• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.5
• /
• pp.35-43
• /
• 2007

Laser welding of metals has been widely used to improve a wear resistance and a corrosion resistance of the industrial parts. The objective of this research works is to investigate the influence of the process parameters, such as the welding for metals with CW Nd:YAG lasers. The bead-on-plate welding tests are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the butt welding, the welding quality of the cut section, stain-stress behavior and the hardness of the welded part are investigated. From the results of the investigation, it has been shown that the optimal welding condition without defects in the vicinity of the welded area and with a good welding quality is 1325W of the laser power, and 1.4m/min of laser welding speed.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.121-126
• /
• 1999

지능망은 소비자 또는 가입자의 다양한 욕구를 신속하고도 효과적으로 제공하며 동시에 새로운 서비스에 대한 수요가 있을 경우에 이에 쉽게 대처할 수 있는 차세대 통신망이다. FEP-BEP 구조를 갖는 (N+1) 형식의 지능망 서비스 시스템에서의 서비스에 대한 부하균형 방법으로 각 SCP-BEP 시스템별로 서비스의 종류에 따라서 부하를 할당하는 방식이 있으며, 이를 국내 통신회사에서 실제로 적용하고 있다. 이러한 방식의 장점은 부하균형을 동적으로 할당할 수 있고, 신규 서비스의 등록이나 기존 서비스의 갱신시에 기존에 제공하던 서비스에 대한 호에 미치는 영향을 최소화 할 수 있다는데 있다. 본 논문에서는 SCP-BEP에 제공하는 서비스별로 할당하는 부하량에 따른 시스템의 성능추이를 시뮬레이션 기법에 의하여 추적하고 그 결과에 대하여 기술한다.

• Journal of Life Science
• /
• v.34 no.1
• /
• pp.18-27
• /
• 2024

Laying hens are known to be able to 'bio-accumulate' the health-promoting ingredients of their diet into eggs. The purpose of this study was to characterize lignan-rich eggs as functional food fed with Schisandra fruit by-product (SCP). Experimental diets were formulated using yellow corn, rice bran, soybean meal, fish meal, meat bone meal, poultry meal, vitamin premix, mineral premix, CaCO₃, and supplemented Schisandra chinensis by-product. This experiment conducted a completely randomized design with 5 treatments for 5 laying hens. Levels of SCP were fed control diet or each formulated diet containing 1%, 3%, 5% and 7% SCP powder. The weight of eggs and the lignan content in white and yolk of egg were investigated every 7 days. Egg production and egg weight were not affected by diet at less than 5% SCP in the diet, but were significantly reduced when the diet was supplemented with a high concentration of 7% SCP after 3 weeks. Yolks and white in eggs were analyzed by using a high performance liquid chromatography (HPLC) to determine the lignans profile. Higher dietary SCP supplementation significantly increased gomisin N and schisandrin C in Acetonitrile (p<0.05). Gomisin N in egg white increased in a concentration-dependent manner, but shisandrin C not detected. These results indicated that the use of SCP powder in layering diets was effective in egg quality and for the production of lignans fortified eggs. In conclusion, dietary supplementation of Schisandra by-product with less than 5% can produce lignans-enrich eggs used as functional foods.

• Journal of the Korea Society for Simulation
• /
• v.11 no.2
• /
• pp.45-53
• /
• 2002

The main idea behind the Intelligent Networks(IN) concept is the separation of switching functionality from the service control, in order to meet various service requirements of subscribers and development of new services in time. In (N+1) type Intelligent Network with FEP-BEP framwork, each SCP-BEP system maintains its own subscibers' database respectively. In this case, DB updating operations at each SCP-BEP should be peformed concurrently such that DB updating method could affect the overall system performance. Moreover, it is not easy to predict the current system capacity to satisfy the future IN subscribers' service needs. In this paper, we discuss how much DB updating method affects the performance trends of (N+1) type Intelligent Network with FEP-BEP system by means of the simulation technique as the number of calls increase. The average turnaround time is used as a system performance measure.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1369-1378
• /
• 2018

The purpose of this study was to investigate the effect of skate skin collagen peptide (SCP) according to its molecular weight (<1,000 Da or >1,000 Da) which was divided using the ultrafilatration method. The 200 mg/kg collagen peptide was administrated to obesity-induced db/db mice for 8 weeks. As the results, in collagen peptide-treated groups, body weight gain was decreased, the plasma and hepatic concentration of reactive oxygen species decreased and oxidative stress was alleviated. In addition, SCP-treated group showed the significant reduction of the protein expressions of nuclear transcription factors($NF-{\kappa}B$), enzymes(COX2, iNOS), and inflammatory cytokine(IL-6) in hepatic tissue, compared with those of the obese control group. There was a slight difference depending on the molecular weight of collagen peptide, but overall it was not significant. Therefore, SCP effectively inhibited the obesity-induced inflammatory response through attenuation of oxidative stress in the liver.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.706-713
• /
• 2004

This paper introduced an alternative method called USCP (Unpenetrated Sand Compaction Pile). In USCP, the toe of the sand pile does not reach to the lower supporting layer. Hence it is possible to reduce the amount of sand required. However, the degree of improvement could not be the same as SCP. Effective soil improvement, nevertheless, might be possible by combining both methods. In this paper, an improved method that cross over both SCP and USCP was discussed. And in order to verify applicability to a clay layer, consolidation behaviors with different conditions were analyzed and compared using FEM(Finite Element Method) based on the elasto-viscosity theory. From the results, it is concluded for the characteristic of settlement of USCP that the lower degree of replacement and the smaller ratio of penetration($H_d/H$), the larger is the settlement of the lower part of the clay layer comparing to the layer with no improvement. It is also concluded that the ratios of allotment of stress (m) calculated from the final settlements with 30% of degree of replacement are $1.8{\sim}3.3$ for $H_d/H=lOO%,\;1.8{\sim}4.0\;for\;H_d/H=75%,\;and\;1.8{\sim}3.8\;for\;H_d/H=50%$. Besides, the ratio of allotment of stress decreased as the degree of replacement decreased.

• The Journal of Korean Society for Radiation Therapy
• /
• v.11 no.1
• /
• pp.28-32
• /
• 1999

Verifying the treatment value(Monitor Unit) unnecessarily involves too many simple and repetitive calculation processes, that is, individual computation process using the data(PDD value, Scp Factor, SSD Factor, Tray Factor) on the data book. We intend to minimize the time required to check the Monitor Unit through computerized calculation. Using $^{\ast}(multiplication)$, /(division), +(sum), if function, among others, which are present in the Excell program, MS office program, the Monitor Unit was obtainable through A/P value, Scp Factor and PDD value, Wedge Factor. From the verification of the computations of Monitor Unit for 60 patients previously treated, we were able to obtain an error rate of ${\pm}0.028MU$. Computerized calculation of the Monitor Unit could save the burden of Technologist.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.25-32
• /
• 2010

In this paper stability about lateral soil movement of bridge abutment constructed on the soft ground, reinforced with the sand compaction pile (SCP) and the preconsolidaton methods, was evaluated by using the centrifuge testing facility which stress conditions in field could be reconstructed in the laboratory. The layouts of model such as ground condition, sand compaction piles and abutment was determined on the basis of similitude law with the reduced scale of 1/200. Construction sequences of installing SCP, preparing reclaimed ground, preconsolidating ground and building the piled bridge abutment were reconstructed during centrifuge modelling and measurements of movement were followed in each sequence. From analyzing the results of measuring movements of the model abutment and the ground, measured lateral movement of model abutment was found to be within the allowable value so that stability of abutment against lateral sliding was secured.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.88-94
• /
• 1999

This study is to investigate the effects of warm deep drawing with steel sheets of SCP3C and SCP1 for improving deep drawability. Experiments were carried out in various working conditions such as forming temperature and lubricantion. The effect of lubricantion and temperature on drawabillity of steel sheets as well as thickness distribution of drawn oil pan were examined and discussed. One step forming at room temperature and uniform distribution of thickness was achieved at optimum formability for lubricantion. The optimum forming temperature was obtained that both the die and the blankholder were heated to 10$0^{\circ}C$ while the punch was cooled by circulating coolant of $0^{\circ}C$.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.6
• /
• pp.425-429
• /
• 2014

This paper proposes a DC-DC Buck-Converter with DT-CMOS (Dynamic Threshold-voltage MOSFET) Switch. The proposed circuit was evaluated and compared with a CMOS switch by both the circuit and device simulations. The DT-CMOS switch reduced the output ripple and the conduction loss through a low on-resistance. Overall, the proposed circuit showed excellent performance efficiency compared to the converter with conventional CMOS switch. The proposed circuit has switching frequency of 1.2MHz, 3.3V input voltage, 2.5V output voltage, and maximum current of 100mA. In addition, this paper proposes a SCP (Short Circuit Protection) circuit to ensure reliability.