• Korean Journal of Remote Sensing
• /
• v.5 no.1
• /
• pp.13-27
• /
• 1989

In recent years satellite data have been increasingly used for the analysis of floodprone areas. This study was carried out to demonstrate the usefulness of repetitive satellite imagery in monitoring flood levels of the Pyungchang watershed. Runoff characteristics parameters were analyzed by Soil Conservation Service(SCS) Runoff Curve Number(RCN) based on Landsat imagery and Digital Terrain Model data. The RCN average within the watershed was calculated from RCN estimates for all the pixels(picture elements) and adjusted by antecedent precipitation conditions. The direct runoff hydrograph was derived from the unit hydrograph using SCS dimensionless unit hydrograph and effective rainfalls estimated by the SCS method. In comparsion of the direct runoff hydrograph with the measured rating curve their peak times differ by one hour and peak discharges differ by 5.9 percents of the discharge from each other. It was shown that repetitive satellite image could be very useful in timely estimating watershed runoffs and evaluating ever-changing surface conditions of a river basin.

• International Journal of Aerospace System Engineering
• /
• v.5 no.2
• /
• pp.8-15
• /
• 2018

For small earth observation satellites, alignment between the optical components is important for precise observation. However, satellite cameras are structurally subject to misalignment in the launch environment where vibration excitations and impacts apply, and in space environments where zero gravity, vacuum, radiant heat and degassing occur. All of these variables can cause misalignment among the optical components. The misalignment among optical components results in degradation of image quality, and a re-alignment process is needed to compensate for the misalignment. This process of re-alignment between optical components is referred to as a refocusing process. In this paper, we proposed a 3 - axis focusing mechanism to perform the refocusing process. This mechanism is attached to the back of the secondary mirror and consists of three piezoelectric inertia-friction actuators to compensate the x-axis, y-axis tilt, and de-space through three-axis motion. The fabricated focus mechanism demonstrated excellent servo performance by experimenting with PD servo control.

• Ocean and Polar Research
• /
• v.44 no.2
• /
• pp.179-190
• /
• 2022

Data missing in optical satellite images caused by natural variations have been a crucial barrier in observing the status of marine surfaces. Although there have been many attempts to fill the gaps of non-observation, there is little research to analyze the ratio of missing grids to overall sea grids and their seasonal patterns. This report introduces the method of quantifying the distribution of missing points and then shows how the missing points have spatial correlation and seasonal trends. Both temporal and spatial integration methods are compared to assess the effectiveness of reducing missing data. The temporal integration shows more outstanding performance than the spatial integration. Moran's I and K-function with statistical hypothesis testing show that missing grids are clustered and there is a non-random distribution from daily integration. The result of the seasonality test for Moran's I through a periodogram shows dependency on full-year, half-year, and quarter-year periods respectively. These analysis results can be used to deduce appropriate integration periods with permissible estimation errors.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_1
• /
• pp.1003-1017
• /
• 2017

Multispectral image data of high spatial resolution is required to obtain correct information on the ground surface. The multispectral image data has lower resolution compared to panchromatic data. PAN-sharpening fusion technique produces the multispectral data with higher resolution of panchromatic image. Recently the object-based approach is more applied to the high spatial resolution data than the conventional pixel-based one. For the object-based image analysis, it is necessary to perform image segmentation that produces the objects of pixel group. Image segmentation can be effectively achieved by the process merging step-by-step two neighboring regions in RAG (Regional Adjacency Graph). In the satellite remote sensing, the operational environment of the satellite sensor causes image degradation during the image acquisition. This degradation increases variation of pixel values in same area, and results in deteriorating the accuracy of image segmentation. An iterative approach that reduces the difference of pixel values in two neighboring pixels of same area is employed to alleviate variation of pixel values in same area. The size of segmented regions is associated with the quality of image segmentation and is decided by a stopping rue in the merging process. In this study, the image restoration and segmentation was quantitatively evaluated using simulation data and was also applied to the three PAN-sharpened multispectral images of high resolution: Dubaisat-2 data of 1m panchromatic resolution from LA, USA and KOMPSAT3 data of 0.7m panchromatic resolution from Daejeon and Chungcheongnam-do in the Korean peninsula. The experimental results imply that the proposed method can improve analytical accuracy in the application of remote sensing high resolution PAN-sharpened multispectral imagery.

• Journal of Internet Computing and Services
• /
• v.21 no.4
• /
• pp.43-49
• /
• 2020

This paper proposes a lossless image compression method based on arithmetic coding using block-adaptive Context Tree Weighting. The CTW method predicts and compresses the input data bit by bit. Also, it can achieve a desirable coding distribution for tree sources with an unknown model and unknown parameters. This paper suggests the method to enhance the compression rate about image data, especially aerial and satellite images that require lossless compression. The value of aerial and satellite images is significant. Also, the size of their images is huger than common images. But, existed methods have difficulties to compress these data. For these reasons, this paper shows the experiment to prove a higher compression rate when using the CTW method with divided images than when using the same method with non-divided images. The experimental results indicate that the proposed method is more effective when compressing the divided images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.63-70
• /
• 2015

An Image fusion, or Pansharpening is a methodology of increasing the spatial resolution of image with low-spatial resolution using high-spatial resolution images. In this paper, we have performed an image fusion of hyperspectral imagery by using panchromatic image with high-spatial resolution, multispectral and hyperspectral images with low-spatial resolution, which had been acquired by ALI and Hyperion of EO-1 satellite sensors. The study has been mainly focused on evaluating performance of fusion process following to the image fusion methodology of the block association, which had applied to ALI and Hyperion dataset by considering spectral characteristics between multispectral and hyperspectral images. The results from experiments have been identified that the proposed algorithm efficiently improved the spatial resolution and minimized spectral distortion comparing with results from a fusion of the only panchromatic and hyperspectral images and the existing block-based fusion method. Through the study in a proposed algorithm, we could concluded in that those applications of airborne hyperspectral sensors and various hyperspectral satellite sensors will be launched at future by enlarge its usages.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.6
• /
• pp.1-12
• /
• 2006

Remote sensing cannot provide a direct measurement of vegetation index (VI) but it can provide a reasonably good estimate of vegetation index, defined as the ratio of satellite bands. The monitoring of vegetation in nearby urban regions is made difficult by the low spatial resolution and temporal resolution image captures. In this study, enhancing spatial resolution method is adapted as to improve a low spatial resolution. Recent studies have successfully estimated normalized difference vegetation index (NDVI) using improved resolution method such as from the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard EOS Terra satellite. Image enhancing spatial resolution is an important tool in remote sensing, as many Earth observation satellites provide both high-resolution and low-resolution multi-spectral images. Examples of enhancement of a MODIS multi-spectral image and a MODIS NDVI image of Cheongju using a Landsat TM high-resolution multi-spectral image are presented. The results are compared with that of the IHS technique is presented for enhancing spatial resolution of multi-spectral bands using a higher resolution data set. To provide a continuous monitoring capability for NDVI, in situ measurements of NDVI from paddy field was carried out in 2004 for comparison with remotely sensed MODIS data. We compare and discuss NDVI estimates from MODIS sensors and in-situ spectroradiometer data over Ochang plain region. These results indicate that the MODIS NDVI is underestimated by approximately 50%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.2
• /
• pp.175-181
• /
• 2011

In remote sensing, it has been a difficult task to obtain a multispectral image with high spatial resolution because of the technical limitation of satellite sensors. In order to solve these problems, various pansharpening algorithms have been tried and proposed. However, most pansharpened images created by various approaches tend to distort the spectral characteristics of the original multispectral image or decrease the visual sharpness of the panchromatic image. To minimize the spectral distortion of pansharpened image while preserving spatial information of the panchromatic image, a hybrid pansharpening algorithm based on the spatial correlation was proposed. In this paper, we analyzed the spatial and spectral distortion of the hybrid pansharpened images generated by the various spatial correlation methods. In the experiments, we proved that the method by using Laplacian filtering was more efficient than other high frequency extraction algorithms in the viewpoint of spectral distortion and spatial sharpness.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.13-16
• /
• 2014

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by fast refreshing images, and we realized the ratio of refresh time by counting between on time and off time for video signal input during 1 frame (16.7ms). Conventional driving signal cannot follow fast on-off speed, so we evaluated new signal generator using SDI (Serial Data Interface) mode signal generator. We realized articulate image generation similar to CRT by high fast full HD (High Definition) signals and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.145-148
• /
• 2012

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold typedisplay mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.