• Elastomers and Composites
• /
• v.42 no.2
• /
• pp.102-106
• /
• 2007

Water swelling behaviors of SBR vulcanizates with different reinforcing systems of carbon black, silica without a coupling agent, and silica containing a coupling agent were studied. Distilled water and 3.5% NaCl solution were used as swelling media. The water swelling ratios in the distilled water were higher than those in the salt solution. The water swelling ratios of the carbon black-filled samples were lower than those of the silica-filled ones. For the silica-filled SBR vulcanizates, the specimens without the silane coupling agent had higher water swelling ratios than those containing it. Water swelling behaviors of SBR composites with different 1,2-unit contents were also compared. The water swelling ratios tended to decrease by increasing the 1,2-unit content.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.4
• /
• pp.431-438
• /
• 2009

The purpose of this study was to evaluate the performances of zero-valent iron (ZVI) combined SBR (Z-SBR) process in decolorization and organic removal of synthetic dye wastewater. The batch test for optimizing the operation parameters of ZVI column showed that the appropriate EBCT was around 11 min and the pH of the dye wastewater was below 7.0. During the step increase of influent color unit from 300 to 1,000cu, about 53 to 79% decolorization efficiency could be achieved in control SBR (C-SBR, without ZVI column), which resulted from destroying azo bond of synthetic dye in anaerobic condition. For the same influent color loading, Z-SBR showed always higher decolorization efficiency than C-SBR with an aid of ZVI reducing power. The TCOD concentration in Z-SBR effluent was 20-30mg/L lower than C-SBR effluent although the TCOD before and after ZVI column was nearly same. It means that breakdown of azo bond by ZVI reducing power could increase biodegradability of synthetic dye wastewater.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.861-867
• /
• 2000

The feasibility of simultaneous phosphorus and nitrogen removal by enhancing anoxic phosphorus uptake was investigated in a sequencing batch reactor (SBR). By introducing an anoxic phase into an anaerobic-aerobic SBR (AO SBR), significant amounts of denitrifying phosphorus accumulating organisms (DPAOs) which can utilize nitrate as electron acceptor could be accumulated in the reactor (anaerobic-aerobic- anoxic-aerobic SBR, $(AO)_2$ SBR). A direct comparison of phosphorus uptake rate under anaerobic and aerobic conditions showed that the fraction of DPAOs in P-removing sludge were increased from 10% in the AO SBR to 64% in $(AO)_2$ SBR. The $(AO)_2$ SBR showed stable phosphorus and nitrogen removal efficiency: average removal efficiencies of TOC, total nitrogen, and phosphorus were 92%, 88%, and 100%. respectively. Results of the $(AO)_2$ SBR operation and batch tests showed that nitrite (up to 10 mg-N/L) was not detrimental to anoxic phosphorus uptake and could serve as good electron acceptor like nitrate.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.705-713
• /
• 2011

This paper deals with the effect of SBR bandwidth on the overall performance of the MPEG USAC. Here, the SBR bandwidth is termed the frequency region covered by the SBR codec, and is specified by the bs_stop_freq, which is one of the SBR bitstream components. The performance of the USACs with 5 different SBR bandwidths are compared in a subjective manner using the MUSHRA test. In the comparison, the bit rate is confined to 14~24kbps and only the LPD unit is selected for the core codec. From the comparison, it is observed that the SBR bandwidth that stretches up to 18KHz or above gives the better performance than the others.

• Journal of Environmental Health Sciences
• /
• v.31 no.4 s.85
• /
• pp.340-348
• /
• 2005

Laboratory scale experiments were conducted to compare the performance of two types of sequencing batch reactor(SBR) systems, anoxic-oxic-anoxic-oxic $((AO)_2)$ SBR and anoxic-oxic-anoxic $(A_2O)$ SBR on the biological nitrogen and phosphorus removal. Also, the profiles of DO and pH in reactors were used to monitor the biological nutrient removal in two SBRs. The break point in the pH and DO curves at the oxic period coincided with the end of nitrifying activity at about 1 h 30 min in oxic phase, and the change in pH appears to be related to nitrate concentration. The TOC removal efficiency in $A_2O$ SBR was higher than that in $(AO)_2$ SBR. The denitrification was completed at the influent period. The 2nd non-aeration and aeration periods were not necessary for the nitrogen and phosphorus removal because of the low influent TOC concentration in this study. The release and uptake of phosphorus in $AO_2$ SBR was much higher than that in $(AO)_2SBR.$ In order to uptake more phosphorus, the 1st aeration period in $A_2O$ SBR should be prolonged.

• Elastomers and Composites
• /
• v.41 no.3
• /
• pp.164-171
• /
• 2006

Stress softening behaviors of SBR vulcanizates reinforced with silica or carbon black were studied. Two types of SBR with different 1,2-unit contents of 18 and 60 wt% were used and three filler systems of carbon black and silica with/without silane coupling agent were employed. Stress softening behaviors of the SBR vulcanizates were varied with the SBR types as well as the filler systems. The silica-filled rubber specimens had higher residual strains than the carbon black-filled ones. The residual strains of silica-filled vulcanizates were remarkably reduced by adding a silane coupling agent. The maximum loads at 50% maximum stretch of the carbon black-filled vulcanizates were lower than those of the silica-filled ones. On the contrary, the maximum loads at 200% maximum stretch of the carbon black-filled vulcanizates were higher than those of the silica-filled ones. The maximum loads of the specimens with the 1,2-unit content of 60 wt% are higher than those with the 1,2-unit content of 18 wt% irrespective of the filler systems.

• Environmental Engineering Research
• /
• v.19 no.4
• /
• pp.395-399
• /
• 2014

Operation characteristics of the sequencing batch reactor (SBR) process with electro-flotation (EF) as a solid liquid separation method (EF-SBR) were investigated. EF-SBR process showed excellent solid-liquid separation performance which enabled to separate biosolids from liquid phase within 30 min and to extend cyclic reaction time. Although influent organic loading rate was increased stepwise from 5 to 15 g COD/day, food to microorganisms (F/M) ratio could be maintained about 0.3 g COD/g VSS/day in EF-SBR because biomass concentration could be easily controlled at desired level by EF. However, it was impossible to increase biomass concentration at the same level in control SBR (C-SBR) process because solid-liquid separation by gravity settling showed a limitation at higher mixed liquor suspended solids (MLSS) concentration with 60 min of settling time. Total chemical oxygen demand (TCOD) removal efficiency of EF-SBR process was not decreased although influent organic loading rate became 3 times higher than initial value. However, it was seriously deteriorated in C-SBR process after increasing the rate over 10 g COD/day, which was accounted for insufficient organic removal by relatively higher food to microorganisms (F/M) ratio as well as biosolids wash-out by a limitation of gravity sedimentation.

• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.149-158
• /
• 1998

SBR latex, polyurethane latex and epoxy latex were separately mixed with polyvinyl acetate emulsion. The various physical properties were examined for the mixtures. Epoxy mixtures gave a transparent film. Both polyurethane and SBR mixtures showed opaque film with high viscosity. In SBR and polyurethane increase in hardness was dependent on the evaporation rate of water, but in epoxy it was dependent on the degrees of crosslink. Epoxy's showed excellent water-resistance. SBR showed a good flexural strength and impact strength. When vinyl acetate emulsion was mixed with less than 10% latex paper tube showed the ductile fracture, but over latex content 20%, it showed the brittle fracture.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.556-562
• /
• 2013

This paper is aimed to improve performance of Band-Selection speech/audio Coder reconstucted band spectrum that is not sent by the comfort noise. To improve the performance, we use the Spectral Band Replication(SBR) technique instead of substitution of Comfort noise. To synthesize SBR signal, the SBR algorithm is referenced in selected signals and the spectrum synthesized by SBR is injected to non-selected band. Each sub-band spectrum has been energy-weighted by real audio signal. We propose the enhanced the Band-Selection Coder that utilizes synthesized SBR signal from selected signal instead of comfort noise.

• Journal of the Korean Vacuum Society
• /
• v.3 no.1
• /
• pp.130-137
• /
• 1994

SbSBr, BiSBr, SbSBr : Co, BiSBr : Co, SbSBr : Ni 및 BiSBr : Ni 단결정을 수직 Bridgman 방법으로 성장시켰다. 성장된 단결정의 구조는 orthorhombic 구조이며 광학적 energy band gap 구조는 간접적이형이었고 energy gap의 온도의존성은 일차 및 이차 상전이점에서 anomalous 한 특성이 나 타 났다. 불순물로 첨가한 cobalt와 nickel은 Td 대칭점에 Co2+ ion, Co3+ ion 및 Ni2+ ion으로 위치하며 이들 ion의 energy 준위간의 전자전이에 의하여 불순물 광흡수 peak들이 나타난다.