• 제목/요약/키워드: SCE-UA method

검색결과 28건 처리시간 0.021초

SCE-UA법을 이용한 수문모형의 매개변수 추정 (Calibrating a Rainfall-Runoff Model Using SCE-UA method)

  • 강민구;박승우;박창언
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 1998년도 학술발표회 발표논문집
    • /
    • pp.359-365
    • /
    • 1998
  • A global optimization method known as the Shuffled Complex Evolution method from the University of Arizona(SCE-UA) was used for calibrating a Tank model. The model was calibrated with error-free synthetic data, and the SCE-UA method was found to effectively search optimal parameters. Historical data from an agricultural watershed was used to calibrate and validate the model parameters. The simulated results were in good agreement with the observed.

  • PDF

전역최적화 기법을 이용한 강우-유출모형의 매개변수 자동보정 (Parameter Calibrations of a Daily Rainfall-Runoff Model Using Global Optimization Methods)

  • 강민구;박승우;임상준;김현준
    • 한국수자원학회논문집
    • /
    • 제35권5호
    • /
    • pp.541-552
    • /
    • 2002
  • 본 연구에서는 전체탐색기법 중 Simplex법의 원리를 이용한 SCE-UA법과 Annealing-Simplex (A-S)법을 일유출량 추정 수문모형인 탱크모형의 매개변수 보정에 적용하여 국부탐색기법인 Downhill Simplex법의 결과와 비교하여 탐색능력을 평가하였다. 오차가 없는 합성자료를 사용한 보정에서 A-S법이 목적함수에 관계없이 전역최적해를 탐색하는 결과를 나타냈으며, SCE-UA법은 ABSERR를 목적함수로 사용할 경우에 전역최적해를 탐색하는 결과를 나타냈으며, 다른 목적함수를 사용하는 경우에는 최적해에 가까운 탐색결과를 나타냈다. Downhill Simplex법은 초기값에 따라 다근 탐색결과를 나타냈으며, 최적해에 가까운 초기값을 사용할 경우 전역 최적해를 탐색하는 결과를 나타냈다. 실측자료를 사용한 보정에서는 A-S법과 SCE-UA법이 목적함수에 관계없이 양호한 결과를 나타냈다. 두 개의 서로 다른 단일 목적함수를 조합하여 만든 목적함수 중 DRMS와 NS의 조합에 의해 만들어진 목적함수인 DN이 다른 목적함수보다 저유량에 비중을 더 둔 예측결과를 나타냈으며, 전체 자료기간에 대해서 양호한 예측결과론 나타냈다.

Comparison of Automatic Calibration for a Tank Model with Optimization Methods and Objective Functions

  • Kang, Min-Goo;Park, Seung-Woo;Park, Chang-Eun
    • 한국농공학회지
    • /
    • 제44권7호
    • /
    • pp.1-13
    • /
    • 2002
  • Two global optimization methods, the SCE-UA method and the Annealing-simplex (A-S) method for calibrating a daily rainfall-runoff model, a Tank model, was compared with that of the Downhill Simplex method. The performance of the four objective functions, DRMS (daily root mean square), HMLE (heteroscedastic maximum likelihood estimator), ABSERR (mean absolute error), and NS (Nash-Sutcliffe measure), was tested and synthetic data and historical data were used. In synthetic data study. 100% success rates for all objective functions were obtained from the A-S method, and the SCE-UA method was also consistently able to obtain good estimates. The downhill simplex method was unable to escape from local optimum, the worst among the methods, and converged to the true values only when the initial guess was close to the true values. In the historical data study, the A-S method and the SCE-UA method showed consistently good results regardless of objective function. An objective function was developed with combination of DRMS and NS, which putted more weight on the low flows.

LH-OAT 민감도 분석과 SCE-UA 최적화 방법을 이용한 SWAT 모형의 자동보정 (Automatic Calibration of SWAT Model Using LH-OAT Sensitivity Analysis and SCE-UA Optimization Method)

  • 이도훈
    • 한국수자원학회논문집
    • /
    • 제39권8호
    • /
    • pp.677-690
    • /
    • 2006
  • 본 연구에서는 LH-OAT (Latin Hypercube Ore factor At a Time) 민감도분석 방법과 SCE-UA (Shuffled Complex Evolution at University of Arizona) 최적화 기법을 적용하여 보청천 유역에서 SWAT모형에 대한 자동보정 방법을 제시하였다. LH-OAT 방법은 전역 민감도분석과 부분 민감도 분석의 장점을 조합하여 가용매개변수 공간에 대하여 효율적으로 매개변수의 민감도 분석이 가능하게 하였다. LH-OAT민감도 분석으로부터 결정된 매개변수의 민감도 등급은 SWAT 모형의 자동보정 과정에서 요구되는 보정대상 매개변수의 선택에 유용하게 적용될 수 있다. SCE-UA 방법을 적용한 SWAT모형의 자동보정 해석결과는 보정자료, 보정매개변수, 통계적 오차의 선택에 따라서 모형의 성능이 좌우되었다. 보정기간과 보정매개변수가 증가함에 따라 검증기간에 대한 RMSE (Root Mean Square Error), NSEF (Nash-Sutcliffe Model Efficiency), RMAE (Relative Mean Absolute Error), NMSE (Normalized Mean Square Error) 등의 모형오차는 감소하였지만, NAE (Normalized Average Error) 및 SDR(Standard Deviation Ratio)은 개선되지 않았다. SWAT모형의 보정에 적용되는 보정자료, 보정매개변수 및 모형평가를 위한 통계적 오차 선택이 해석결과에 미치는 복잡한 영향을 이해하기 위하여 다양한 대표유역을 대상으로 추가적인 연구가 필요하다.

수위관측과 수리학적 하도추적에 의한 하천유량 간접추정 (Stream Discharge Estimation by Hydraulic Channel Routing and Stage Measurement)

  • 이상호;강신욱
    • 한국수자원학회논문집
    • /
    • 제34권5호
    • /
    • pp.543-549
    • /
    • 2001
  • 수리학적 하도추적으로부터 하천유량을 간접추정하였다. 짧은 하천구간의 세 지점 연속수위자료와 하천 단면 자료만을 사용하여 조도계수 추정b과 하천유량 계산이 가능하였다. 유량의 간접추정 과정에서, 상류-하류 경계조건을 수위-수위 조건으로 사용하였다. 미국 미시시피 강의 상류 구간 자료가 사용되었고 수리학적 하도추적에는 DWO-PER (operational dynamic wave model)를 이용하였다. DWOPER 모형에서 수정 Newton-Raphson법에 의한 조도계수 추정과정을 개선하기 위하여 SCE-UA 전역최적화 기법을 적용하였으며, SCE-UA 기법의 결과가 적은 오차를 보였다. 특정 홍수에 대하여 유량을 추정한 결과, 몇 개를 제외한 대부분의 계산유량이 10% 이내의 오차를 보였다.

  • PDF

최적화 기법을 이용한 임하호유역 대표 CN값 추정 (Regionalization of CN values at Imha Watershed with SCE-UA)

  • 전지홍;김태동;최동혁
    • 한국농공학회논문집
    • /
    • 제53권5호
    • /
    • pp.9-16
    • /
    • 2011
  • Curve Numbers (CN) for the combination of land use and hydrologic soil group were regionalized at Imha Watershed using Long-term Hydrologic Impact Assessment (L-THIA) coupled with SCE-UA. The L-THIA was calibrated during 1991-2000 and validated during 2001-2007 using monthly observed direct runoff data. The Nash-Sutcliffe (NS) coefficients for calibration and validation were 0.91 and 0.93, respectively, and showed high model efficiency. Based on the criteria of model calibration, both calibration and validation represented 'very good' fit with observe data. The spatial distribution of direct surface runoff by L-THIA represented runoff from Thiessen pologen at Subi and Sukbo rain gage station much higher than other area due to the combination of poor hydrologic condition (hydrologic soil C and D group) and locality heavy rainfall. As a results of hydrologic condition and treatment for land use type based on calibrated CNs, forest is recommended to be hydrologically modelled dived into deciduous, coniferous, and mixed forest due to the hydrological difference. The CNs for forest and upland showed the poor hydrologic condition. The steep slope of forest and alpine agricultural field make high runoff rate which is the poor hydrologic condition because CN method can not consider field slope. L-THIA linded with SCE-UA could generated a regionalized CNs for land use type with minimized time and effort, and maximized model's accuracy.

온·오프라인 매개변수 보정기법에 따른 강우-유출해석 적용성 평가 (Evaluation on applicability of on/off-line parameter calibration techniques in rainfall-runoff modeling)

  • 이대업;김연수;유완식;이기하
    • 한국수자원학회논문집
    • /
    • 제50권4호
    • /
    • pp.241-252
    • /
    • 2017
  • 본 연구에서는 오프라인 및 온라인 매개변수 자동보정기법을 이용하여 개념적 집중형 수문모형의 매개변수를 보정한 후, 각 보정기법에 따른 강우-유출 해석 결과를 비교 분석하여 기법별 적용성을 평가하였다. 이를 위해 용담댐 상류 천천 유역을 대상으로 9개의 단기 강우사상을 선정하고, 강우-유출 모의를 위한 수문모형으로 저류함수모형을 선택하였다. 또한 저류함수모형의 매개변수 보정을 위한 자동보정기법으로 오프라인 기법으로는 SCE-UA, 온라인 기법으로는 파티클 필터를 선정하여 해석을 수행하였다. 각 기법에 따른 유출 해석결과의 재현성 평가를 위해 관측수문곡선의 평균유량을 근거로 하여 저수부(평균유량 이하)와 고수부(평균유량 초과)로 구분하여 모의결과를 비교 검토하였다. 그 결과, 매 시간 입력자료를 이용하여 매개변수를 실시간으로 업데이트하는 파티클 필터의 경우, 저수부와 고수부에 구분없이 전반적으로 우수한 재현성을 보여주었다. 반면에 SCE-UA의 경우, 대상 사상에 대한 전체기간의 정보를 활용하여 선택된 목적함수 RMSE와 HMLE를 최소로 하는 최적 매개변수를 추정함에 따라 일정규모 이상의 홍수사상에서는 목적함수에 따라 매개변수의 변동성이 나타났으며, 고수부에서는 RMSE, 저수부에서는 HMLE가 비교적 우수한 유출모의 결과를 나타내는 것으로 분석되었다.

강우-유출모형의 매개변수 보정을 위한 최적화 기법의 비교분석 (The Comparative Analysis of Optimization Methods for the Parameter Calibration of Rainfall-Runoff Models)

  • 김선주;지용근;김필식
    • 한국농공학회논문집
    • /
    • 제47권3호
    • /
    • pp.3-13
    • /
    • 2005
  • The conceptual rainfall-runoff models are used to predict complex hydrological effects of a basin. However, to obtain reliable results, there are some difficulties and problems in choosing optimum model, calibrating, and verifying the chosen model suitable for hydrological characteristics of the basin. In this study, Genetic Algorithm and SCE-UA method as global optimization methods were applied to compare the each optimization technique and to analyze the application for the rainfall-runoff models. Modified TANK model that is used to calculate outflow for watershed management and reservoir operation etc. was optimized as a long term rainfall-runoff model. And storage-function model that is used to predict real-time flood using historical data was optimized as a short term rainfall-runoff model. The optimized models were applied to simulate runoff on Pyeongchang-river watershed and Bocheong-stream watershed in 2001 and 2002. In the historical data study, the Genetic Algorithm and the SCE-UA method showed consistently good results considering statistical values compared with observed data.

SCE-UA를 이용한 저류함수모형 최적 매개변수 선정 및 평가 (Determination and Evaluation of Optimal Parameters in Storage Function Method using SCE-UA)

  • 정건희;박희성;성지연;김현준
    • 한국수자원학회논문집
    • /
    • 제45권11호
    • /
    • pp.1169-1186
    • /
    • 2012
  • 저류함수법은 오랜 기간 국내 주요하천의 홍수예보에 활용되어 오고 있다. 그럼에도 불구하고, 매개변수와 유출특성의 관계를 정확히 규명하지 못하고 있어, 저류함수법에 대한 매개변수 최적화 연구들은 유역의 물리적인 특성을 반영하지 못한다는 논쟁이 있다. 이에 본 연구에서는 SCE-UA방법을 이용하여 저류함수법의 매개변수를 최적화하고, 매개변수의 변화에 따라 유출곡선이 달라지는 양상을 분석하였다. 분석대상 유역으로는 남한강 최상류지역인 정선과 영월 소유역을 선정하였으며, 상 하류에 위치한 두 개의 유역을 단계적으로 최적화 하였다. 또한 매개변수와 오차평면과의 관계를 알아보기 위해 등고선도를 그려 매개변수가 달라짐에 따라 유출곡선 오차의 변화를 분석하였다. 본 연구는 최적화를 통해 매개변수의 특정 값을 제안하기보다는 실무에서 초기값으로 활용할 수 있는 매개변수의 가능한 범위를 제안하는데 그 목적이 있으며, 제안된 범위의 평균값을 사용하여 모의가 적절히 됨을 확인하였다. 또한 오차를 최소화하기 위해 무작위로 매개변수의 집합을 결정하기 보다는 유역의 물리적인 특성을 고려하여 가능한 매개변수를 고정하고, 매개변수의 변화가 오차에 미치는 영향을 등고선도를 이용하여 분석함으로서 매개변수가 모형의 결과에 미치는 영향에 대한 직관력을 제공하고자 하였으며, 그 결과가 실무에서 홍수예보 효율 제고에 기여할 수 있을 것으로 판단된다.

SLURP 모형을 이용한 유출수문분석 - 소양강댐 유역을 대상으로 - (Hydrological Analysis in Soyanggang-dam Watershed Using SLURP Model)

  • 임혁진;권형중;장철희;김성준
    • 한국수자원학회논문집
    • /
    • 제37권8호
    • /
    • pp.631-641
    • /
    • 2004
  • 본 연구는 개념적 준분포형 모형인 SLURP 모형의 소양강댐유역의 적용가능성에 대해 다루었다. SLURP모형은 강우의 시공간적 변화를 반영하여 강우-유출을 해석하여 관개계획 및 수자원 관리 효과를 판단할 수 있는 준분포형 모형이다. DEM으로부터 지형분석프로그램인 TOPAZ/SLURPAZ와 연계하여 빠르고 쉽게 지형매개변수와 지형자료를 획득할 수 있다. NOAA/AVHRR 위성영상을 이용하여 월별 NDVI를 산출하였으며, 대상유역 주변의 5개의 기상 관측소를 통해 일별 수문기상자료(이슬점, 일사량, 최대ㆍ최소 대기 기온, 상대습도 등)을 얻었다. DEM NDVI, 수문기상자료를 이용하여 1998년부터 2001년까지 4 개년도의 일별유출량을 모의하였다. 매개변수 최적화를 위하여 민감도 분석 및 SCE-UA 방법을 사용하였으며 대상기간의 Nash-Sutcliffe의 모형효율과 WMO 통계량을 통해 소양강댐 유역의 SLURP모형의 적용성을 검증하였다.