• The Korean Journal of Quaternary Research
• /
• v.18 no.2 s.23
• /
• pp.67-73
• /
• 2004

Dissected erosional surfaces are widely distributed in the western part of Korea (e.g. Icheon, Chungju, Jecheon, Seosan). The deposits with thickness of less than 2m occur on the smooth bedrock surface are composed of poorly sorted subangular gravels with less than 20cm diameter. However, only weathered mantle of granites without the gravel layer are observed at some outcrops. The results of grain size analysis of deposits of Icheon district revealed that the characteristic of the gain size distribution is very similar with the results of sheetflood deposits presented by Blair (1999) in the Death Valley. Loess layer with buried soil layers of MIS7 covers the sheetflood deposits. The loess layer implies that the sheetflood deposits occurred before MIS7 based on the typical Loess sequences presented by Naruse et al.(2003). On the other hand, the climate of Korean Peninsula in MIS2 was very dry and cold (Yoon and Hwnag, 2003) by pollen analysis. This is because Yellow Sea was completely emerged during the MIS2(e.g. Sau\ito, 1998). So, it is thought that the climate in Korean Peninsula of not only MIS2 but also other glacial ages such as MIS8 was similar with present Mongolian climates. Tanaka et al.(2005) pointed out that Hortonian overlandflow occurs in grass vegetated granite basin in Mongolia. Therefore, dissected piedmont gentle slopes in the western Korea were possibly formed by sheetflood erosion during probably MIS8 as pediment widely distributed in Mongolia.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.1-6
• /
• 2004

This paper shows the study on the design and another applications of the spray-freeze dryer for the production of valuable material powders. Powder production and handling has been an integral part of material extracting processing and pharmaceutical processing because of the wide use of oral dosage forms. There are a few commonly used powder preparation methods including mechanical milling, precipitaion, spray drying, freeze drying, and so on. In general, methods available for preparing inhalation powders are limited due to certain inhalation powder's sensitive nature to the processing environments. This is particularly true for preparing dry powder aerosols where the aerodynamic particle size($<5{\mu}m$) and the size distribution are pivotal. Supercritical fluid antisolvent and spray freeze drying have recently emerged as promising techniques for producing powders for use in microcapsulation. However, the aerosol applications of these powders are yet to be explored. The purpose of this study is to test the feasibility of using spray freeze-dried valuable material powders for aerosolization.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.1
• /
• pp.57-71
• /
• 2004

The objective of this study was to provide a better understanding of SUPAC-IR and its application in handling postapproval changes to immediate release solid oral dosage forms. Originally, SUPAC-IR was aimed at reducing the regulator burdern of the industry when they were making postapproval changes, but still at maintaining the formulation quality and performance of a drug product. The postapproval changes that were covered under SUPAC-IR included variations in the components ad composition of formulation, the site of manufacturing, batch size, manufacturing equipment, and manufacturing process. The guidance defined levels of changes, based on the likelihood of risk ocurrence and potential impact of postapproval changes upon the safety and efficacy of a drug product I suggested what a type of fing report should be submitted to the FDA for each level of change. Chemist, manufacturing, and control tests to be executed were also recommended for each change level The important tests specified in the guidance included batch release, stability, in vitro dissolution, and in vivo bioequivalence tests. However, there have been strong demands on revising the current SUPAC-IR in order to resolve some issues and to improve its usefulness in evaluating postapproval changes to immediate release solid oral dosage forms. In particular, the rigorous requirement of case C dissolution test and the definition of batch size were challenged by both academia and the industry. A revision work was in progress to reflect these inputs and to expand the utility of SUPAC-IR. As a result of these concerted efforts, an updated 2nd version of SPAC-IR would be likely to be issued ver soon to the public.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.19-23
• /
• 2004

The Hertzian indentation contact damage behavior of porous alumina with controlled pore shape was investigated by experiments. Porous alumina ceramics containing well-defined pore shape, size and distribution were prepared by incorporation of fugitive spherical starch. Porous alumina with isolated pore structure was prepared with porosity range up to 30%. The indentation stress-strain curves of porous alumina were constructed. Elastic modulus and yield stress can be obtained from the stress-strain relationship. Impulse excitation method for the measurement of elastic modulus was also conducted as well as Hertzian indentation and was confirmed as a useful tool to evaluate the elasticity of highly porous ceramics. Elastic modulus of the inter-connected pore structure is more sensitive to porosity than that of the isolated pore structure. When the specimen had isolated pore structure, higher yield point was obtained than it had inter-connected pore structure. This study proposed that the elastic modiulus of porous ceramics is strongly related to not only porosity, but also the structure of pore.

• Korean Parent-Child Health Journal
• /
• v.7 no.2
• /
• pp.121-132
• /
• 2004

Purpose: This study aimed to develop a breast feeding program for mothers of premature infants. The program was applied and its effect was evaluated on stress, knowledge and breastfeeding behaviors of premature infant mothers. Method: This study employed a one group pre- and post-test quasi-experimental design. The data were collected from 17 participants from August 15 to October 24, 2004, at a N1CU at D University Medical Center located in Susan, Korea. Data were analyzed by means of frequency, SD, and t-test using SPSS version 10. Result: After the program, participants significantly showed a greater level of knowledge than before the program (t=-5.750, p=.000). No statistically significant differences in stress level scores were found (t=1.453, p=.153). The breastfeeding practice rate was 94.1%: Conclusion: This educational program using a handbook and video had a positive effect on increasing knowledge and practice of breastfeeding among premature infant mothers. It is suggested that this study be replicated with a larger sample size to compare group responses.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.2
• /
• pp.51-59
• /
• 2006

So far, there is no technique of quantitative evaluation on danger related to industrial accidents. Therefore, as an endeavor for obtaining technique of quantitative evaluation, this study presents feature analysis of industrial accidents in manufacturing field using QUEST algorithm. In order to analyze feature of industrial accidents, a retrospective analysis was performed in 10,536 subjects (10,313 injured people, 223 deaths). The sample for this work chosen from data related to manufacturing businesses during three years $(2002\sim2004)$ in Korea. The analysis results were very informative since those enable us to know the most important variables such as occurrence type, company size, and occurrence time which can affect injured people. Also, it is found that classification using QUEST algorithm which was performed in this study is very reliable.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.5
• /
• pp.181-191
• /
• 2006

The main objective of this study is to analyze characteristics on the somatotype of modern adult women In order to standardize of products. The sample for this work chosen from data which were collected and measured by Size Korea during two years($2003{\sim}2004$). In order to analyze feature of the somatotype of modern adult women, analysis was peformed in 1,371 subjects(645 twenties women, 725 thirties women) about 21 body parts such as height(4 parts), width(3 parts), thickness(3 parts), circumference(7 parts), length(3 parts) and body weight. According to the result of analysis, it was found that the twenties group was near in slender somatotype, whereas the thirties group was near in fat somatotype compared to standard somatotype.

• Nuclear Engineering and Technology
• /
• v.36 no.4
• /
• pp.338-345
• /
• 2004

This study examines the sensitivity of several fabrication parameters for dry process fuel, using a random sampling technique. The in-pile performance of dry process fuel with irradiation was calculated by a modified ELESTRES code, which is the CANDU fuel performance code system. The performance of the fuel rod was then analyzed using a Monte Carlo simulation to obtain the uncertainty of the major outputs, such as the fuel centerline temperature, the fission gas pressure, and the plastic strain. It was proved by statistical analysis that for both the dry process fuel and the $UO_2$ fuel, pellet density is one of the most sensitive parameters, but as for the fission gas pressure, the density of the $UO_2$ fuel exhibits insensitive behavior compared to that of the dry process fuel. The grain size of the dry process fuel is insensitive to the fission gas pressure, while the grain size of the $UO_2$ fuel is correlative to the fission gas pressure. From the calculation with a typical CANDU reactor power envelop, the centerline temperature, fission gas pressure, and plastic strain of the dry process fuel are higher than those of the $UO_2$ fuel.

• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.287-298
• /
• 2004

As a part of Korea Deep Ocean Study program, we investigated the distribution of planktonic protists in the upper 200 m of the northeast Pacific from $5^{\circ}N$ to $17^{\circ}N$, along $131^{\circ}30'W$. Area of divergence was formed at $9^{\circ}N$ which is boundaries of the north equatorial counter current (NECC) and the north equatorial current (NEC) during this cruise. Chlorophyll-a concentration was higher in NECC than in NEC area. Pico chl-a(<$2\;{\mu}m$) to total chl-a accounted for average 89% in the study area. The contribution of pico chl-a to total chl-a was relatively high in NEC area than in NECC area. Biomass of planktonic protists, ranging from 635.3 to $1077.3\;mgC\;m^{-2}$(average $810\;mgC\;m^{-2}$), was most enhanced in NECC area and showed distinct latitudinal variation. Biomass of HNF ranged from 88.7 to $208.3\;mgC\;m^{-2}$ and comprised 15% of planktonic protists. Biomass of ciliates ranged from 123.6 to $393.0\;mgC\;m^{-2}$ and comprised 25% of planktonic protists. Biomass of HDF ranged from 407.2 to $607.8\;mgC\;m^{-2}$ and comprised 60% of planktonic protists. HDF was the most dominant component in both NECC and NEC areas. Nano-protist biomass accounted for more than 50% of total protists in the both areas. The contribution of nanoprotist to total protists biomass was relatively higher in NEC area than in NECC. The biomass of planktonic protists was significantly correlated with phytoplankton biomass in this study area. The size structure of phytoplankton biomass coincided with that of planktonic protists. This suggested that the structure of the planktonic protists community and the microbial food web were dependent on the size structure of the phytoplankton biomass. However, biomass and size structure of planktonic protist communities might be significantly influenced by physical characteristics of the water column and food concentration in this study area.

• Korean Journal of Environment and Ecology
• /
• v.22 no.1
• /
• pp.43-58
• /
• 2008

For this study, which was conducted in the summer from $2004\sim2007$, 10 small and medium sized streams in Korea were selected(Munsan and Gokreung Stream in the Han River watershed, Mi, Ssanggye and Nam Stream in the Nakdong River watershed, Gapeong and Jojong Stream in the Bukhan River watershed, Cheongmi, Yanghwa and Bokha Stream in the Namhan River watershed), and plant surveys were performed using the belt transect method on the most natural 1km sections of each stream in order to clarify the natural environment condition of the plants in each stream. In the results of the plant survey, the total number of plant species recorded was 296. After selecting 121 species of those surveyed plant in order of frequency, an RDA(Redundancy Analysis) and a Pearson Correlation Analysis were performed to determine the correlation between the selected plant species and environmental factors( such as distance from channel, size of bed material, number of bars, altitude, bed slope, width of channel, and measured data of water quality) of the study sites. There was no significant correlation between the 121 plant species and altitude, bed slope, and number of bars at the research sites, but the correlation of plant species with size of bed material, width of channel, electrical conductivity, and phosphate$(PO_4-P)$ concentration was from very high to moderate. Also, the spectrum of these plant species reflects the actual environmental conditions so the method used in the study seems to be correct, but owing to the range of diversity, the results of the study seem to be difficult to extend to other streams. Nevertheless, it is expected that this data can be used as a basic material for researching plants by stream characteristics or in selecting plant species for streams.