해 필터층이 없는 사석보호공의 침하량을 정량적으로 측정 및 분석하였으며 실험 결과, 접근유속이 증가할수록, 하상토의 입경이나 포설두께가 감소 할수록 최대침하량은 증가하는 양상을 보였고 일정 시간 후에는 침하량이 최대값에 도달하여 유사이탈이 더 이상 발생하지 않음을 알 수 있었다. 또한 본 논문에서 수행된 실험결과 자료들을 최종적으로 종합하여 하상토 입경 계수가 포함된 필터층 없는 사석보호공의 무차원 침하량 산정식을 제안하였으며 이러한 연구 결과들은 추후 필터층 없이 시공되는 사석 보호공의 침하 안정성 평가를 위한 지표로 활용될 수 있을 것이다.

• 한국식품저장유통학회지
• /
• 제14권4호
• /
• pp.364-368
• /
• 2007

가공이나 저장 중 쉽게 산화되는 특성을 갖는 비타민 C의 안정성과 가공적성을 향상시키고자 Zein-DP와 HPMC-FCC를 코팅제로 한 유동층 코팅법을 이용하여 코팅한 비타민 C 분말의 품질 특성에 대하여 조사하였다. 유동층 코팅은 비타민 C의 입자크기($80{\sim}100\;mesh,\;100{\sim}140\;mesh$)와 코팅액의 혼합비(1:1.6, 1:2.5, 1:3(w/w))를 달리하여 실시하였다. 코팅효율은 $80{\sim}100\;mesh$의 경우가 $100{\sim}140\;mesh$보다 높았고 코팅액의 혼합량이 많을수록 감소함을 보였다. 코팅된 필름의 두께는 $80{\sim}100\;mesh$의 경우가 $100{\sim}140\;mesh$보다 두꺼웠으며, 코팅된 입자의 입도분포도는 코팅액 혼합비 1:3에서 가장 좁았다. 코팅분말의 DPPH 소거능은 코팅 전 입자크기와 코팅액 혼합비에 따른 큰 차이를 보이지 않았다. 상기의 코팅된 분말의 품질 특성에 코팅물질의 종류는 거의 영향을 미치지 않았다. 이로써 비타민 C의 유동층 코팅에 적합한 조건으로 비타민 C의 입자크기는 $80{\sim}100\;mesh$, 비타민 C와 코팅 액의 혼합비는 1:3(w/w)으로 판단된다.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.142-147
• /
• 1998

Rotary bending fatigue tests were carried out on the nitrided titanium in order to investigate the effect of nitriding layer on fatigue limit. Main results obtained are as follows. (1) The fatigue limit of nitrided pure titanium is remarkably reduced because of enlargement of grain size at high heat treating temperature and high stress field created from the elastic interaction in the compound layer. (2) Further test using specimen which was removed nitrified layer gradually, were also conducted and it was found that by removing the compound layer the fatigue limit recovered as the level of basic material and rather increased by coming of a diffusion layer. Therefore it is concluded that the surface compound layer generated by nitriding treatment reduced the fatigue limit but diffusion layer increased it.

• Journal of Biosystems Engineering
• /
• 제11권2호
• /
• pp.55-65
• /
• 1986

The resistance to the passage of airflow through various agricultural products is an important consideration in the design of an aeration or drying system. The amount of resistance to airflow varied widely from one kind of grain to another, and depended upon airflow rate, surface texture and shape of the particles, the size and configuration of voids, and foreign and fine material in the grain bed. The airflow rate was the major factor considered on this kind of study in the early stages. But these days, the studies on the resistance to airflow of grain affected by grain moisture content and foreign and fine material have been widely carried out. However the foreign an fine material in the grain bed could not be a major factor on the study in Korea because there were only a few grain process procedure after harvesting it. The objectives of this study were to investigate the effect of moisture content and airflow rate on airflow resistance to grain, and to develop a model to predict the static pressure drop across the grain bed as a function of moisture content and airflow rate. The rough rice varieties, Akibare, Milyang 15 (Japonica types), Samkwang, Backyang (Indica types)and covered barley variety, Olbori, which were harvested in 1985 were used in the experiment after cleaning them. Resistances to airflow of grain were investigated at four levels of moisture content (13-25%, wb.) for ten different airflow rates($0.01-0.15m^3/sm^2$). The results of this study are summarized as follows; 1. Theaverage bulk densities were $585.3kg/m^3$ for rough rice and $691.6kg/m^3$ for barley at the loose fill, and were $648.8kg/m^3$ for rough rice and $758.2kg/m^3$ for barley at the packed fill. The pressure drops at the packed fill beds were approximately 1.4 to 1.8 times higher than those at the loose fill beds. 2. The pressure drops across grain beds deceased with the increase of moisture content and increased with airflow rate. The decreasing rates of pressure drop across grain beds according to the moisture contents at the lower airflow rates were higher than those at the higher airflow rates, and the increasing rates of pressure drop according to the airflow rates at the lower moisture contents were higher those at higher moisture contents. 3. The pressure drop across barley bed were much higher than rough rice beds and the pressure drops across Japonica type rough rice beds were a little higher than Indica type. 4. The mathematical models to predict the pressure drop across grain beds as a function of moisture content and airflow rate were developed from these experiments.