• 제목/요약/키워드: SIR : Stepped Impedance Resonators

검색결과 18건 처리시간 0.025초

SIR 공진기를 이용한 적층형 필터/듀플렉서 설계 (A design of a multi-layer filter/duplexer using stepped impedance resonator)

  • 이종훈;김영태;강병권;정명섭;박준석;임재봉
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
    • /
    • pp.169-172
    • /
    • 2002
  • In this paper, the design formulas for bandpass filters using parallel coupled stepped impedance resonators(SIR) are derived. General content about basic feature of stepped impedance resonators(SIR) is represented. The filters and duplexer using stepped impedance resonators(SIR) have been designed and realized with the presented design method at IMT-2000 frequency band Simulations have used serenade circuit simulation and HFSS EM-simulation. We were showed excellent agreements between SIR design theory and simulation results on the multi-layer filter/duplexer.

  • PDF

이중 모드 SIR과 평행 결합선로를 이용한 소형 3중-대역 대역통과 필터 설계 (Compact Tri-Band Bandpass Filter Using Dual-Mode Stepped-Impedance Resonators and Parallel Coupled-Lines)

  • 성규제;김 영
    • 한국항행학회논문지
    • /
    • 제27권1호
    • /
    • pp.57-62
    • /
    • 2023
  • 본 논문은 이중 모드 SIR(stepped-impedance resonator)과 평행 결합선로를 이용한 3중-대역 대역통과 필터를 제안한다. 제안된 필터는 단락 종단을 갖는 inter-digital 및 comb-line 형태의 평행 결합선로와 개방형 스터브를 갖는 U-자형 SIR로 구성되었다. 개방형 스터브가 있는 2개의 U-자형 SIR은 첫 번째와 세 번째 통과 대역을 만들고, 중앙의 평행 결합선로 공진기는 두 번째 통과 대역을 만든다. 5개의 공진기와 평행 결합선로 구조의 우/기모드 입력 임피던스를 해석하여 3중-대역 대역통과 필터의 산란 파라미터를 유도하였다. 유도된 산란 파라미터를 이용하여 새로운 3중-대역 대역통과 필터를 설계하고 제작하였다. 제작된 필터는 0.2×0.19 λg2의 작은 크기를 가지며, 측정 결과는 높은 대역 격리도를 보여 주고 있다.

Cross-Coupled Microstrip Combline Bandpass Filter Using Stepped-Impedance Resonators

  • Cho, Young-Ho;Choi, Seung-Un;Yun, Sang-Won
    • Journal of electromagnetic engineering and science
    • /
    • 제7권4호
    • /
    • pp.190-194
    • /
    • 2007
  • In this paper, a cross-coupled microstrip combline bandpass filter using stepped-impedance resonators(SIRs) is proposed. In order to improve the selectivity as well as the insertion loss, the SIR configuration is used. The cross coupling is also introduced to enhance the selectivity. The improvement of the insertion loss is demonstrated not only by deriving the quality factor of the SIR but through the measured performances. Both the proposed and the conventional combline bandpass filter with 5 % of fractional bandwidth at 2 GHz were fabricated and tested. Compared to the conventional combline bandpass filter, the proposed one exhibits the improved selectivity as well as the lower insertion loss characteristics.

개별 공진기의 EM 조정을 통한 SIR로 구성된 대역 여파기의 설계 (Design of an SIR BPF by a Novel EM Tuning of Individual Resonators)

  • 양승식;염경환
    • 한국전자파학회논문지
    • /
    • 제18권7호
    • /
    • pp.748-756
    • /
    • 2007
  • SIR(Stepped Impedance Resonator) 공진기로 구성된 대역 여파기는 특히 높은 주파수에서 fringing capacitance와 step 임피던스 불연속 영향으로 설계와 다른 왜곡된 주파수 응답을 가진다. 본 논문은 EM(Electromagnetic) 시뮬레이션을 통해 fringing capacitance와 step 임피던스 불연속 영향을 보상하는 절차를 보였다. 이 방법은 여파기에서 개별 공진기의 결합 전송선 및 결합 전송선을 연결하는 전송 선로를 체계적으로 조정하는 절차이며, 각 공진기 조정 후 제 결합하면 더 이상의 추가 조정을 요구하지 않는다. 또한, 본 방법의 타당성을 보이기 위하여 설계된 5단 SIR 여파기를 제작하여 EM 시뮬레이션 결과와 비교함으로써 방법의 타당성을 보였다.

SIR 구조를 이용한 초광대역 대역 통과 여파기의 설계 (The Implementation of UWB Bandpass Filter using SIR(Stepped Impedance Resonators) Structure)

  • 신승하;최창호;전계석
    • 한국통신학회논문지
    • /
    • 제35권12A호
    • /
    • pp.1214-1218
    • /
    • 2010
  • 본 연구에서는 병렬 결합된 전송 선로에 SIR 구조를 결합하여 가파른 차단 특성과 낮은 상업 손실을 갖는 소형 UWB 대역 통과 여파기를 설계하였다. 대역통과 여파가는 시뮬레이터를 이용하여 최적 설계하였으며, 제작된 대역통과 여파기의 통과대역은 3.1GHz-10.6GHz이고 삽입손실은 8.3GHz에서 0.39dB이며, 반사손실은 9.37GHz에서 12.394dB의 특성을 보였다. 따라서 본 연구에서 제안된 대역통과 여파기는 경량화이면서도 높은 차수가 가지는 가파른 차단 특성이 요구되는 초고속 통신 시스템에 적용될 수 있다.

Tunable Combline Bandpass Filter Using Cross-Coupled Stepped-Impedance Resonators with Enhanced Characteristics

  • Kim, Yoon-Hong;Cho, Young-Ho;Yun, Sang-Won
    • Journal of electromagnetic engineering and science
    • /
    • 제8권4호
    • /
    • pp.144-147
    • /
    • 2008
  • This paper proposes a tunable combline bandpass filter with high selectivity, constant bandwidth, and good stopband performances. A filter with these characteristics is obtained by applying cross-coupling to the conventional combline bandpass filter using stepped-impedance resonators(SIRs). For high selectivity and constant bandwidth, cross-coupling is utilized and the SIR configuration is used for enhanced stopband performances. The proposed combline tunable bandpass filter with 5% of fractional bandwidth at 1.6 GHz was fabricated and tested. The measured results showed 11.6% tunability with constant bandwidth, high selectivity and enhanced stopband characteristics.

DGS 구조를 갖는 마이크로스트립 다단 SIR 대역통과 여파기의 제작 (Fabrication of Microstrip Stacked-SIR Bandpass Filter with DGS)

  • 고동성;마태진;김정근
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
    • /
    • pp.331-334
    • /
    • 2003
  • This letter presents the design and measured performance of bandpass filters based on a stacked-SIR (stepped impedance resonators) configuration with DGS (Defected Ground Structure). An unit DGS configuration is designed and analyzed to show the phase characteristic of proposed slow-wave structure. The SIR filter with DGS has been yielded better stop band and sharper skirt behavior than conventional bandpass filter.

  • PDF

고온 초전도 에피텍셜 박막을 이용한 SIR 마이크로스트립 대역통과 필터의 제작 및 특성연구 (Fabrication & Characteristics of SIR Microsrip Bandpass Filters using Deposition of High-Tc Superconducting Epitaxial Films)

  • 박경국;정동철;정용채;임성훈;임성우;한병성
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제48권5호
    • /
    • pp.326-332
    • /
    • 1999
  • In this paper, we designed and fabricated High-Tc Superconducting (HTS) microstrip bandpass filters using Stepped Impedance Resonators(SIR) and studied on their characteristics. The $high-T_c$ superconducting $Y_1Ba_2Cu_3O_{7-x}$ epitaxial films were deposited by Pulse Laser Deposition (PLD) system on MgO. The fabricated filters were designed so as to operate in Ku band with central frequency 17.25 GHz, bandwidth 2.896% and ripple 0.01 dB. These filters were composed of parallel coupled microstrip SIR of which impedance ratio (K) are 0.5, 1.5. In the measured response, HTS filters had showed insertion loss below -0.5 dB. For comparison with normal conducting filter, we fabricated the Au counterpart that consists of the resonators as K=1.5 in the same dimension and measured performance of the Au filter. In comparison, HTS filter designed optimally got superior response to gold conterpart.

  • PDF

소형화된 구형 SIR을 이용한 대역통과필터 설계 및 제작 (A Design and Fabrication of Bandpass Filter using Miniaturized Square SIR)

  • 남훈;임영석
    • 대한전자공학회논문지TC
    • /
    • 제38권2호
    • /
    • pp.13-18
    • /
    • 2001
  • 본 논문에서는 소형화된 구형 SIR(Stepped Impedance Resonators)을 이용하여 IMT-2000에 적용할 수 있는 중심주파수 1.95GHz에서 60MHz의 대역폭을 갖는 4-극 준-타원 함수 대역통과필터를 설계 및 제작하였다. 시뮬레이션은 NUFDTD(Nonuniform Finite Difference Time Domain)을 사용하여 3가지 기본 결합구조에 대한 결합계수를 구하였다. 소형화된 구형 SIR은 기존의 마이크로스트립 구형 개방 루프 공진기 필터 보다 50% 이상의 크기를 감소됨을 알 수 있었다. SIR을 대역통과필터에 적용시 제 3고조파 내에서의 스퓨리어스 응답 특성은 최대 19dB의 우수한 특성을 보였으며, 실험한 결과와 시뮬레이션 결과가 잘 일치하였다.

  • PDF

SIR 구조의 피드 라인과 공진기를 이용한 마이크로스트립 이중대역 대역통과 여파기 (A Microstrip Dual-Band Band-Pass Filter Using Feed Lines and Resonators with SIR Structures)

  • 임지은;이재현
    • 한국전자파학회논문지
    • /
    • 제26권5호
    • /
    • pp.463-470
    • /
    • 2015
  • 본 논문은 SIR 구조의 피드라인과 공진기를 이용한 새로운 구조의 마이크로스트립 이중대역 대역통과여파기(BPF)를 제안한다. SIR 구조의 피드라인을 이용하여 이중대역 BPF의 두 통과대역 각각에서 입력과 출력 피드라인의 자기장 최대 지점을 서로 일치시켜 공진기와 피드라인 사이의 결합을 최대화하여 여파기 손실을 감소시켰다. 또한, 이중대역 BPF의 제1통과대역 공진기에도 SIR 구조를 적용하여 1) 두 통과대역 사이의 저지대역 특성을 개선시키고, 2) 제2통과대역 공진기와의 결합을 최소화시켜 공진기 간격을 감소시켜 소형화에 기여하였다. 이렇게 하여 이중대역 BPF 통과대역의 중심주파수와 대역폭을 독립적으로 변경시키는 것은 물론, 필터링 성능을 개선하였다. WLAN 규격을 만족하는 이중대역 BPF를 제작하고, 측정 결과와 비교하여 제안한 여파기 설계 방법이 유용하다는 것을 입증하였다.