• 한국인쇄학회지
• /
• 제26권2호
• /
• pp.15-30
• /
• 2008

Studies were carried out the phenomenal observation on the effect of corona treated hotmelt laminating film in process of manufacture by 2 kinds of experiments. These are as follow: 1) In order to verify the treatment reducing value of dynes and dynes durability with the lapse of time, it was checked dynes of a pair of 4 bar discharge electrode with 9 one for 144 hr., and it show results that 9 bar discharge electrode has higher initial dynes as well as keep up 48 dynes durability long than 4 one. 2) Drawn an inference from 3 actions -Chemical-Physical-Mechanical, on laminating film in terms of SEM's observation that are the adhesive status in boundary of corona treated base film, extrusion coating hotmelt layer, and configuration of hotmelt surface after corona treated. In tandem system, EVA layers adhesion keep its stability without corona discharge treatment.

• 한국치위생학회지
• /
• 제8권4호
• /
• pp.241-250
• /
• 2008

In this study, specimens such as tongue, supragingival and subgingival biofilm were taken from total 20 scaling subjects who visited the oral prophylaxis practice lab at department of dental hygienics, J Health College in order to observe bacterial distributions and morphology using scanning electron microscopy(sem). as a result, this study came to the following conclusions: 1. According to observation of tongue, supragingival and subgingival biofilm through sem, it is found that there are round colonies of gram-positive cocci and gram-negative bacilli on blood agar medium. 2. The observation of bacterial morphology on dental biofilm through sem, cocci in chain cocci in cluster and bacillus(rod) respectively. 3. For tongue biofilm, it is found that a variety of bacterial species are detected, such as Granulicatolla adiacens(1), Gemella morbillorum(3), Streptococcus mitis(2), Streptococcus sanguinis(1), Aerococcus viridans (2), Streptococcus equinus(1), Leuconostoc spp.(1), Gemella haemolysans (1) and Lactococcus lactis spp.(1) respectively. 4. For supragingival biofilm, it is found that a variety of bacterial species detected, such as Aerococcus viridans(1), Gemella haemolysans(2), Leuconostoc spp.(2), Gemella morbillorum(1) and Pseudomonas fluoescens (1) respectively. 5. For subgingival biofilm, it is found that a variety of bacterial species detected, such as Leuconostoc spp.(1), Staphylococcus lugdunensis(1) and Streptococcus salivarius(1) respectively.

• Corrosion Science and Technology
• /
• 제23권2호
• /
• pp.113-120
• /
• 2024

An attempt was made to apply digital image correlation (DIC) strain analysis to in-situ scanning electron microscopy (SEM) observations of bending deformation to quantify local strain distribution inside a ZnMgAl-alloy coating in deformation. Interstitial-free steel sheets were hot-dipped in a Zn-3Mg-6Al (mass%) alloy melt at 400 ℃ for 2 s. The specimens were deformed using a miniature-sized 4-point bending test machine inside the SEM chamber. The observed in situ SEM images were used for DIC strain analysis. The hot-dip ZnMgAl-alloy coating exhibited a solidification microstructure composed of a three-phase eutectic of fine Al (fcc), Zn (hcp), and Zn2Mg phases surrounding the primary solidified Al phases. The relatively coarsened Zn₂Mg phases were locally observed inside the ZnMgAl-alloy coating. The DIC strain analysis revealed that the strain was localized in the primary solidified Al phases and fine eutectic microstructure around the Zn₂Mg phase. The results indicated high deformability of the multi-phase microstructure of the ZnMgAl-alloy coating.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권3호
• /
• pp.35-42
• /
• 2004

This research describes that the cutting characteristics and tool wear behavior in the micro cutting of three kinds of wear resistant cemented carbides (WC-Co; V40, V50 and V60) using PCD (Poly Crystalline Diamond) and PCBN (Poly crystalline Cubic Boron Nitride) cutting tools by use of the SEM (Scanning Electron Microscope) direct observation method. The purpose of this research is to present reasonable cutting conditions from the viewpoint of high efficient cutting refer to a precise finished surface and tool wear. Summary of the results is as follows: (1) The cutting forces tend to increase as the increase of the weight percentage of WC particles, and the thrust forces was larger than the principal forces in the cutting of WC-Co. These phenomena were different from the ordinary cutting such as cutting of steel or cast iron. (2) The cutting speed hardly influenced the thrust force, because of the frictional force between the cutting tool edge and small WC particles at low cutting speed region such as 2$\mu\textrm{m}$/s. It seemed that the thrust cutting force occurred by the contact between the flank face and work material near the cutting edge. (3) The wear mechanism for PCD tools is abrasion by hard WC particles of the work materials, which leads diamond grain to be detached from the bond. (4) From the SEM direct observation in cutting the WC-Co, it seems that WC particles are broken and come into contact with the tool edge directly. This causes tool wear, resulting in severe tool damage. (5) In the orthogonal micro cutting of WC-Co, the tool wear in the flank face was formed bigger than that in the rake face on orthogonal micro cutting. And the machining surface integrity on the side of the cutting tool with a negative rake angle was better than that with a positive one, as well as burr in the case of using the cutting tool with a negative rake angle was formed very little compared to the that with a positive one.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.37-45
• /
• 1994

The possibility of reusing the paper sludge as a raw material of composition board mixed with cement was investigated. For the measurement of physical and mechanical properties, wood coment board and sludge combinend cement boards were fabricated with the three weigh ratios of paper sludge 10 % (SI), 20 % (S II) and 30 % (S III) to cement weight. For adding the cement hardning, $CaCl_2$ was also added to each mixed paste with the ratio of 1 %, 3 % and 5 % to cement weight, respectively. Crystal formation in paper sludge-, wood-cement composites was observed by scanning electron microscope. The results were summarized as follows. 1. Density and partial compressive strength of each specimens were relatively high in the order of sludge I, sludge II, Korean pine, Italian poplar and sludge III, sludge I, Korean pine, sludge II, Italian poplar and sludge III. 2. The mechanical properties of sludge-cement boards (S I and II) were higher than that of wood-cement boards prepared with Korean pine and Italian poplar. But the mechanical properties of wood-cement boards were improved by the adding of $CaCl_2$. 3. Water absorption and thickness swelling were increased with increase of sludge content to cement weight. 4. In SEM observation, sludge-cement composites showed sufficiently formed crystals but wood-cement composites showed poorly formed crystals.

• 한국전자현미경학회:학술대회논문집
• /
• 한국현미경학회 1997년도 제28차 춘계학술대회
• /
• pp.13-13
• /
• 1997

• 한국전자현미경학회:학술대회논문집
• /
• 한국현미경학회 1999년도 제30차 춘계학술대회
• /
• pp.53-56
• /
• 1999

• Toxicological Research
• /
• 제6권1호
• /
• pp.1-12
• /
• 1990

Effect of red ginseng treatment on experimentally induced hyperkeratosis was investigated by light microscopic observation scanning electron microxcope (SEM) examination, epidermal enzyme activities nd lipid contents. Both light microscopic observation and SEM examination showed that hexadecane induced epidermal hyperplasia, hypertrophy and hyperkeratosis by increasing the numbers as well as the sizes of epidermal cells including desquamating horny cells. The superficial horny cells were protruded around the base of hair shaft. Among red ginseng components, only saponin treatment inhibited epidermal hyperplasia and hyperkeratosis by reducing the thickness of epidermis and arranging the cornified cells. Saponin from korean red ginseng inhibited abnormally increased epidermal LDH, ICD and G6PDH activities and reduced the contents of epidermal lipids induced by hexadecane. It seems that red ginseng saponin has preventive effect on experimental hyperkeratosis possibly by controlling the enzyme activities involved in epidermal cellular metabolism, resulting in reduced amounts of abnormal epidermal lipids.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제19권1호
• /
• pp.181-185
• /
• 2009

In this paper, the regenerated silk fibroin (SF)/hydroxypropyl methylcellulose (HPMC) blend filaments were prepared by wet spinning and the effect of HPMC concentration on the post drawing and morphology of blend filaments was elucidated. The result of maximum draw ratio indicated that the wet spinnability of wet spun SF / HPMC was improved with increasing HPMC concentration until 8% and remained constant after that concentration. The SEM observation revealed that the enhanced wet spinnability of blend filaments was strongly related to the morphological change by increasing HPMC concentration. Regardless of HPMC concentration, as SF content was reduced, the wet spinnability of blend film decreased resulting in reduced maximum draw ratio. It was also found by SEM observation that the cross section of blend filament deviated from circularity with an increase of HPMC content.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.100-107
• /
• 2011

To evaluate the wear characteristics of very thin ceramic coated layer, it is very important to investigate its wear process in great detail. An effective method for investigating the wear of a thin layer is the observation of wear process in microscopic detail, using in-situ system. In this study, based on the SEM Tribosystem as in-situ system, the microscopic wear mode of TiN coatings was investigated in repeated sliding. Consequently, four modes were revealed for TiN coatings: Ploughing, powder formation, flake formation and coating delimitation. Sc(Severity of contact) can clarify transition condition of those microscopic wear modes.