• 한국해양공학회지
• /
• 제31권2호
• /
• pp.111-120
• /
• 2017

It is generally acknowledged that the Steel Catenary Riser (SCR) is the most cost-effective riser type for deep-water offshore fields among various risers, including the SCR, flexible riser, and hybrid riser. However, in West Africa, the SCR type may not be suitable for FPSO systems because the large vertical motion of the floater brings about a considerable riser dynamic response. In this paper, an SCR system is designed for the FPSO in the West African field, where the use of a hybrid riser has been preferred. The proposed SCR configuration fulfills the design criteria of the API, such as the strength check and fatigue life. Moreover, a sensitivity analysis is also carried out to improve the certainty in the SCR design of a deep-water FPSO. The parameters affecting the strength and fatigue performance of the SCR are considered.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3096-3101
• /
• 2008

Selective Catalytic Reduction (SCR) technology is well-known to be effective for the reduction of NOx emission. So car manufacturers has adopted Ures-SCR system to be satisfied with emission regulation. This paper discusses the effective of $NH_3/NOx$ ratio and SCR catalyst temperature in the $NH_3$-SCR reactor on DeNOx performance. So it is shown the characteristic of NOx conversion and ammonia slip using the $NH_3$ instead of Urea-Solution. From the result of this study, it is found to optimize $NH_3/NOx$ ratio to have the best case of high NOx conversion and low ammonia slip at variable SCR catalyst temperatures. Lastly, it is also found the characteristics of NOx conversion and ammonia slip with compared with Urea.

• Korean Chemical Engineering Research
• /
• 제49권1호
• /
• pp.89-94
• /
• 2011

하이브리드 SNCR-SCR 공정의 질소산화물 저감특성을 파일럿 규모의 흐름반응기를 이용하여 고찰하였다. SNCR 공정의 질소산화물 저감효율은 $970^{\circ}C$에서 80% 수준이었으며 하이브리드 SNCR-SCR 공정은 NSR = 2.0, $940{^{\circ}C}$에서 92%의 저감율을 보였다. SNCR 단일 공정과 비교할 때, 하이브리드 SNCR-SCR 공정은 $940^{\circ}C$보다 낮은 저온영역에서 보다 효과적이었다. 암모니아 유출농도는 비교적 높은 공간속도조건에서 1 ppm 이하로 유지되었으며 요구되는 촉매양은 SCR 단일공정과 비교할 때 2/3 수준으로 감소하였다. 질소산화물 저감을 위한 하이브리드 SNCR-SCR 공정의 주요인자는 SNCR 공정에 분사되는 요소용액의 질소산화물에 대한 선택도와 생성되는 암모니아 농도로 조사되었다.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.24-30
• /
• 2010

In this study, numerical experiments were carried out to estimate the SCR De-NOx performance in DOC plus SCR systems. The SCR De-NOx phenomena are described by Langmuir-Hinshelwood reaction scheme. After validating the present approach by comparing the present results with the experimental results, such various parameters as space velocity, $H_2O$ concentration, $NO_2$/NOx ratio and relative volume of DOC are explored to increase the SCR De-NOx performance. The results indicate that SCR De-NOx performance largely depends on space velocity and $NO_2$/NOx ratio, especially below $200^{\circ}C$. SCR De-NOx performance is seriously affected by relative volume of DOC with SCR due to increasing in $NO_2$/NOx ratio at below $250^{\circ}C$.

• 에너지공학
• /
• 제29권2호
• /
• pp.10-22
• /
• 2020

미세먼지 문제 해결에 대한 국민적 요구가 높아짐에 따라 정부에서는 강도 높은 미세먼지 관련 대책을 발표하고 있다. 그래서 최근에 미세먼지의 전구체 중에서 질소산화물을 제거하기 위한 배연탈질기술로서 선택적 촉매환원법(SCR)이 주목받고 있다. 본 연구에서는 미세먼지 관련 정부정책과 시장 및 기술개발 현황을 조사하고, SCR 기술이 산업체에 적용되는 경우를 Case별로 구분하여 시나리오별 경제성 분석을 실시하였다. 시나리오별 경제성 분석의 결과는 NPV로 산출하였으며, 탈질설비가 구축되어 있지 않은 기업(Case 1)이 일반 SCR 기술을 신규로 도입하는 경우(Scenario 1-1)와 저온 SCR 기술을 신규로 도입하는 경우(Scenario 1-2)를 분석하였다. 그리고 탈질설비가 이미 구축되어 있는 기업(Case 2)이 일반 SCR 기술을 그대로 사용하는 경우(Scenario 2-1)와 저온 SCR 기술로 대체하는 경우(Scenario 2-2)로 구분하여 분석하였으며, 모든 시나리오별 NPV 결과를 바탕으로 비교 분석을 실시하였다.

• 한국초지조사료학회지
• /
• 제17권3호
• /
• pp.277-284
• /
• 1997

With a purpose of finding out the influences of herbicide treatment method on the forage yield, nutrient productivity, weed control, and persistency in the Rumex acetosella dominated pasture, this trial was arranged as a randomized block design with six treatments[1.Seeding(control), 2. Lime+seeding 3. glyphosate 4 $\scr{l}$ + dicamba 2 $\scr{l}$ /ha+seeding 4. glyphosate 4$\scr{l}$ +dicamba 2$\scr{l}$ /ha+lime+seeding 5. glyphosate 4$\scr{l}$ +dicamba 21 / ha+seeding+dicamba 4 $\scr{l}$ /ha and 6. glyphosate 4 $\scr{l}$ +dicamba 2 $\scr{l}$ /ha+ lime+ seeding+dicamba 4 $\scr{l}$ /ha], and conducted in Hwasung Kyonggi Province and in Youngam, Jeonnarn Province from June, 1992 to October, 1995. In the Rumex acetosella dominated pasture, the treatments of glyphosate 4$\scr{l}$ +dicamba 21 /ha+lime+ seeding+dicamba 4 $\scr{l}$/ha controlled 88-98% of the weed (Rumex acetosella), increased 88- 173% of forage yield, and were high 82- 175% of energy (TDN and NEL) productivity than those of the control(seeding), respectively. The results of this study indicated that herbicide treatment was effective for the control of Rumex acetosella, and good renovation of grassland and higher DM yield of forage could be obtained by twice application of glyphosate 4 $\scr{l}$+ dicamba 2 $\scr{l}$ /ha and dicamba 4 $\scr{l}$ /ha.

• 한국환경과학회지
• /
• 제12권1호
• /
• pp.47-54
• /
• 2003

This paper have examined the optimum combination of SNCR and SCR by varying SNCR injection temperature and NSR ratio along with SCR space velocity. NOx reduction experiments using a SNCR/SCR combined process have been conducted in simple NO/NH$_3$/O$_2$ gas mixtures. Total gas flow rate was kept constant 4 liter/min throughout the SNCR and SCR reactors, where initial NOx concentration was 500 ppm in the presence of 5% O$_2$. Commercial catalyst, sulfated V$_2$O$\_$5/-WO$_3$/TiO$_2$, was used for SCR NOx reduction. The residence time and space velocity were around 1.67 sec, 2,400 h$\^$-1/ and 6,000 h$\^$-1/ in the SNCR and SCR reactors, respectively. SNCR NOx reduction effectively occurred in a temperature window of 900-950$^{\circ}C$. About 88% NOx reduction was achieved with an optimum temperature of 950$^{\circ}C$ and NSR=1.5. SCR NOx reduction using commercial V$_2$O$\_$5/-WO$_3$-SO$_4$/TiO$_2$ catalyst occurred in a temperature window of 200-450$^{\circ}C$ 80-98% NOxreduction was possible with SV=2400 h$\^$-1/ and a molar ratio of 1.0-2.0. A SNCR/SCR(SV=6000 h$\^$-1/) combined process has shown same NOx reduction compared with a stand-alone SCR(SV=2400 h$\^$-1/) unit process of 98% NOx reduction. The NH$_3$-based chemical could routinely achieve SNCR/SCR combined process total NOx reductions of 98% with less than 5 ppm NH$_3$ slip at NSR ranging from about 1.5 to 2.0, SNCR temperature of 900$^{\circ}C$-950$^{\circ}C$, and SCR space velocity of 6000 h$\^$-1/. Particularly, more than 98% NOx reduction was possible using the combined process under the conditions of T$\_$SNCR/=950$^{\circ}C$, T$\_$SCR/=350$^{\circ}C$, 5% O$_2$, SV=6000 h$\^$-1/ and NH$_3$/NOx=1.5. A catalyst volume was about three times reduced by SNCR/SCR combined process compared with SCR process under the same controlled conditions.

• 전기의세계
• /
• 제22권2호
• /
• pp.70-74
• /
• 1973

This paper dealt with circuit modeling of SCR and gate turn-off SCR by using complementary symmetrical tansistor circuit, which is modified circuit of input current dependent, current stable negative resitance circuit. Operation of this circuit is estimated and analyzed, with which compared with conventional SCR modeling circuit. Also operation and the design procedures are checked by experiments.

• 전력전자학회논문지
• /
• 제13권5호
• /
• pp.383-390
• /
• 2008

본 논문은 산업현장에서 중요부하에 안정적인 전원공급을 하기 위하여 설치한 Static Transfer Switch (STS)의 사이리스터(SCR)가 평균 2%대의 고장으로 문제가 되고 있어 이를 방지하고자 SCR 양단에 기계적인 접점스위치를 병렬로 연결시키고 SCR은 병렬스위치가 동작 가능한 구간인 $12{\sim}208$[mS] 구간에만 기능을 수행하도록 구성하였다. 또한 두 개의 입력 중 어느 한쪽이 단락 또는 지락 사고가 발생되더라도 다른 한쪽의 경로와 부하에 영향을 주지 않도록, 두 개의 입력이 동시 투입되는 시간을 차단하는 ISC (Ideal State Conditioning Interlock Device) - STS 시스템을 제안하였다. 이 제안으로 년간 0.89회의 전환 동작 시에만 SCR이 역할을 하고 전환시점 이후에는 병렬스위치가 전원공급계통의 역할을 함으로서 SCR의 피로도를 현저히 감소시켜 고장률을 감소시킬 뿐만 아니라 고장이 발생된 경우라도 부하에는 영향을 미치지 않아 중요부하의 전원공급에 대한 신뢰성을 높이는데 기여할 수 있다.

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.16-27
• /
• 2015

The design challenges when attempting to obtain sufficient strength for a deepwater steel catenary riser (SCR) include high stress near the hang-off location, an elevated beam-column buckling load due to the effective compression in the touchdown zone (TDZ), and increased stress and low-cycle fatigue damage in the TDZ. Therefore, a systematic strength analysis is required for the proper design of an SCR. However, deepwater SCR analysis is a new research area. Thus, the objective of this study was to develop an overall analysis procedure for a deepwater SCR. The structural behavior of a deepwater SCR under various environmental loading conditions was investigated, and a sensitivity analysis was conducted with respect to various parameters such as the SCR weight, weight of the internal contents, hang-off angle (HOA), and vertical soil stiffness. Based on a deepwater SCR design example, it was found that the maximum stress of an SCR occurred at a hang-off location under parallel loading direction with respect to the riser plane, except for a wave dominant dynamic survival loading condition. Furthermore, the tensile stress governed the total stress of the SCRs, whereas the bending stress governed the total stress at the TDZ. The weight of the SCR and internal contents affected the maximum stress of the SCR more than the HOA and vertical soil stiffness, because the weight of the SCR, including the internal contents, was directly related to its tensile stress.