• 제목/요약/키워드: SGS model

검색결과 83건 처리시간 0.026초

Hα 방출선을 통한 Be 항성 원반 (DISK OF Be STAR WITH EMISSION)

  • 안대건;배장호;이상각;신영우;고연경;강석철
    • 천문학논총
    • /
    • 제22권4호
    • /
    • pp.133-140
    • /
    • 2007
  • 서울대학교의 61cm 망원경에 SGS 분광기를 부착하여 4개의 Be 항성에 대한 분광 관측을 수행하였다. 관측으로부터 얻은 각 항성의 $H{\alpha}$ 등가폭은 HD 5394가 $-26.4{\AA}$, HD 10516이 $-27.7{\AA}$, HD 200120이 $-10.2{\AA}$, HD 202904가 $-18.2{\AA}$이다. 이로부터 Grundstrom & Gies (2006)가 제시한 $H{\alpha}$ 방출선의 등가폭과 수소 방출선 영역의 크기 관계를 이용하여 구한 원반의 수소 방출선영역의 크기는 HD 5394가 $6.7{\pm}0.3R_{H{\alpha}}/R_s$, HD 10516이 $8.2{\pm}0.4R_{H{\alpha}}/R_s$, HD 200120이 $6.0{\pm}0.4R_{H{\alpha}}/R_s$, HD 202904가 $4.1{\pm}0.1R_{H{\alpha}}/R_s$이었다. HD 5394와 HD 10516에 대한 결과는 $H{\alpha}$ 간섭 관측으로부터 얻어진 결과와 약 20% 정도 차이가 났다. 항성의 광구에서 발생한 $H{\alpha}$ 흡수선의 등가폭을 정밀하게 보정하고, Grundstrom & Gies (2006)의 모형이 좀더 현실적으로 개선되며 정확한 항성 물리량 (유효온도, 원반 경사각, 원반 전체 크기)을 적용할 경우, 보다 정확한 원반크기를 구할 수 있을 것이다. 따라서 본 연구에서는 61cm 구경의 반사망원경과 범용의 중분산 분광기를 활용한 분광관측으로도 충분히 Be 항성의 원반 변화에 대한 연구를 수행할 수 있다는 것을 제시하고 있다.

CMMI 성숙도 3단계 SG간 상호 연관성 분석을 통한 표준 프로세스 정의 생산성 향상 (Increasing Productivity of Defining Standard Processes based on the Analysis of Relationship among SGs in CMMI Maturity Level 3)

  • 이민재;류성열;박남직
    • 한국정보과학회논문지:소프트웨어및응용
    • /
    • 제37권12호
    • /
    • pp.936-941
    • /
    • 2010
  • CMMI는 전체 5개 성숙도 단계, 22개의 프로세스 영역이 있고, 각 프로세스 영역은 SG와 GG로 구성돼 있다. 프로세스 영역 간에는 상호 연관된 부분들이 많아 조직의 표준 프로세스를 정의할 때, 중복적인 내용이 반영되는 경우가 많다. 본 연구에서는 피어슨상관분석을 통해 CMMI 성숙도 3단계 프로세스 영역의 전체 528개 SG중, 총 60개(약 11%)가 연관성이 높음을 파악하고 이 연관성을 고려한 표준 프로세스 정의 방안을 제안하였다. 또한 제안한 방안에 따라 표준 프로세스를 정의한 결과, 기존의 접근 방법을 사용했을 때 보다 생산성이 25% 향상되는 성과를 보였다.

Motion planning of a steam generator mobile tube-inspection robot

  • Xu, Biying;Li, Ge;Zhang, Kuan;Cai, Hegao;Zhao, Jie;Fan, Jizhuang
    • Nuclear Engineering and Technology
    • /
    • 제54권4호
    • /
    • pp.1374-1381
    • /
    • 2022
  • Under the influence of nuclear radiation, the reliability of steam generators (SGs) is an important factor in the efficiency and safety of nuclear power plant (NPP) reactors. Motion planning that remotely manipulates an SG mobile tube-inspection robot to inspect SG heat transfer tubes is the mainstream trend of NPP robot development. To achieve motion planning, conditional traversal is usually used for base position optimization, and then the A* algorithm is used for path planning. However, the proposed approach requires considerable processing time and has a single expansion during path planning and plan paths with many turns, which decreases the working speed of the robot. Therefore, to reduce the calculation time and improve the efficiency of motion planning, modifications such as the matrix method, improved parent node, turning cost, and improved expanded node were proposed in this study. We also present a comprehensive evaluation index to evaluate the performance of the improved algorithm. We validated the efficiency of the proposed method by planning on a tube sheet with square-type tube arrays and experimenting with Model SG.

직교격자계 기반의 수치계산법을 이용한 슬래밍 충격압력의 연구 (A Study on Slamming Impact Pressure by a Numerical Method based on the Cartesian-grid System)

  • 김기용;이영길;하윤진;강의하;박정호;이선규;이창진
    • 대한조선학회논문집
    • /
    • 제56권4호
    • /
    • pp.308-315
    • /
    • 2019
  • In this study, numerical simulations of slamming impact pressure acting on the flat plate and wedge type models using the cartesian-grid system and Modified Marker-Density Method (MMD method) were performed and the results were examined. The flat plate and wedge type models were selected as target objects, the turbulence characteristics were considered by applying the Sub-Grid Scale (SGS) turbulence model. Through this study, how the pressure acting on the target objects according to the incident angle influences the slamming impact pressure was examined and the results were compared with the flow characteristics of other experimental results. Also, the degree of slamming impact pressure is evaluated with respect to the cartesian-grid system and MMD method, which is easy to use and has a high degree of calculation for free surface.

국제투자조약상 포괄적 보호조항(Umbrella Clauses)의 해석에 관한 연구 (Interpretation of the Umbrella Clause in Investment Treaties)

  • 조희문
    • 한국중재학회지:중재연구
    • /
    • 제19권2호
    • /
    • pp.95-126
    • /
    • 2009
  • One of the controversial issues in investor-state investment arbitration is the interpretation of "umbrella clause" that is found in most BIT and FTAs. This treaty clause requires on Contracting State of treaty to observe all investment obligations entered into with foreign investors from the other Contracting State. This clause did not receive in-depth attention until SGS v. Pakistan and SGS v. Philippines cases produced starkly different conclusions on the relations about treaty-based jurisdiction and contract-based jurisdiction. More recent decisions by other arbitral tribunals continue to show different approaches in their interpretation of umbrella clauses. Following the SGS v. Philippines decision, some recent decisions understand that all contracts are covered by umbrella clause, for example, in Siemens A.G. v. Argentina, LG&E Energy Corp. v. Argentina, Sempra Energy Int'l v. Argentina and Enron Corp. V. Argentina. However, other recent decisions have found a different approach that only certain kinds of public contracts are covered by umbrella clauses, for example, in El Paso Energy Int'l Co. v. Argentina, Pan American Energy LLC v. Argentina and CMS Gas Transmission Co. v. Argentina. With relation to the exhaustion of domestic remedies, most of tribunals have the position that the contractual remedy should not affect the jurisdiction of BIT tribunal. Even some tribunals considered that there is no need to exhaust contract remedies before bringing BIT arbitration, provoking suspicion of the validity of sanctity of contract in front of treaty obligation. The decision of the Annulment Committee In CMS case in 2007 was an extraordinarily surprising one and poured oil on the debate. The Committee composed of the three respected international lawyers, Gilbert Guillaume and Nabil Elaraby, both from the ICJ, and professor James Crawford, the Rapportuer of the International Law Commission on the Draft Articles on the Responsibility of States for Internationally Wrongful Acts, observed that the arbitral tribunal made critical errors of law, however, noting that it has limited power to review and overturn the award. The position of the Committee was a direct attack on ICSID system showing as an internal recognition of ICSID itself that the current system of investor-state arbitration is problematic. States are coming to limit the scope of umbrella clauses. For example, the 2004 U.S. Model BIT detailed definition of the type of contracts for which breach of contract claims may be submitted to arbitration, to increase certainty and predictability. Latin American countries, in particular, Argentina, are feeling collectively victims of these pro-investor interpretations of the ICSID tribunals. In fact, BIT between developed and developing countries are negotiated to protect foreign investment from developing countries. This general characteristic of BIT reflects naturally on the provisions making them extremely protective for foreign investors. Naturally, developing countries seek to interpret restrictively BIT provisions, whereas developed countries try to interpret more expansively. As most of cases arising out of alleged violation of BIT are administered in the ICSID, a forum under the auspices of the World Bank, these Latin American countries have been raising the legitimacy deficit of the ICSID. The Argentine cases have been provoking many legal issues of international law, predicting crisis almost coming in actual investor-state arbitration system. Some Latin American countries, such as Bolivia, Venezuela, Ecuador, Argentina, already showed their dissatisfaction with the ICSID system considering withdrawing from it to minimize the eventual investor-state dispute. Thus the disagreement over umbrella clauses in their interpretation is becoming interpreted as an historical reflection on the continued tension between developing and developed countries on foreign investment. There is an academic and political discussion on the possible return of the Calvo Doctrine in Latin America. The paper will comment on these problems related to the interpretation of umbrella clause. The paper analyses ICSID cases involving principally Latin American countries to identify the critical legal issues arising between developing and developed countries. And the paper discusses alternatives in improving actual investor-State investment arbitration; inter alia, the introduction of an appellate system and treaty interpretation rules.

  • PDF

지하역사 승강장 및 대합실 평상시 비상시 급·배기 환기 Large Eddy Simulation (LARGE EDDY SIMULATION OF ORDINARY & EMERGENCY VENTILATION FLOW IN UNDERGROUND SUBWAY STATION)

  • 장용준;류지민;박덕신
    • 한국전산유체공학회지
    • /
    • 제18권3호
    • /
    • pp.72-78
    • /
    • 2013
  • The turbulent flow behavior of air supply and exhaustion in the Shin-gum-ho subway station is analyzed for ordinary and emergency state. The depth of Shin-gum-ho station is 43.6m which consists of the island-type platform(8th floor in underground) and a two-story lobby (first & second floor in underground). An emergency stairway connects between the platform and the lobby. Ventilation operation mode for ordinary state is set up as a combination of air supply and exhaustion in the lobby and platform, while for emergency state it is set up as a full air supply in the lobby and a full exhaustion in the platform. The entire station is covered for simulation. The ventilation diffusers are modeled as 95 square shapes of $0.6m{\times}0.6m$ in the lobby and as 222 square shapes of $0.6m{\times}0.6m$ and 4 rectangular shapes of $1.2m{\times}0.8m$ in the platform. The total of 7.5million grids are generated and whole domain is divided to 22 blocks for MPI efficiency of calculation. Large eddy simulation(LES) is applied to solve the momentum equation and Smagorinsky model($C_s$=0.2) is used as SGS(subgrid scale) model. The time-averaged velocity fields are compared to experimental data and show a good agreement with it.

디지털 시대의 의상 디자인 개발에 관한 연구 (A Study of Clothing Design in the Digital Age)

  • 배리사;이인성
    • 복식
    • /
    • 제54권4호
    • /
    • pp.63-74
    • /
    • 2004
  • This study shows that clothes to be just the same as the real thing can be Produced through the third dimension computer graphics, and then presents that not only the area of fashion design can be expanded in the virtual reality field by doing the simulation of the fashion show, but also the information can be made the real time public ownership and the communication can be fulfilled smoothly. In this study, analyzing the third dimension computer graphic programs to be used much at present, Alias Wavefront Company's Maya software which was the most effective in the clothes simulation and the clothes CAD SGS OptiTex 8.7 which went well substitutive for it were used of them. The conclusions of this study that got through the work manufacture are as follows: The first, if the file manufacturing in the clothes CAD by using the computer was stored, the pattern used 3D simulation was available because it could be summoned in 3D software. The second, if the data of DXF form in Maya program was summoned, they could not be applied by Maya Cloth supported in Nurbs only because they were recognized as the DXF_layer. So the curve along the outer lines of the pattern was drawn and Maya Cloth was applied to be possible to get the natural silhouette of clothes. The third, when the clothes were manufactured by 3D, if the draping character was applied according to the textile special quality, not only the control of textile's thickness, weight, quality feeling, and silhouette was available, but also the clothes were available to graft the special textile materials. The fourth, the natural motion of model was produced by capturing the actual model's walking action In order to produce the fashion show motion and also the dynamic fashion show was available by the angle of camera, the establishment of lighting, and etc. in the final rendering. The clothes manufactured by 3D are available to change the design by changing the materials, or by adding the details, or by utilizing the special materials on clothes. Therefore, the trial and error following at the clothes manufacture can be reduced. But the elevation of the rendering speed, the price down, the strengthening of personal security, and etc. are required.

내부조파기법을 활용한 Navier-Stokes 방정식 모형의 고립파 처오름 수치모의 (Numerical Simulation of Solitary Wave Run-up with an Internal Wave-Maker of Navier-Stokes Equations Model)

  • 하태민;김형준;조용식
    • 한국수자원학회논문집
    • /
    • 제43권9호
    • /
    • pp.801-811
    • /
    • 2010
  • 급경사에서의 고립파의 처오름을 예측하기 위해 3차원 수치모형에 내부조파기법을 도입하여 수치모형실험을 수행하였다. 수치모형은 Navier-Stokes 방정식을 유한차분법을 이용하여 계산하는 동수압 모형으로서, 난류의 해석을 위해서 상대적으로 큰 에디(eddy)만을 고려하는 SANS(spatially averaged Navier-Stokes) 방정식을 푸는 LES(large-eddy-simulation) 기반의 수치모형을 사용한다. 엇갈림 격자체계에서 유한차분법을 사용하여 지배방정식을 해석하는 모형으로서 수치기법으로 Two-step projection 기법을 사용하여 SANS 방정식을 풀었으며, Poisson 방정식을Bi-CGSTAB 기법을 이용하여 풀고 압력장을 계산하였다. 또한, 자유수면의 추적을 위하여 2차 정확도의 VOF(volume-of-fluid) 기법을 사용하였다. 먼저 고립파를 3차원 공간의 일정 수심상에서 내부조파하여 해석해와 비교한 후 분산오차에 대해 분석하였다. 그리고 고립파를 내부조파하여 급경사에서의 고립파의 처오름 및 처내림 현상을 예측하고 수리모형 실험결과와 비교 및 분석하였다.

규칙파 중 해양구조물의 갑판침입수 충격하중에 관한 수치시뮬레이션 (Numerical Simulation on the Greenwater Impact Load of Offshore Structure in Regular Waves)

  • 강의하;이영길;양인준;김기용;주영석;박정호
    • 대한조선학회논문집
    • /
    • 제54권6호
    • /
    • pp.492-500
    • /
    • 2017
  • In the study, numerical simulation on the greenwater impact load of free surface offshore structure in the regular waves using fixed cartesian grid system and Modified Marker-Density (MMD) method were carried out and the results were reviewed. In order to compare numerical simulation and experimental results, the FPSO with the scale ratio of 1/100 model ship with fixed rectangular deck was selected and turbulence characteristic of the flow was considered by applying the Sub-Grid Scale (SGS) in laminar flow. As a result, it is reviewed how the greenwater impact load inflowed from bow in regular headsea wave influence the flow on the deck and the flow characteristic by numerical simulation and the experiment results were compared and reviewed. Based on this study, it would be useful to numerically study the effect of greenwater on offshore structure.

경수로 연료봉을 지지하는 5×5 지지격자체의 자유진동특성 (Free Vibration Characteristics of 5 × 5 Spacer Grid Assembly Supporting the PWR Fuel Rod)

  • 강흥석;윤경호;송기남;최명환
    • 한국소음진동공학회논문집
    • /
    • 제14권6호
    • /
    • pp.512-519
    • /
    • 2004
  • This paper described the free vibration characteristics of Optimized H Type (OHT) spacer grids (SG) supporting the PWR fuel rod. The vibration test and the finite element (FE) analysis are performed under the free boundary condition and the clamped at two points (or three points) in the bottom which is the same one as the experimental condition for the dummy rod continuously supported by spacer grids. A modal test is conducted by the impulse excitation method using an impulse hammer and an accelerometer, and the TDAS module of the I-DEAS software is used to acquire and analyze the sensor signals. The softwares related to the FE analysis are the I-DEAS for the geometrical shape modeling and meshing, and the ABAQUS for solving. The fundamental frequency of the OHT SG by experiment under a clamped condition at two points is 175.18 Hz, and shows a bending mode. We think there is no resonance between the fuel rod and the SG because the SG's frequency is higher than that of the fuel rod existing in the range from 30 to 120 Hz. The fundamental frequency of the SG under the free boundary condition is 349.2 Hz showing a bending mode, and the results between the test and the analysis have a good agreement with maximum 7 % in error It is also found that the FE analysis model of the OHT SGs to analyze an impact, a buckling and vibration et al. has been generated with reliability.