• International Journal of Korean Welding Society
• /
• v.1 no.1
• /
• pp.1-6
• /
• 2001

This paper describes several advances in sensor and process control techniques for applications in Submerged Arc Welding (SAW), which combine to give a fully automatic system capable of controlling and adapting the overall welding process. This technology has been applied in longitudinal and spiral pipe mills and in pressure vessel production.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.59-60
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1033-1034
• /
• 2011

• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.05
• /
• pp.98-100
• /
• 1991

A sensitive surface acoustic wave (SAW) sensor for the detection of odorants has been constructed by depositing different phospholipids and fatty acids on the surface of the SAW device wi th the Langmuir-Blodgett technique. The characteristics of SAW device operating at 310 MHz deposited with phosphatidylcholine were analyzed. Amyl acetate, acetoin, menthone and other organic gases showed different affinities. The identification of odorants depending on the species of lipid used for coating is discussed in terms of the similarity of the normalized resonant frequency shift pattern. Using a number of different lipid-coated SAW devices, odorants could be identified by a neural-network pattern recognition with back-propagation algorithm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.12
• /
• pp.979-983
• /
• 2012

We proposed the ZnO thin film for a SAW filter by PLD and RF sputtering method. ZnO thin films was pre-deposited on a sapphire substrate as a seed layer by PLD method and then deposited on seed layer by RF sputtering. The surface characteristics of ZnO thin film were investigated by XRD, SEM and AFM. The minimum surface roughness was 1.92 nm and FWHM of rocking curve was $0.92^{\circ}$. We demonstrated the SAW filter with bandwidth of approximately 0.97 MHz and the center frequency of 18.72 MHz using the proposed ZnO thin film.

• Journal of the Korean Vacuum Society
• /
• v.4 no.4
• /
• pp.413-416
• /
• 1995

고주파 마그네트론 스펏터링법을 이용하여 ZnO막을 제조하고 유리기판 위에 ZnO-SAW필터를 제작하였다. ZnO막의 제조 조건은 고주파 전력 150W, 기판온도 $200^{\circ}C$, 분위기압 5mTorr 및 O2/(Ar+O2)비 50%였다. 한편 IDT(Inter-digital transducer)전극은 전극 폭을 2.56mm, 전극 거리를 2,936mm, λ/8폭을 $8mu$m로 설계하였다. 제작된 ZnO-SAW필터의 주파수 응답을 측정하기 위해 소자는 mount(TO8)에 고정시켰다. ZnO SAW필터의 통과 대역(3 dB대역폭)은 345.2~44.8 MHz로 9.6MHz의 대역 폭을 나타내었으며 중심주 파수는 40 MHz를 나타내었다. 또한 삽입 손실은 39 dB, 통과 대역에서의 리플(ripple)은 $\pm$ 0.8 dB 및 rejection은 17 dB를 나타내었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.319-322
• /
• 2004

본 연구에서는 DNA의 상보적인 결합을 이용하여 DNA 혼성화 반응을 감지할 수 있는 SH형 SAW 센서를 개발하였다. 측정에 사용된 DNA는 15개의 염기를 가진 올리고 뉴클레오티드를 사용하였으며 이에 대해 상보적 결합이 가능한 염기서열을 가진 것과 그렇지 않은 미스매치 형태의 DNA 올리고뉴클레오티드를 이용하여 DNA 혼성화 반응 특성을 측정하였다. SH형 SAW 센서는 압전 단결정 $LiTaO_{3}$를 사용하여 100 MHz 발진되는 형태로 제작하였으며, 센서의 지연선 위에 Ti/Au 층을 증착하여 SH기가 수식된 탐침 DNA의 고정화가 가능하게 하였다. 제작된 센서는 Au가 증착된 박막위에 탐침 DNA를 SAM 방법으로 고정화 시켰을 경우와 고정화된 탐침 DNA와 표적 DNA와의 혼성화 반응을 시키고 난 후의 센서의 주파수 변화를 각각 측정하였다. 개발된 DNA 혼성화 반응 측정용 SH형 SAW센서는 DNA 혼성화 특성에 기인한 질량하중 효과에 따른 안정적인 주파수 변화를 나타내었다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.3
• /
• pp.206-211
• /
• 2011

In this paper, we report a high-precision wireless gap sensor based on a surface acoustic wave (SAW) device. The sensing element is a parallel-plate capacitor whose dimensions are $3{\times}3\;mm^2$, and is attached to the SAW device as an external load. The SAW device, equipped with an RF antenna, serves simultaneously as a signal conditioner and an RF transponder. The center frequency of the SAW device is 450 MHz. The wireless gap sensor prototype exhibits a resolution of 100 nm and a sensing range of $50{\mu}m$. The proposed sensor system can be used for remote, high-precision gap measurement in hard-to-reach environments.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.90-96
• /
• 1997

This paper was concerned with temperature aspect in the smoldering time of the accumulated each saw-dust sample of larch, oregon, aromatic trees which was formed with heaped cone-shape. The smoldering time and temperature of each sample was measured under the wind velocity of 0.10~0.15 m/s and circumstance relative humidity of 60%. As a result, the very lowest heat beginning temperature was detected in aromatic. The effective smoldering phenomena in the sample were detected when the larch saw-dust of [-20+40mesh] and the aromatic saw-dust of [-40+50mesh, -50+60mesh]. Finally the larger a particle size of saw-dust was the better a smoldering time was short. Also, it showed more increasing temperature above $70^{\circ}C$in the smoldering reaction.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.2
• /
• pp.83-90
• /
• 2005

In this paper, we proposed the newly design method for extracting of the saw resonator characteristic. For the parameters of the proposed equivalent model, we adjusted and optimized the variables of several functions. As verification of proposed method, we firstly designed and fabricated cellular saw resonator by using the proposed model resonator. As the simulated and measured results of the proposed design method are almost equaled, we confirmed the usefulness of this method. we knew the usefulness of this method. Finally we designed the 800MHz cellular Tx/Rx band pass filter by using this designed resonator.