• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.8-12
• /
• 1974

1. If one unity is given to the prongs whose ends touch each other for estimating the internal stresses occuring in it, the internal stresses which are developed in the open prongs can be evaluated by the ratio to the unity. In accordance with the above statement, an equation was derived as follows. For employing this equation, the prongs should be made as shown in Fig. I, and be measured A and B' as indicated in Fig. l. A more precise value will result as the angle (J becomes smaller. $CH=\frac{(A-B') (4W+A) (4W-A)}{2A[(2W+(A-B')][2W-(A-B')]}{\times}100%$ where A is thickness of the prong, B' is the distance between the two prongs shown in Fig. 1 and CH is the value of internal stress expressed by percentage. It precision is not required, the equation can be simplified as follows. $CH=\frac{A-B'}{A}{\times}200%$ 2. Under scheduled drying condition III the kiln, when the weight of a sample board is constant, the moisture content of the shell of a sample board in the case of a normal casehardening is lower than that of the equilibrium moisture content which is indicated by the Forest Products Laboratory, U. S. Department of Agriculture. This result is usually true, especially in a thin sample board. A thick unseasoned or reverse casehardened sample does not follow in the above statement. 3. The results in the comparison of drying rate with five different kinds of wood given in Table 1 show that the these drying rates, i.e., the quantity of water evaporated from the surface area of I centimeter square per hour, are graded by the order of their magnitude as follows. (1) Ginkgo biloba Linne (2) Diospyros Kaki Thumberg. (3) Pinus densiflora Sieb. et Zucc. (4) Larix kaempheri Sargent (5) Castanea crenata Sieb. et Zucc. It is shown, for example, that at the moisture content of 20 percent the highest value revealed by the Ginkgo biloba is in the order of 3.8 times as great as that for Castanea crenata Sieb. & Zucc. which has the lowest value. Especially below the moisture content of 26 percent, the drying rate, i.e., the function of moisture content in percentage, is represented by the linear equation. All of these linear equations are highly significant in testing the confficient of X i. e., moisture content in percentage. In the Table 2, the symbols are expressed as follows; Y is the quantity of water evaporated from the surface area of 1 centimeter square per hour, and X is the moisture content of the percentage. The drying rate is plotted against the moisture content of the percentage as in Fig. 2. 4. One hundred times the ratio(P%) of the number of samples occuring in the CH 4 class (from 76 to 100% of CH ratio) within the total number of saplmes tested to those of the total which underlie the given SR ratio is measured in Table 3. (The 9% indicated above is assumed as the danger probability in percentage). In summarizing above results, the conclusion is in Table 4. NOTE: In Table 4, the column numbers such as 1. 2 and 3 imply as follows, respectively. 1) The minimum SR ratio which does not reveal the CH 4, class is indicated as in the column 1. 2) The extent of SR ratio which is confined in the safety allowance of 30 percent is shown in the column 2. 3) The lowest limitation of SR ratio which gives the most danger probability of 100 percent is shown in column 3. In analyzing above results, it is clear that chestnut and larch easly form internal stress in comparison with persimmon and pine. However, in considering the fact that the revers, casehardening occured in fir and ginkgo, under the same drying condition with the others, it is deduced that fir and ginkgo form normal casehardening with difficulty in comparison with the other species tested. 5. All kinds of drying defects except casehardening are developed when the internal stresses are in excess of the ultimate strength of material in the case of long-lime loading. Under the drying condition at temperature of $170^{\circ}F$ and the lower humidity. the drying defects are not so severe. However, under the same conditions at $200^{\circ}F$, the lower humidity and not end coated, all sample boards develop severe drying defects. Especially the chestnut was very prone to form the drying defects such as casehardening and splitting.

• Progress in Medical Physics
• /
• v.23 no.1
• /
• pp.26-32
• /
• 2012

The magnification technique has recently become popular in bone radiography, mammography and other diagnostic examination. However, because of the finite size of X-ray focal spot, the magnification influences various imaging properties with resolution, noise and contrast. The purpose of study is to investigate the influence of magnification and focal spot size on digital imaging system using eDQE (effective detective quantum efficiency). Effective DQE is a metric reflecting overall system response including focal spot blur, magnification, scatter and grid response. The adult chest phantom employed in the Food and Drug Administration (FDA) was used to derive eDQE from eMTF (effective modulation transfer function), eNPS (effective noise power spectrum), scatter fraction and transmission fraction. According to results, spatial frequencies that eMTF is 10% with the magnification factor of 1.2, 1.4, 1.6, 1.8 and 2.0 are 2.76, 2.21, 1.78, 1.49 and 1.26 lp/mm respectively using small focal spot. The spatial frequencies that eMTF is 10% with the magnification factor of 1.2, 1.4, 1.6, 1.8 and 2.0 are 2.21, 1.66, 1.25, 0.93 and 0.73 lp/mm respectively using large focal spot. The eMTFs and eDQEs decreases with increasing magnification factor. Although there are no significant differences with focal spot size on eDQE (0), the eDQEs drops more sharply with large focal spot than small focal spot. The magnification imaging can enlarge the small size lesion and improve the contrast due to decrease of effective noise and scatter with air-gap effect. The enlargement of the image size can be helpful for visual detection of small image. However, focal spot blurring caused by finite size of focal spot shows more significant impact on spatial resolution than the improvement of other metrics resulted by magnification effect. Based on these results, appropriate magnification factor and focal spot size should be established to perform magnification imaging with digital radiography system.

• Journal of Korean Library and Information Science Society
• /
• v.4
• /
• pp.61-90
• /
• 1977

The historical development of books examination with utilizing science become inevitable to the machanization of library catalogues. With the advance of times, like this, a new- development of $Indention('||'&'||'$ : Kisun) must be sought for which is a kind of descriptive catalogues being used now. This paper is scheduled to grasp problems in the course of using and logical grounds of Indention which hal-e been used disordering. It must be considered that four kinds of Icdention settlement is suitable to the features of Korean letters. 1) TI-e must consider the features of Korean Language and Oriental Language writing(Japan, China). There must be a establishment of floating $Indention('||'&'||'E$ : Kisun), which are suitable for the writting style or hand writting man on the point of most of Koreans are depend upon hand witting, then books catalogues like western language, not left edge of the cards of the $Indention(B$ : Kisun) establishing, from edge to Call Number, from the last of the Call Number to First Indention(%-Bl63). First Indention(%-%%) to a space of Second $indention($\ulcorner^%)$ must be established and then, every catalogue and Indentions are distinguished surely. 2) \Then we consider the developing catalogue making in the future. It is important to establish a fixed $Indention('||'&'||'$ : Kisun) for machinization of typewriter(Korean, Mimeographing) and computer, etc ... not "Cm" unit but "Space" unit, and consider oriental letter, ne make more surplus space as a Indention, we can give anadaptablity of using machines. 3) Considering typography printing and type-setting printing by printing type, we must fit the $Indention(\ulcorner'||'&'||'$ : Kisun) as a "Cm" unit, and there must be a re-adjustment of $Indention(g$$ : Kisun) which considered the complexity of Call Number by a mass of collecting books like this, the establishment of Indention(E'||'&'||'j!: Kisun). We must not use a uilified one as a concrete conception by "Space" or "Cm" unit which has been used now but re-adjusted adaptably which can be fited as a method of making of catalogues. 4) The name of $Indcntion(J, S$ : Kisun) has becll called 7;arious methods until now, but English Indention which has been used without any concrete mexirig must be used as a ours fitable as a our mind. The above mentioned is presented as a Indention and examinational l~letilods by myself style, I wants these r i l l be helpful to the future developments of the machanization of Indention $(sf:$ Ki sun). Concrete studies must be continued in the future for development of $Indention(zj:$ : Kisun). : Kisun).

• Cartoon and Animation Studies
• /
• s.50
• /
• pp.215-237
• /
• 2018

I analyze orange that is consistently used, even though not consciously, in the films whose function and meaning are clear. In detail, there are examples of color in films, psychological phenomena of colors expressed in posters and opening titles, color characteristics of clothes and costumes, and semiotic analysis of color names in film titles. (1) Fact and Truth; civilization and criticism. The film tries to tell the truth than the fact. It represents facts as it is, but it presupposes truth. This is a unique characteristic of media films. The truth of the fact is not important. The film tells the truth believing and wanting to show off. The film, which has inherent characteristics of the gap between fact and truth, represents nature and civilization. It carries nature as it is and criticizes the harm of civilization. Orange is nature and civilization. Realistic films such as Hong Sang Soo and Kim Ki Duk, fall into this category. For example, there are A Taxi Driver(2017) and I Can Speak(2017). (2) Virtual History; fake images and memories. In Hollywood SF genres like The Matrix(1999), orange was dealt with virtual reality. However, in Korean films they are replaced by historical dramas. The representation of history becomes a virtual reality. Films such as The Fortress(2017), Masquerade(2012), and Roaring Currents(2014) deal with virtual history. In these films, orange is a fake image and memory. (3) Light=color; Aura. The color and light of orange is aura. At sunrise and sunset, the orange of the incandescent light is almost similar to that of the artificial light. Orange of tungsten makes the real characters surrealistic and mysterious. For example, there are The City of Madness(2016), The Man from Nowhere(2010), and Coinlocker Girl(2014). (4) Fantasy; communication with other worlds. Orange is a sweet fantasy. In our daily life, we go to a supermarket, share a chat with friends in a coffee shop, and spend time in front of a television. Orange makes our life free and dreams. It is the communication between the former being and the other world. This can be found in the sexual fantasy scenes of all genres. For example, there are Sunny(2011), Welcome To Dongmakgol(2005), and 200 Pounds Beauty(2006).

• Journal of Navigation and Port Research
• /
• v.36 no.6
• /
• pp.475-480
• /
• 2012

In order to establish eLoran (enhanced Long Range Navigation) system, it needs the advancement of receiver, transmitter, data channel addition for Loran information, differential Loran sites for compensating Loran-c signal and ASFs (Additional Secondary Factors) database, etc. In addition, the precise synchronization of transmitting station to the UTC (Coordinated Universal Time) is essential if Loran delivers the high absolute accuracy of navigation demanded for maritime harbor entrance. For better timing synchronization to the UTC among transmitting stations, it is necessary to measure and monitor the transmission delay of the station, and the correction information of the transmitting station should be provided to the user's receivers. In this paper we presented the measurement method of absolute delay of Pohang Loran transmitting station and developed a time delay measurement system and a phase monitoring system for Loran station. We achieved -2.23 us as a result of the absolute phase delay of Pohang station and the drift of Loran pulse of the station was measured about 0.3 us for a month period. Therefore it is necessary to measure the delay offset of transmitting station and to compensate the drift of the Loran signal for the high accuracy application of PNT (Positioning, Navigation and Timing).

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.8
• /
• pp.385-392
• /
• 2016

Market analysis for a business plain is required for the success in the modern world. Most important part in this analysis is pedestrian traffic counting. A traditional way for this is counting it in person. However, it causes high labor costs and mistakes. This paper proposes an automatic algorithm to measure the pedestrian traffic count using images with webcam. The proposed algorithm is composed of two parts: pedestrian area detection and movement tracking. In pedestrian area detection, moving blobs are extracted and pedestrian areas are detected using HoG features and Adaboost algorithm. In movement tracking, multi-level matching and false positive removal are applied to track pedestrian areas and count the pedestrian traffic. Multi-level matching is composed of 3 steps: (1) the similarity calculation between HoG area, (2) the similarity calculation of the estimated position with Kalman filtering, and (3) the similarity calculation of moving blobs in the pedestrian area detection. False positive removal is to remove invalid pedestrian area. To analyze the performance of the proposed algorithm, a comparison is performed with the previous human area detection and tracking algorithm. The proposed algorithm achieves 83.6% accuracy in the pedestrian traffic counting, which is better than the previous algorithm over 11%.

• Journal of Technologic Dentistry
• /
• v.31 no.3
• /
• pp.67-85
• /
• 2009

This study aims to provide the research for dental technician's stress prevention and management with basic materials by understanding dental technician's psychosocial stress level and examining relevant factors. The subject of this study is 255 dental technologists who work mainly in Seoul Gyeonggi district for a month of April of 2009 and I conducted cross-sectional study through self administered survey. The contents of survey include general feature, occupational feature, health behavior feature. I used Karasek's Job Content Questionnaire, JCQ and Psychosocial well-being index, PWI-SF as means of measurement. To compare the level of dental technician's psychosocial stress, I conducted t-test and ANOVA and I measured the factors that are related with psychosocial stress symptom with step by step multiple regressive analysis. According to the result of Cronbach's a value which is yielded to verify the reliability of means of measurement, the reliability of concept is sufficient. The detailed result of this study is as follows. 1. According to the result of analyzing the stress symptom in accordance with general feature and occupational feature, those dental technologists who are older and not married, graduate from junior college, have lower position, work at university hospital or general hospital show lower stress(p<0.05). There is no difference in the level of psychosocial stress with regard to duty related feature, period of service, daily average working hours, monthly average pay. 2. With regard to health behavior feature, those dental technologists who control weight better and have meal more regularly show lower stress(p<0.05). Those dental technicians who smoke, drink liquid and take a suitable sleep show low stress but the difference does not have significance statistically. 3. With regard to the factors of stress in the workplace, those dental technicians who have lower duty related requirement, have higher duty related control ability, have higher social support, have less instability of employment and have less workload and physical burden show lower stress(p<0.05). 4. According to the result of analyzing the factors that influence dental technologist's stress symptom, social support has the most enormous influence on stress symptom. Unstable employment, regular exercise, regular eating, daily average sleeping hours and technological capacity are also important in this order. According to the result of this study, those dental technicians who have higher social support, less instability of employment, do exercise more regularly, take enough sleep more soundly and have higher technological capacity show lower psychosocial stress symptom. Therefore, to adjust appropriately the dental technician's stress and properly maintain and improve the dental technician's mental health, effective management plan that enables dental technicians to maintain smooth human relationships for dental technicians should be sought. In addition, heath education and health management for dental technicians should be given more thoroughly so that they can establish desirable health behavior in daily life.

• International Journal of Costume and Fashion
• /
• v.7 no.1
• /
• pp.49-61
• /
• 2007

The subject of study concerns the color characteristics of clothing/accessories from �Chosun�a nd modern Korea. It particularly focuses on the colors of the �Jeogori? traditional jacket) which represents Korean traditional clothing. Color data were collected from 353 woman�s �Jegori�s from �Chosun�a nd modern Korea and divided into the predominant colors & sub colors, and analyzed with HV/C and PCCS. According to the analysis, the representative the predominant color of 'Chosun Jeogori' for woman is YR, Y and side one is R, YR. The p, dp, sf, ltg colors are frequently found and the freshness of most of them is medium or low which shows a calm-feeling. The p, and ltg tones are often found as a the predominant color and p, dp are also often found as a the side color. In the 'Chosun Jeogori' for woman, the predominant colors and the side colors spread in a similar frequency and most of them have medium or low freshness of the color that shows a calm-feeling. The side color is one of the R colors and it shows characteristics of traditional coloring such as �Jajoo Goreum? Among the �Jeogori�f or modern women, the R, YR, Y, and B colors are often used for the single-color �Jeogori? the Y, GY, N, G colors are for the colorful �Jeogori? The P, lt, and b tons of the color are often used for a single-color �Jeogori�a nd the p, lt, and W are for the colorful �Jeogori? For the colorful �Jeogori? the side color have a high freshness which shows that a strong image was used frequently as the dp, s, dk tons of the color were often used. According to an analysis of the coloring, the predominant color and the side color of �Chosun Jeogori�a re applied to create a harmony of analogy & contrast in one aspect of Moon & Spencer�s view. It is found that the predominant color and the side color are similar or contrasting in one view of the color harmony, except that the traditional the �Jeogori�i s colored by ideological and symbolic meanings. The predominant color and the side color of modern the �Jeogori�a re complementary colors which are applied to the indistinct relationship or contrasting harmony in one aspect of Moon & Spencer�s view of the color harmony. The characteristics of the color as above show that traditional the �Jeogori�r egards the side color as both the harmony of the colors in general and also of symbolic meaning, while modern the �Jeogori�f or woman has a tendency toward a cultural transition and is mixed with new colors focusing more on its the predominant color than on the general harmony and character of ideological & traditional coloring.

• Journal of Science and Technology Studies
• /
• v.13 no.1
• /
• pp.41-76
• /
• 2013

Based on an analysis of the Japanese animation director Kamiyama Kenji's Ghost in the Shell: Stand Alone Complex series, this paper discusses two important subjects in modern technoscience-cyborg and old age. In fact, age has been an important social and political category in the modern world, along with gender, race, and class. However, age has not been a significant research topic for STS scholars. Even though many of these investigators have extensively explored the complex relationship between gender and technoscience, especially after the publication of Donna Haraway's "Cyborg Manifesto" (1991), few of them have been interested in how age is reconfigured by modern science and technology. If women, as Haraway has claimed, can have a different political and cultural outlook by becoming cyborgs, then, can we expect a similar socio-cultural transformation with regard to the interaction between cyborg and old age? Do the elderly experience lesser age discrimination through the growth of biomedicine and technoscience? Indeed, it is believed that seniors are increasingly becoming cyborgs with advancing age, since their declining bodily functions are consistently replaced and assisted by various biomedical technologies. Does this enable them to overcome ageism and age discrimination as well as their alleged physiological and mental limitations? As an answer to this question, Mike Featherstone has asserted that becoming a cyborg in old age could make the wrinkled skin a mere mask and create diverse new possibilities that were hitherto unavailable to an aging person. Based on my reading of Ghost in the Shell, however, I analyze a more complex set of problems when the senile cyborg is created through the encounter between the elderly and technoscience. I argue that while the senile cyborg could challenge traditional family ideology and nationalism it would leave ageism intact and define a new individualistic life form through a body controlled within the globalized internet and capitalist economy.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.4
• /
• pp.363-367
• /
• 2016

Objective : To compare the fusion rate of a hydroxyapatite demineralized bone matrix (DBM) with post-laminectomy acquired autograft in lumbar interbody fusion surgery and to evaluate the correlation between fusion rate and clinical outcome. Methods : From January 2013 to April 2014, 98 patients underwent lumbar interbody fusion surgery with hydroxyapatite DBM (HA-DBM group) in our institute. Of those patients, 65 received complete CT scans for 12 months postoperatively in order to evaluate fusion status. For comparison with autograft, we selected another 65 patients who underwent lumbar interbody fusion surgery with post-laminectomy acquired autograft (Autograft group) during the same period. Both fusion material groups were matched in terms of age, sex, body mass index (BMI), and bone mineral density (BMD). To evaluate the clinical outcomes, we analyzed the results of visual analogue scale (VAS), Oswestry Disability Index (ODI), and Short Form Health Survey (SF-36). Results : We reviewed the CT scans of 149 fusion levels in 130 patients (HA-DBM group, 75 levels/65 patients; Autograft group, 74 levels/65 patients). Age, sex, BMI, and BMD were not significantly different between the groups (p=0.528, p=0.848, p=0.527, and p=0.610, respectively). The HA-DBM group showed 39 of 75 fused levels (52%), and the Autograft group showed 46 of 74 fused levels (62.2%). This difference was not statistically significant (p=0.21). In the HA-DBM group, older age and low BMD were significantly associated with non-fusion (61.24 vs. 66.68, p=0.027; -1.63 vs. -2.29, p=0.015, respectively). VAS and ODI showed significant improvement after surgery when fusion was successfully achieved in both groups (p=0.004, p=0.002, HA-DBM group; p=0.012, p=0.03, Autograft group). Conclusion : The fusion rates of the hydroxyapatite DBM and Autograft groups were not significantly different. In addition, clinical outcomes were similar between the groups. However, older age and low BMD are risk factors that might induce non-union after surgery with hydroxyapatite DBM.