• Journal of the Korean Magnetics Society
• /
• v.18 no.5
• /
• pp.163-167
• /
• 2008

The electronic structure and magnetism of superlattice systems consisted of Heusler compound $Co_2MnSi$ (CMS) and zinc-blende MnAs (MA) are investigated by means of the all-electron full potential linearized augmented plane wave method within the generalized gradient approximation. Four superlattice systems are considered, that is CMS(m)/MA(n), where m and n, being either 2 or 4, denote the number of alternatingly arrayed layers of the compounds in a superlattice along [001] direction. From the calculated total magnetic moments as well as the total density of states, it is found that neither of the four systems is half-metallic. It is also found that the Mn atoms are antiferromagnetically coupled in the systems of CMS2/MA2 and CMS2/MA4. The total and atom-resolved density of states of the four superlattices are compared with those of the bulk $Co_2MnSi$ and MnAs, and the influences of the change in the systems symmetry on the magnetism and half-metallicity are discussed.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.55-70
• /
• 2001

Granitoids in the Younggwang-Kimje area can be divided into two types of granite. One is foliated granite (Cheongup and Kochang foliated granites) developed along the NE-SW direction kwangju fault system and the other is undeformed granite (Kimje and Younggwang granites) developed in the western part of the area. $SiO_2$ content of study area, Younggwang granite is 62.8-74.0%, Kochang foliated granite is 64.5-74.4%, Cheongup foliated granite is 64.5-70.2%, Kimje granite is 63.4-72.0%. The result indicated that these granitoids belong to the intermediate and acidic rock. In Harker's diagram, as $SiO_2$ increases, $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $TiO_2$> $P_2O_{5}$s and MnO decrease, but $K_2O$ increases. In AFM diagram, Younggwang granite, Kochang foliated granite, Cheongup foliated granite and Kimje granite belong to calk-alkaline rock series. And in triangular diagrams of normative Qz-Or-Pl and An-Ab-Or, they are located in granodiorite and granite region. On the co-variation diagrams of trace elements with silica, Ba, Co, Li, Nb, An, Rb elements show increasing patterns. The diagrams of ACF and $Na_2O$ vs. $K_2O$ ratios indicate that granitoids of the study area belong to I-type.

• Journal of the Korean Magnetics Society
• /
• v.6 no.5
• /
• pp.323-328
• /
• 1996

NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$) trilayers were formed on the $4^{\circ}$ tilt-cut Si(111) substrate by rf magnetron sputtering method. With a Cu($50\;{\AA}$) underlayer, NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$) trilayers developed in-plane magnebc anisotropy and in-plane perpendicular alignment of easy axes in two magnetic components of NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$) trilayers has been found. The easy axis of Co layer consisbng of NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$) trilayers turned out to be along $4^{\circ}$ tilt Si <112> direcbon and that of NiFe layer along Si <110> direction. [NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$)]/Cu($50\;{\AA}$)/Si(111, $4^{\circ}$ tiIt-cut) trilayers showed about 2.2 % MR ratio at room temperature and large plateau in MR curves, which are more improved MR characteristics than those in [NiFe($60\;{\AA}$)/Cu($60\;{\AA}$)/Co($30\;{\AA}$)]/Cu($50\;{\AA}$)/glass trilayers with no appreciable magnetic anisotropy.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.6
• /
• pp.371-379
• /
• 2015

This study is purposed to seek the characteristics of both asbestos in accordance with acid and heat treatment for chrysotile and amosite used mainly as building materials. Results of acid treatment, the refractive index, the elongation sign, the extinction of acid-treated chrysotile were mostly similar to those of untreated chrysotile regardless of pH, elapsed time. But the characteristics of acid-treated chrysotile were different from those of untreated chrysotile after 8 weeks, at pH 1.2 acidic solution. When chrysotile treated with acid, weight ratio (%) of O and Mg fluctuated greatly in accordance with acid treatment unlike Si. But the change of constituents ratio (%) was small as time passed after acid treatment. The refractive index, the elongation sign and the extinction of acid-treated amosite were mostly similar to those of untreated amosite regardless of pH, elapsed time. When amosite was treated with acid, weight ratio (%) of Fe slightly increased. But in case of O, a contrary tendency was seen. Results of heat treatment, the higher the temperature, the more increased the refractive index of chrysotile. When chrysotile was heated for 10 minutes at $1,100^{\circ}C$, the elongation sign of chrysotile changed from positive(+) to negative(-). The extinction of chrysotile didn't change apparently in accordance with heat treatment. Also weight ratio (%) of O and Mg fluctuated greatly in accordance with heat treatment unlike Si. The higher the temperature, the more increased the refractive index of amosite. The elongation sign and the extinction of amosite didn't change apparently in accordance with heat treatment. Also weight ratio (%) of O and Fe fluctuated greatly in accordance with heat treatment. But weight ratio (%) of Si and Mg of heated amosite were mostly similar to those of untreated amosite regardless of temperature, heating time.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.286-293
• /
• 2015

The purpose of this study was to evaluate the set up accuracy using stereotactic body frame and frameless immobilizer for lung stereotactic body radiation therapy (SBRT). For total 40 lung cancer patients treated by SBRT, 20 patients using stereotactic body frame and other 20 patients using frameless immobilizer were separately enrolled in each group. The setup errors of each group depending on the immobilization methods were compared and analyzed. All patients received the dose of 48~60 Gy for 4 or 5 fractions. Before each treatment, a patient was first localized to the treatment isocenter using room lasers, and further aligned with a series of image guidance procedures; orthogonal kV radiographs, cone-beam CT, orthogonal fluoroscopy. The couch shifts during these procedures were recorded and analyzed for systematic and random errors of each group. Student t-test was performed to evaluate significant difference depending on the immobilization methods. The setup reproducibility was further analyzed using F-test with the random errors excluding the systematic setup errors. In addition, the ITV-PTV margin for each group was calculated. The setup errors for SBF were $0.05{\pm}0.25cm$ in vertical direction, $0.20{\pm}0.38cm$ in longitudinal direction, and $0.02{\pm}0.30cm$ in lateral direction, respectively. However the setup errors for frameless immobilizer showed a significant increase of $-0.24{\pm}0.25cm$ in vertical direction while similar results of $0.06{\pm}0.34cm$, $-0.02{\pm}0.25cm$ in longitudinal and lateral directions. ITV-PTV margins for SBF were 0.67 cm (vertical), 0.99 cm (longitudinal), and 0.83 cm (lateral), respectively. On the other hand, ITV-PTV margins for Frameless immobilizer were 0.75 cm (vertical), 0.96 cm (longitudinal), and 0.72 cm (lateral), indicating less than 1 mm difference for all directions. In conclusion, stereotactic body frame improves reproducibility of patient setup, resulted in 0.1~0.2 cm in both vertical and longitudinal directions. However the improvements are not substantial in clinic considering the effort and time consumption required for SBF setup.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.142-149
• /
• 1994

The Barkhausen noise was measured as the change of line width(39~1.22 mm) and scratching angle($90^{\circ}~50^{\circ}$) with respect of rolling direction in grain-oriented 3 % Si-Fe of 0.30 and 0.27 mm thickness. The two peak phenomena of the noise envelope observed for non-scratching and scratching of line width 39 mm was explained by large activation energy during $180^{\circ}$ domain wall nucleation and annihilation processes. The amplitudes of the noise envelpoes were decreased as the decrement of scratching line width, but did not almost changed below line width of 9.75 mm. It was explained that the decrease in the envelope with increasing scratching number is associated with lower activation energy of $180^{\circ}$ domain nucleation and annihilation in the vicinity of the scratching area. The noise power was decreased as narrower line width. The dependence of the power on the scratching angle was sharpest decreaded at the 50 angle.

• Nuclear Engineering and Technology
• /
• v.23 no.3
• /
• pp.316-320
• /
• 1991

The Core Operating Limit Supervisory System (COLSS) is digital computer based on-line monitoring system that is designed to assist the operator in monitoring of the Limiting Conditions for Operation. A current COLSS calculates axial power distribution based on in-core detector signals using 5th order Fourier series method. It was found that the 5th elder Fourier series method was not accurate for certain axial power shapes, especially saddle power shapes, resulting in thermal margin decrease. A cubic spline synthesis was applied to the COLSS in order to improve the axial power distribution monitoring for the various axial power shapes. The results showed that the cubic spline synthesis simulated more accurately the axial power shapes, up to 5% in RMS errors, compared to those of the Fourier series.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.91-91
• /
• 2017

트라이볼로지란? 상대운동을 하면서 서로 영향을 미치는 두면 및 이와 관련된 문제로 마찰, 마모, 윤활에 대한 것을 말한다. 트라이볼로지는 1960대에 조사 연구되기 시작하면서 학문적으로 많은 정리가 이루어졌고, 현재 현대사회에서 문제가 되고 있는 에너지 및 환경 문제를 해결할 수 있는 핵심 요소로 떠오르고 있다. 특히 4차 산업혁명시대를 맞이하여 많은 부분에서는 인공지능, 클라우딩, 빅 데이터 및 로봇 등을 이야기하고 이에 대한 투자 및 개발을 이야기하고 있지만, 이 4차 산업을 뒷받침할, 강인한 제조업이 없으면 불가능한 혁명이라고 말 할 수 있다. 특히 트라이볼로지는 제조업의 무인 자동화 및 무인 로봇 등 이를 필요로 하는 산업 기기와 같은 전반적인 부품 및 소재의 마모를 감소시켜, 기계 장치의 신뢰성을 증가시킬 수 있다. 마찰은 두 물체 상호간의 열 발생을 억제 시키고, 마모는 물체의 표면 경도가 높으면 높을수록 마모량이 적어진다고 알려져있다. 따라서 트라이볼로지와 관련한 표면 처리의 경우, 고온 환경에서의 사용성 증대 및 고경도화 그리고 저마찰을 위한 방향으로 개발 발전되어져 왔다. 트라이볼로지 코팅 중 내마모 코팅의 경우, 티타늄 원소를 기본으로 알루미늄(Al) 및 실리콘(Si)를 합금화하면서, 고경도화 및 내열성을 증대시키는 방향으로 발전되어 왔다. 그에 따라 표면경도의 경우, 4000 Hv, 내열성 $1200^{\circ}C$에 도달였다. 하지만 여전히 철계와의 마찰계수는 0.3 이상으로 이를 낮추는 방법이 요구되고 있다. 최근 트라이볼로지 코팅 중 카본을 함유한 비정질 다이아몬드상 카본 막 (Diamond like Carbon Film : DLC) 이나, Diamond 막의 수요 증가는 마찰을 낮추어 융착마모를 줄이려는 노력으로 볼 수 있다. 특히 수소를 포함하지 않는 고경도 탄소막인 ta-C(tetrahedral amorphous-Carbon)의 수요는 증대되고 있으며, 이에 대한 후막화 및 양산화 기술의 개발의 현재 isssu로 대두되고 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.929-934
• /
• 2009

In this work, the punchless piercing process with application of alternate high pressure has been proposed as a method to obtain pierced holes having nearly vertical wall over thin metal plates. The numerical simulation considering Lemaitre damage model has been accomplished for the proposed method. The simulated results have been compared with those by conventional one-way punch less piercing process. It has been revealed that the fractured section made by pressure alternation method shows nearly steep wall where the deviation angle from the vertical line is as small as $3.6^{\circ}$.

• Journal of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.97-102
• /
• 1981

The conversion of methanol to hydrocarbons has been studied over synthetic ZSM-5 zeolite catalyst having high silica to alumina ratio. The conversion products were olefins, paraffins, cycloparaffins, and aromatics, and the catalyst showed especially high selectivity toward the formation of aromatics. The catalyst showed the shape-selectivity and the size of molecules in the product was limited approximately to the size of 1,3,5-trimethylbenzene. Hydrogen form(HZSM-5) was more active, indicating reactions following the dehydration of methanol seemed to be mainly catalyzed by acid sites. Comparison of the reaction characteristics and acid site distribution of the ZSM-5 catalyst with those of mordenite and faujasite type catalysts suggests that cross-linked pore channel structure and the strong acidity of the ZSM-5 catalyst are primarily responsible for the selective formation of aromatics over this catalyst.