• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.5 no.1
• /
• pp.32-37
• /
• 2009

The emergency diesel generator (EDG) in a nuclear power plant (NPP) shall start within 10 secondss and supply electrical power to engineered safety features within one minute and less if a loss of offsite power (LOOP), A design-basis event, or their combination occur. Each NPP has an EDG set consisting of two diesel generators for redundancy. In addition to the EDG set, an alternate Alternating Current Diesel Generator (AAC DG) is installed and shared by several units to cope with a station black out (SBO), i.e., loss of the offsite power concurrent with reactor trip and unavailability of the EDG set. The objective of this study is to analyze the failure data of emergency diesel generators reported in overseas nuclear power plants.

• Journal of Power System Engineering
• /
• v.13 no.1
• /
• pp.53-58
• /
• 2009

The emergency diesel generator(EDG) of the nuclear power plant is designed to supply the power to the nuclear reactor on Station Black Out(SBO) condition. The operation reliability of onsite emergency diesel generator should be ensured by a conditioning monitoring system designed to monitor and analysis the condition of diesel generator. For this purpose, we have developing the technologies of condition monitoring for the wolsong unit 3&4 standby diesel generator including diesel engine performance. In this paper, technologies of condition monitoring for the wolsong standby diesel generator are described about three step. First is for selection of operating parameter for monitoring. Second is for technologies of online condition monitoring, Third is for monitoring of engine performance.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.3
• /
• pp.245-252
• /
• 2014

Engineering applications of global optimization techniques are recently abundant in the literature and it may be caused by both new methodologies arising and faster computers coming out. Many of the optimization techniques are based on natural or biological phenomena. This study put focus on enhancing the performace of Cuckoo Search (CS) among them since it has the least number of parameters to tune. The proposed enhancement can be achieved by applying surrogate-based optimization at every cycle of CS, which fortifies the exploitation capability of the original method. The enhanced algorithm has been applied several engineering design problems with constraints. The proposed method shows comparable or superior performance to the original method.

• Nuclear Engineering and Technology
• /
• v.28 no.3
• /
• pp.247-256
• /
• 1996

This paper presents a new approach for assessing accident management strategies using containment event trees (CETs) developed during an individual plant examination (IPE) for a reference plant (CE type, 950 MWe PWR). Various accident management strategies to reduce risk have been proposed through IPE. Three strategies for the station blackout sequence are used as an example : 1) reactor cavity flooding only, 2) primary system depressurization only, and 3) doing both. These strategies are assumed to be initiated at about the time of core uncovery. The station blackout (SBO) sequence is selected in this paper since it is identified as one of the most threatening sequences to safety of the reference plant. The effectiveness and adverse effects of each accident management strategy are considered synthetically in the CETs. A best estimate assessment for the developed CETs using data obtained from NUREG-1150, other PRA results, and the MAAP code calculations is performed. The strategies are ranked with respect to minimizing the frequencies of Various containment failure modes. The proposed approach is demonstrated to be very flexible in that it can be applied to any kind of accident management strategy for any sequence.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2670-2677
• /
• 2023

In the nuclear safety studies, a new trend refers to the evaluation of uncertainties as a mandatory component of best-estimate safety analysis which is a modern and technically consistent approach being known as BEPU (Best Estimate Plus Uncertainty). The major objectives of this study consist in performing a study of uncertainties/sensitivities of the major analysis results for a generic CANDU 6 Nuclear Power Plant during Station Blackout (SBO) progression to understand and characterize the sources of uncertainties and their effects on the key figure-of-merits (FOMs) predictions in severe accidents (SA). The FOMs of interest are hydrogen mass generation and event timings such as the first fuel channel failure time, beginning of the core disassembly time, core collapse time and calandria vessel failure time. The outcomes of the study, will allow an improvement of capabilities and expertise to perform uncertainty and sensitivity analysis with severe accident codes for CANDU 6 Nuclear Power Plant.

• Korean journal of food and cookery science
• /
• v.15 no.3
• /
• pp.264-271
• /
• 1999

This study was conducted to know the storage stability of Yackwa, a traditional Korean fried cookie, prepared by two different cooking methods; deep fat frying at 160$^{\circ}C$ for 8 min (DFF), and preheating Yackwa dough and then deep fat frying at 180$^{\circ}C$ for 2 min (MW/DFF). Soybean oil (SBO), hydrogenated soybean oil (HSBO) or hydrogenated palm oil (HPO) were used for frying Yackwa. Compared to Yackwa prepared by DFF, all MW/DFF Yackwa samples had low fat content and high moisture content. MW/DFF saved frying time 6 min compared with DFF. Non-hydrogenated soybean oil for frying fats was replaced with hydrogenated types of soybean oil and palm oil to improve the storage stability of Yackwa. To investigate the oxidation stability of Yackwa during the accelerated storage for 15 days at 60$^{\circ}C$, acid value, anisidine value, peroxide value and oxidation value of Yackwas were measured. Acid values of Yackwa made by MW/DFF were higher than those made by DFF through the whole storage periods, regardless of frying fats. Peroxide and anisidine values of Yackwa coated with syrup were much lower than those without syrup. MW/DFF cooking method, using hydrogenated soybean oil or hydrogenated palm oil for frying, showed lowering effects on peroxide value as well as anisidine value, resulting in improved oxidation stability of Yackwa during the storage. In sensory evaluation, the acceptability of MW/DFF Yackwa was higher than those of the commerical products. Yackwa prepared by MW/DFF cooking method using hydrogenated palm oil, showed the highest acceptability in color, taste and texture among the samples.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.5
• /
• pp.710-714
• /
• 2003

This study was carried out to compare the effects of different plant oil sources on lipid metabolism of insulin dependent diabetic mice. Streptozotocin-induced (65 mg/kg B.W.) diabetic mice were fed four kinds of experimental diets with 20% lipid, which composed of 10% lard, and 10% soy bean oil (SBO), 10% rice germ oil (RGO), 10% rice brab oil (RBO) and 10% sesame oil (SSO) respectively, for 7 weeks. Diet intake, body weight, organs weights and lipids levels of serum, liver and feces were measured. There was no significant difference in diet intake and body weight among experimental groups. But the concentrations of serum triglyceride of RGO and RBO groups, and of serum total cholesterol of RGO and SSO groups were lower than those of the others. The hepatic total cholesterol level was the lowest in RGO group. The contents of total lipid and total cholesterol excreted in feces of RGO and RBO groups were higher than those of SBO and SSO groups. These results suggested that rice germ oil can effectively reduce serum triglyceride level and hepatic total cholesterol concentration of insulin dependent diabetic mice than rice bran oil, soy bean oil and sesame oil, and hypolipidemic effect of rice germ oil be due to increasing fecal lipid excretion. But we need to investigate the more detailed factors on lipid reducing effect in rice germ oil and rice bran oil.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1396-1408
• /
• 2020

Filtered containment venting system (FCVS) is one of the severe accident mitigation systems designed to release containment pressurization to maintain its integrity. The thermal-hydraulic behaviors in FCVSs are important since they affect the operation characteristics of the FCVS. In this study, a representative FCVS was modeled by RELAP5/Mod3.3 code, and the Station BlackOut (SBO) was chosen as an accident scenario. The thermal-hydraulic behaviors of an FCVS during long-term operation with two venting strategies (open-and-close strategy, open-and-non-close strategy) and the sensitivity analysis of important parameters were investigated. The results show that the FCVS can operate up to 250 h with a periodic open-and-close strategy during an SBO. Under the combined effects of steam condensation and water evaporation, the solution inventory in the FCVS increases during the venting phase and decreases during the intermission phase, showing a periodic pattern. Under this condition, the appropriate initial water level is 3-4 m; however, it should be adjusted according to the environment temperature. The FCVS can accommodate a decay heat power of 150-260 kW and may need to feed water for a higher decay heat power or drain water for a lower decay heat power during the late phase. The FCVS can function within an opening pressure range from 450 kPa to 500 kPa and a closing pressure range between 250 kPa and 350 kPa. When the open-and-non-close strategy is adopted, the solution inventory increases quickly in the early venting phase due to steam condensation and then decreases gradually due to the evaporation of water; drying-up may occur in the late venting phase. Decreasing the venting pipe diameter and increasing the initial water level can mitigate the evaporation of the scrubbing solution. These results are expected to provide useful references for the design and engineering application of FCVSs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.11
• /
• pp.1559-1563
• /
• 2009

Scaled-up production of oil containing diacylglycerol (DAG), so called diacylglycerol-oil, was produced by lipase-catalyzed reaction. Mixture of soybean oil and glyceryl monooleate with 1:2 molar ratio was esterified with Lipozyme RMIM in a batch-type reactor at 55$^{\circ}C$ and 300 rpm during 6 hr. After short-path distillation for removal of monoacylglycerol and free fatty acid as reaction by-products, diacylglycerol-oil mainly consisted of DAG (29 area%) and TAG (71 area%). The major compositional fatty acids in diacylglycerol-oil were oleic (44.36 wt%), and linoleic acids (37.36 wt%). Acid value and iodine value of diacylglycerol-oil were 0.13 and 112.6, respectively. Solid fat content (SFC) of diacylglycerol-oil was observed after differential scanning calorimetry (DSC) analysis in which three melting peaks at -25.0, 0.1, and 11.2$^{\circ}C$ were shown.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.1926-1938
• /
• 2020

We validated the performance of RELAP MOD3.3 code regarding the hybrid SIT with available experimental data. The concept of the hybrid SIT is to connect the pressurizer to SIT to utilize the water inside SIT in the case of SBO or SB-LOCA combined with TLOFW. We investigated how well RELAP5 code predicts the physical phenomena in terms of the equilibrium time, stratification, condensation against Separate Effect Test (SET) data. We also conducted the validation of RELAP5 code against Integrated Effect Test (IET) experimental data produced by the ATLAS facility. We followed conventional approach for code validation of IET data, which are pre-test and post-test calculation. RELAP5 code shows substantial difference with changing number of nodes. The increase of the number of nodes tends to reduce the condensation rate at the interface between liquid and vapor inside the hybrid SIT. The environmental heat loss also contributes to the large discrepancy between the simulation results of RELAP5 and the experimental data.