• Physical Therapy Rehabilitation Science
• /
• v.5 no.4
• /
• pp.210-214
• /
• 2016

Objective: The aim of this study was to measure the muscle architectural parameters of abdominal muscles in healthy individuals by rehabilitative ultrasound imaging (RUSI) and to investigate their changes after bridging exercise in various environments. Design: Cross-sectional study. Methods: The study included 40 healthy participants (19 men, 21 women). Subjects were randomly allocated to a stable surface group (SG, n=20) or an unstable surface group (UG, n=20). The participants assumed three positions in rest, bridging exercise with knee flexion $60^{\circ}$, and bridging exercise with knee flexion $90^{\circ}$ for the measurement of abdominal muscle thickness by RUSI. For the resting position, the participants held the head neutral in a hook-lying position and the dominant side was measured. For contraction, the participants performed the bridging exercise with the knee joint in $60^{\circ}$ and $90^{\circ}$ of flexion for 10 seconds each. Results: For transversus abdominis, external oblique muscle thickness, within the stable surface group and the unstable surface group, no significant contraction difference was observed in both the $60^{\circ}$ and $90^{\circ}$ bridge exercise conditions. Contraction difference of internal oblique muscle was significantly larger at $90^{\circ}$ than at $60^{\circ}$ within the SG (p<0.05). But within the UG, no significant contraction difference was shown. There was no significant contraction difference between the surface group and the unstable SG at $60^{\circ}$ condition and at $90^{\circ}$ condition in all measured muscles. Conclusions: The contraction difference is different for each muscle during bridge exercise with knee flexion $60^{\circ}$ and bridging exercise with knee flexion $90^{\circ}$. Muscle contraction difference is generally large when exercised on an unstable surface than a stable surface, but these are not statistically significant when bridging exercise is performed using dynamic air cushion for unstable surface.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.1
• /
• pp.61-67
• /
• 2015

Recently, the initiation of outside diameter stress corrosion cracking (ODSCC) at the tube support plate region of domestic steam generators (SG) with Alloy600 HTMA tubes has been increasing. As a result, SGs with Alloy600 HTMA tubes must be replaced early or are scheduled to be replaced prior to their designed lifetime. ODSCC is one of the biggest threats to the integrity of SG tubes. Therefore, the accurate evaluation of tube integrity to determine ODSCC is needed. Eddy current testing (ECT) is conducted periodically, and its results could be input as parameters for evaluating the integrity of SG tubes. The reliability of an ECT inspection system depends on the performance of the inspection technique and abilty of the analyst. The detection probability and ECT sizing error of degradation are considered to be the performance indices of a nondestructive evaluation (NDE) system. This paper introduces an optimized evaluation method for ECT, as well as the sizing error, including the analyst performance. This study was based on the results of a round robin program in which 10 inspection analysts from 5 different companies participated. The analysis of ECT sizing results was performed using a linear regression model relating the true defect size data to the measured ECT size data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.5
• /
• pp.673-680
• /
• 2003

This study verified the relationship between fracture mechanics parameters(ΔK, ΔK$\sub$eff/, K$\sub$max/) and X-ray parameters (${\alpha}$$\sub$r/, B) for SG365 steel at elevated temperature up to 300$^{\circ}C$. The fatigue crack propagation test were carried out and X-ray diffraction technique according to crack length direction was applied to fatigue fractured surface. The residual stress on the fracture surface was found to increase low ΔK region, reach to a maximum value at a certain value of K$\sub$max/ or ΔK and then decrease. Residual stress were independent on stress ratio by arrangement of ΔK and half value breadth were independent by the arrangement of K$\sub$max/. The equation of ${\alpha}$$\sub$r/ - ΔK was established by the experimental data. Therefore, tincture mechanics parameters could be estimated by the measurement of X-ray parameters.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.3
• /
• pp.54-58
• /
• 2002

This study investigates a relationship between fracture mechanics parameters (Stress Intensity Factor Range: ΔK, Maximum Stress Intensity Factor; Kmax) and X-ray parameters (residual stress:$\sigma$r half-value breadth: B) for SG365 steel at elevated temperature up to 30$0^{\circ}C$. The fatigue crack propagation test were carried out and X-ray diffraction technique according to the direction of crack length was applied to fatigue fractured surface. The residual stress on the fracture surface was found to increase at low ΔK region, to reach a maximum value at a certain value of Kmax or ΔK and then to decrease. Residual stress was independent of stress ratio by arrangement of ΔK and half value breadth were independent of the arrangement of Kmax. The equation of $\sigma$r-ΔK was established by the experimental data. therefore, fracture mechanics parameters could be estimated by the measurement of X-ray parameters.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.317-323
• /
• 2001

This study verified the relationship between fracture mechanics parameters$({\Delta}K,\;{\Delta}K_{eff},\;K_{max})$ and X-ray parameters $(\sigma_r,\;B)$ for SG365 steel at elevated temperature up to $300^{\circ}C$. The fatigue crack propagation test were carried out and X-ray diffraction technique according to crack length direction was applied to fatigue fractured surface. The residual stress on the fracture surface was found to increase low ${\Delta}K$ region, reach to a maximum value at a certain value of $K_{max}\;or\;{\Delta}K$ and then decrease. Residual stress were independent on stress ratio by arrangement of ${\Delta}K$ and half value breadth were independent by the arrangement of $K_{max}$. The equation of $\sigma_r-{\Delta}K$ was established by the experimental data. Therefore, fracture mechanics parameters could be estimated by the measurement of X-ray parameters.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.28-29
• /
• 2006

To improve Mechanical and Thermal Properties of semiconducting materials in power cable, we have investigated those of semiconducting materials showed by changing the content of carbon black and Carbon Nanotube. Density were measured by EW-200SG. High temperature, heat degradation initiation temperature, and heat weight loss were measured by TGA (Thermogravimetric Analysis). The dimension of measurement temperature was $0[^{\circ}C]$ J to $700[^{\circ}C]$, and rising temperature was $10[^{\circ}C/min]$. Heat degradation initiation temperature from the TGA results was decreased according to increasing the content of Carbon Nanotube. That is, heat stabilities of EVA containing the weak VA (vinyl acetate) against heat was measured the lowest. From the results of the experiment applied in this study, it is evident that a small amount of Carbon nanotube additives significantly improved the Mechanical and Thermal Properties of semiconducting materials.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.31 no.1
• /
• pp.147-154
• /
• 2018

Objectives: This study aims to examine the improvement against facial wrinkles after needle-embedding therapy. Methods: The study participants were 10 women treated with needle-embedding therapy in the Korean Medical Clinic from September, 2011 to August, 2014. The subjects were treated every ten days for twenty days, totally three times, and the result of treatment was evaluated five times, such as pre-treatment, after each treatments, one month and two months later of the last treatment with ARAMO-SG. Results: 1. Depth and range of facial wrinkles, facial skin pore test, and sensitivity test were visibly improved after needle-embedding therapy and follow-up compared pre-treatment (p<0.05). 2. The significant improvements in facial skin texture test was not observed and sustained until the follow-up measurement at 2 months. 3. Any adverse reaction related to needle-embedding therapy did not happen. Conclusions: This study suggests that needle-embedding therapy can improve facial wrinkles. The positive results of this study support the requirement for additional research investigating the efficacy of needle-embedding therapy in women.

• Journal of Sensor Science and Technology
• /
• v.25 no.6
• /
• pp.431-434
• /
• 2016

Currently, the radial basis function network (RBFN) and various other neural networks are employed to classify gases using chemical sensors arrays, and their performance is steadily improving. In particular, the identification performance of the RBFN algorithm is being improved by optimizing parameters such as the center, width, and weight, and improved algorithms such as the radial basis function network-stochastic gradient (RBFN-SG) and radial basis function network-normalized stochastic gradient (RBFN-NSG) have been announced. In this study, we optimized the number of centers, which is one of the parameters of the RBFN-NSG algorithm, and observed the change in the identification performance. For the experiment, repeated measurement data of 8 samples were used, and the elbow method was applied to determine the optimal number of centers for each sample of input data. The experiment was carried out in two cases(the only one center per sample and the optimal number of centers obtained by elbow method), and the experimental results were compared using the mean square error (MSE). From the results of the experiments, we observed that the case having an optimal number of centers, obtained using the elbow method, showed a better identification performance than that without any optimization.

• Journal of Animal Environmental Science
• /
• v.14 no.1
• /
• pp.9-14
• /
• 2008

This study was carried out to determine the behavioral characteristics on season and group size of Hanwoo steer. Forty eight Hanwoo steers were video-recorded at 15, 17 and 19 months of age for behavioral measurement. Space allowance was kept consistence with either group. The results showed that eating behavior of Hanwoo steers was strongly influenced (p<0.05) during seasonal transition, being the lowest in summer and the highest in autumn. With seasonal transition, standing time would linearly increase (p<0.05). In summer, steers spent more (p<0.05) time tying down but relatively less (p<0.05) time walking and fighting, meanwhile they much less (p<0.05) scratching and rubbing. In autumn, steers showed more grooming behavior (p<0.05) contrasted to the other seasons. Steers spent more (p<0.05) walking time when raised in large group and increased (p<0.05) grooming frequency when raised in small group.

• International Commerce and Information Review
• /
• v.8 no.4
• /
• pp.209-227
• /
• 2006

This paper analyse current interpretation of the "causal link" that in particular, focuses principally on the so-called "non-attribution" requirement of Article 4.2(b) of the Safeguards Agreement. The safeguard measures are justified as a temporary economic adjustment to harm that is caused by an increase in imports. The problem with this justification is that there are other kinds of economic forces that may injure domestic industries, such as changes in consumer tastes, government spending or a lack thereof, and economic downturns. These problems do not justify government-imposed remedies. When factors therefore other than increased imports are causing injury to the domestic industry at the same time, such injury shall not be attributed to increased imports. The Appellate Body stressed that a contribution of third-party imports to the existence of serious injury must be sufficiently clear as to establish the existence of the causal link required, it found that Article 4.2(b) does not suggest that increased imports be the sole cause of the serious injury, or that other factors causing injury must be excluded from the determination of serious injury. The interest in separation is to ensure that a measure is not applied to remedy harm not caused by imports, but this basic point assumes that the harm is distinguishable in the first place. It also assumes that the safeguard is designed to respond to harm caused by imports. In fact safeguards were never intended to respond to this kind of unfair trade, but rather to provide whatever emergency relief might assist an ailing domestic industry if imports happened to be a part of that injury. The Appellate Body's insistence in breaking cause and effect down to minutia in the non-attribution analysis seems to be so overly intricate that it conflicts with it's broader focus on evaluating factors that effect harm on the industry as a whole.