• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.239-243
• /
• 2004

Recently various thematic maps and image maps using aerial photograph and satellite imagery are frequently made. The geo-referencing is essential to make image map and topographic map using aerial photograph and satellite imagery. For this geo-referencing, Ground Control Points (GCPs) are needed. In this paper, we used GPS relative positioning to measure GCP ground coordinate and the accuracy of 8cm level was achieved. We made GCP image chips for the efficiency of geo-referencing and carried out the bundle adjustment of aerial photographs using GCP image chips to acquire the GCP photo coordinate with image matching technique. Finally we analyzed the accuracy of bundle adjustment compared to the accuracy of the case in using digital maps to acquire GCP photo coordinate.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.217-219
• /
• 2010

Sensor modeling is the basic step to extract and to use the information from satellite images. Sensor modeling requires ground control points. If we use a single image, we have limitations on modeling about images captured from regions that we can not approach or take GCPs. In this research, we use strip images to do sensor modeling by two methods. At first, we apply sensor modeiling to single image and apply the results by extrapolation. Next, we consider strip images to single image. As a result, we find the second method is more accurate about whole image.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1464-1466
• /
• 2003

classification of the satellite images provides information about land cover and/or land use. Quality of the classification result depends mainly on the spatial and spectral resolutions of the images. In this study, image fusion in terms of resolution merging, and band integration with multi-source of the satellite images; Landsat ETM+ and Ikonos were carried out to improve classification. Resolution merging and band integration could generate imagery of high resolution with more spectral bands. Precise image co-registration is required to remove geometric distortion between different sources of images. Combination of unsupervised and supervised classification of the fused imagery was implemented to improve classification. 3D display of the results was possible by combining DEM with the classification result so that interpretability could be improved.

• 대한공간정보학회지
• /
• 제21권2호
• /
• pp.93-98
• /
• 2013

다중 시기에 수집된 고해상도 위성영상은 효과적인 도심지 분석과 모니터링을 위한 필수적인 자료이다. 그러나 같은 지역에 대해 다른 센서에서 수집된 영상은 물론, 동일 센서 영상이라 하더라도 두 영상간의 기하학적 위치정보가 서로 일치하지 않는 문제가 존재한다. 따라서 다중 영상의 효과적인 활용을 위해서는 영상 정합을 위해 매칭 포인트를 추출하는 일이 필수적이다. 그러나 도심지의 경우 건물, 교량, 나무, 기타 인공 구조물 등의 영향으로 넓은 영역에 그림자가 분포하며 그림자의 방향과 강도는 영상 수집 시기에 따라 달라지기 때문에 정확한 매칭 포인트를 추출하는데 어려움이 있다. 본 연구에서는 대표적인 매칭점 추출 기법인 SIFT(Scale-Invariant Feature Transform) 기법과 자동 그림자 추출 기법을 적용하여 도심지역의 그림자가 영상 정합에 미치는 영향을 분석하였다. 영상 분할을 통해 생성된 세그먼트의 분광 및 공간인자를 이용하여 그림자 객체를 추출하였으며 이 때 건물 버퍼 영역을 그림자의 인접정보로서 활용하였다. SIFT 기법을 통해 추출된 매칭점이 그림자에 위치하는 경우 이를 제거하고 영상 정합을 수행하였다. 최종적으로 고해상도 위성영상의 정합에 대한 그림자의 영향을 분석하기 위해 추출된 매칭점과 정합 결과의 정확도를 정량적, 시각적으로 평가하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.502-504
• /
• 2003

The main objective of this study is to examine the effectiveness of newly available high spatial resolution satellite images, in evaluating vegetation environment of the urban areas. In doing so, we have used satellite images from QuickBird and selected some areas of Fukuoka City, Kyushu Japan, as study area. The results of the study revealed that, high resolution images are more effective in close monitoring of the vegetation status and green plants should be planted in open spaces and roofs of urban areas to increase vegetation, which will in turn act as a remedy to reduce heat island phenomenon.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.25-30
• /
• 1999

This paper covers the development of a highly portable and low cost SPOT image data receiving system. We followed two design approaches. One is the software-based approach by which most of the real-time processing is handled by software. With the complete software-based design, it is simple to add a function for receiving any additional satellite data. Satellite-specific format handlers including error correction, decompression and decryption can easily be accommodated. On the other approach. we used a general hardware platform, IBM-PC and a low cost SCSI RAID (Redundant Away of Independent Disks), and therefore, we can make a low cost system.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.616-619
• /
• 2005

CALNAL team of Korea Aerospace Research Institute(KARI) performed field campaigns for absolute radiometric calibration of 1m satellite image on Daejeon and the cal/val site of Goheung. The satellite image have spatial resolution of 1m in panchromatic spectral band of 450-900nm. The performed cal/val method is the reflectance-based of vicarious calibration methods. We collected ground-based and meteology data such as temperature, surface pressure and reflectance of targets, and radiosonde data used only to test in Goheung. Data collected on each field served as input to radiative transfer codes to generate a top-of-atmosphere(TOA) radiance estimate. Derived TOA is compared with DN of overpass satellite to calculate calibration coefficient of gain and offset.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.760-763
• /
• 2006

In this paper, a small portion of coastline on the EAST SEA was studied using CORONA panoramic satellite photo and 1:5000 Korean National Topographic Map. The project site near Kangneung city was 3 Km shoreline on the Kangmoon Beach and the SongJeong Beach, which have suffered from severe erosion. The first and the most important step was to rectify a CORONA image over the project site. A rigid mathematical model and a heuristic polynomial transformation were used for the purpose. The rectified image was overlaid with 1:5000 Korean National Topographic Map produced by aerial mapping. Among numerous methods for shoreline erosion measurement, area-based approach was chosen and used for the computation for annual shoreline recession. The final result of the analysis was that the average recession in the period of 1963-1998 was 33.6m and the annual rate was 0.96m.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.860-863
• /
• 2006

Epipolar images have to be generated to stereo display aerial images or satellite images. Pushbroom sensor is used to acquire high resolution satellite images. These satellite images have curvilinear epipolar lines unlike the epipolar lines of frame images, which are straight lines. The aforementioned fact makes it difficult to generate epipolar images for pushbroom satellite images. If we assume a linear transition of the sensor having constant speed and attitude during image acquisition, we can generate epipolar images based on parallel projection model (2D Affine model). Recent high resolution images are provided with RPC values so that we can exploit these values to generate epipolar images without using ground control points and tie point. This paper provides a procedure based on the parallel projection model for generating epipolar images directly from a stereo IKONOS images, and experimental results.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.208-211
• /
• 2008

Band-limited filtering will be applied to remove interference resulted from two neighbored channels in the transmission of KOMPSAT-5 X-Band image data. In that case, receiver in ground station should prepare righteous matched filter to avoid huge BER degradation depending on the matched filter of COTS receiver. As an effort to simulate the bandlimited filtering, test filter was designed and manufactured on the basis of main specification for output filter of KOMPSAT-5 satellite. Consequently, 1.8dB of BER degradation was measured at the output of test band-pass filter, but the degradation was downsized up to 0.4dB thanks to the adaptive matched filter of COTS receiver.