• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11C
• /
• pp.694-701
• /
• 2011

This paper addresses a synchronization technique based on an adaptive combining of the sub-correlation functions obtained from multiband sine phased binary offset carrier (BOC) signals, allowing a BOC signal receiver to deal with multiband sine phased BOC signals. Specifically, we first obtain the sub-correlation functions composing the BOC autocorrelation function, and then, re-combine the sub-correlation functions generating a correlation function with no side-peak. Finally, by replacing the BOC autocorrelation with the correlation function with no side-peak in the delay lock loop, the proposed scheme performs unambiguous signal tracking. The proposed synchronization scheme is applicable to generic sine phased BOC signals. Numerical results demonstrate that the proposed scheme provides a performance improvement over the conventional unambiguous schemes in terms of the tracking error standard deviation.

• Journal of the Chungcheong Mathematical Society
• /
• v.26 no.4
• /
• pp.769-780
• /
• 2013

Motivated essentially by their potential for applications in a wide range of mathematical and physical problems, the log-sine and log-cosine integrals have been evaluated, in the existing literature on the subject, in many different ways. Very recently, Choi [6] presented explicit evaluations of some families of log-sine and log-cosine integrals by making use of the familiar Beta function. In the present sequel to the investigation [6], we evaluate the log-sine and log-cosine integrals involved in more complicated integrands than those in [6], by also using the Beta function.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.200-201
• /
• 2005

This paper is analyzed a new modulation method of OSW(Optimized Sine-Wave) modulation strategy for cascaded H-bridge multi-level inverter. The inverter structure was modified with the maximum output voltage level, and the switching angle was calculated easily to adjust the requested Vrms of the output. The suggested modulation method could make output waveform very close to the ideal sine wave, and the THD value was improved also remarkably.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.771-779
• /
• 1996

In this paper, double Fourier sine series is used as a modal displacement functions of a rectangular plate and applied to the free vibration analysis of a rectangular plate under various boundary conditions. The method of stationary potential energy is used to obtain the modal displacements of a plate. To enhance the flexibility of the double Fourier sine series, Lagrangian multipliers are utilized to match the geometric boundary conditions, and Stokes' transformation is used to handle the displacements that are not satisfied by the double Fourier sine series. The frequency parameters and mode shapes obtained by the present method are compared with those obtained by MSC/NASTRAN and other analysis.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.2
• /
• pp.32-38
• /
• 2015

A sine with dwell test is well known as a test scenario for evaluation of performance of electronic stability control(ESC) on passenger vehicles and heavy commercial vehicles. However, when it comes to ESC for medium commercial vehicles, the test scenario has not been established yet. In this paper, the sine with dwell test was modified considering characteristics of medium commercial vehicles. The three main modifications of the original test scenario are the steering angle level, steering frequency, and loading condition of the vehicle. These modifications are derived from simulation study for different medium commercial vehicles. From simulation study, it was shown that the ESC system for medium commercial vehicle is objectively evaluated by the proposed test scenario. A clear improvement on vehicle stability was seen in the results when ESC system was used.

• The Journal of Information Technology
• /
• v.8 no.3
• /
• pp.1-10
• /
• 2005

Cosine and Sine function is widely used for the arithmetic, translation, object drawing, Simulation and etc. of Computer Graphics in Natural Science and Engineering. In general, Cordic Algorithm is effective method since it has relatively small size and simple architecture on trigonometric function generation. However profitably it has those merits, the problem of operation speed is occurred. In graphic display system, the operation result of object drawing is quantized and has the condition that is satisfied with rms error less than 1. So in this paper, the proposed generator is composed of partition operation at each ${\pi}/4$ and basic Cosine, Sine function generator in the range of $0{\sim}{\pi}/4$ using the lower order of Tayler's series in an acceptable error range, that enlarge the range of $0{\sim}2{\pi}$ according to a definition of the trigonometric function for the purpose of having a high speed Cosine, Sine function generation. And, division operator using code partition for divisor three is proposed, the proposed function generator has high speed operation, but it has the problems in the other application parts with accurate results, is need to increase the speed of the multiplication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1179-1182
• /
• 2016

In this paper, a new method to reduce the size of ROM in the direct digital frequency synthesizer (DDFS) is proposed. This method use the sine-linear phase difference method and differential PCM. The new ROM compression method can reduce the ROM size by using the two ROM. The quantized value of sine-linear phase difference is saved by the ROM1 of the $2^N$ sample period. The ROM2 save the difference between the original sine-linear phase difference value and the saved sample value of the ROM1. The ROM compression ratio of 37% is achieved by this method. Also, the power consumption is decreased according to the ROM size reduction.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.80-84
• /
• 2010

Satellite structure should be designed to accommodate and support safely the payload and equipments necessary for its own missions and to secure satellite and payloads from severe laucnch enviroments. The lauch environments imposed on satellites are quasi-static accelerations, aerodynamic loads, acoustic loads and shock loads. To qualify the structure design against low-frequency dyanmic enviromnent, sine vibration test should be performed. During sine vibration test, the notchings are implemented in order to keep the payloads and equipments from excessive loading at their own main modes. This paper deals with sine test prediction, sine vibration test results, comparison of predicted values and tested values, and verification of Finite Element Model.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4467-4486
• /
• 2016

Discrete cosine transform (DCT) based JPEG standard significantly improves the coding efficiency of image compression, but it is unacceptable event in serious blocking artifacts at low bit rate and low efficiency of high-definition image. In the light of all phase digital filtering theory, this paper proposes a novel transform based on discrete sine transform (DST), which is called all phase discrete sine biorthogonal transform (APDSBT). Applying APDSBT to JPEG scheme, the blocking artifacts are reduced significantly. The reconstructed image of APDSBT-JPEG is better than that of DCT-JPEG in terms of objective quality and subjective effect. For improving the efficiency of JPEG coding, the structure of JPEG is analyzed. We analyze key factors in design and evaluation of JPEG compression on the massive parallel graphics processing units (GPUs) using the compute unified device architecture (CUDA) programming model. Experimental results show that the maximum speedup ratio of parallel algorithm of APDSBT-JPEG can reach more than 100 times with a very low version GPU. Some new parallel strategies are illustrated in this paper for improving the performance of parallel algorithm. With the optimal strategy, the efficiency can be improved over 10%.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.42-49
• /
• 1997

The extent of absorption and transmitance of the light that passes through some material is changed as the wavelength of the light varies, and which makdes it possible to estimate characteristics of the material. Spectrometer is a measurement system that can analyze the characteristics of material by using this principle. Its application field is so wide that it can be applied to all the arease that are concerned with analyzing materials : biological, environmental, medical and chemical area etc. This study is focused on developing precision sine drive mechanism for grating monochromator which is the most important part of the spectrometers. It is designed to be simple in struicture. It is achieved to derive basic principles to manipu- late precision sine drive mechanism : it should be aligned with a condition that .beta. , the angle between grat- ing normal and grating rod should be the same as .gamma. , the one between moving nut's normal and sliding guide. And also, it's found that the mis-alignments of the grating and mirrors are not the main factor in guaranteeing the linearity of sine drive mechanism. Performance evaluation is achieved by a standard sample by comparing experimental results with standard values. It results in wavelength accuracy of .+-. 0.5nm and resolution of 1nm. Conclusively, it can be verified that the sine drive mechanism developed in this study is not only simple in structure, but also stable and excellent in performanes.