• Clean Technology
• /
• v.13 no.3
• /
• pp.180-187
• /
• 2007

The indium tin oxide(ITO) film on PET was prepared by a wet coating method to obtain the transparent film with a high conductance. ITO nano-particles was synthesized by a SAS method at 15 MPa and $50^{\circ}C$, where optimized rate of In/Sn was 65. Average diameter and resistivity of ITO obtained from SAS are $15{\pm}2\;nm$ and $4{\times}10^4\;{\Omega}{\cdot}cm$. Coating solution was prepared at pH 10. The ITO film was obtained by solution including 0.1 0.5, 1, and 2 ITO wt% on PET. Roughness(Ra) of ITO film with 0.1, 0.5, 1. and 2 ITO wt% is 4, 10, 12, and 16 nm. Resistivity with an increasing ITO concentration is $3.7{\times}10^6,\;2.4{\times}10^6,\;8{\times}10^5,\;and\;2{\times}10^5\;{\Omega}{\cdot}cm$. Transmissivity of ITO film decreased as 89, 88, 86, and 82% with an increasing ITO concentration as 0.1, 0.5, 1, and 2 wt%.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.37-44
• /
• 2008

The multi-layer PET film of ITO/ATO was prepared by a wet coating method to obtain the transparent film with a high conductance at low cost. ITO nano-particles were synthesized by a SAS method at 15 MPa and $50^{\circ}C$, where optimized rate of In/Sn was 65. Average diameter and resistivity of ITO obtained from SAS are $15{\pm}2nm$ and $4{\times}10^4{\Omega}{\cdot}cm$. Coating solution was prepared at pH 10. Roughness (Ra), resistivity, and transmissivity of ATO film on PET are 9 nm, $5.5{\times}10^6{\Omega}{\cdot}cm$, and 91%. The multi-layered film of ITO/ATO was obtained by solution including 0.1, 0.5, 1.0, and 2.0 ITO wt% on ATO layer. Roughness (Ra) of multi-layered film with 0.1, 0.5, 1.0, and 2.0 ITO wt% is 4, 10, 12, and 16 nm, respectively. Corresponding resistivity with an increasing ITO concentration is $3.7{\times}10^6$, $2.4{\times}10^6$, $8{\times}10^5$, and $2{\times}10^5{\Omega}{\cdot}cm$. Transmissivity of ITO/ATO film decreases as 89, 88, 86, and 82% with an increasing ITO concentration as 0.1, 0.5, 1.0, and 2.0 wt%.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.4
• /
• pp.329-338
• /
• 2022

This paper provides a case study of development testing and evaluation of design goal of Interferometric SAS (Synthetic Aperture Sonar) system that is developing supported by Civil-Military Technology Cooperation Center in offshore fields. For Deep water operating capabilities evaluation, We have surveyed candidate field, bathymetric mapping and target identification over 200 m depth, East Sea. In testing phase, We have provided environmental information of testing field include water column, seabed and weather condition in real time. And to compare excellency of developing InSAS, we have gather commercial imaging sonar system data with same target. This case study will support the Test Readiness Review of future underwater surveillance system developing via investigate marine testing field environment, testing facilities and planning.

• Journal of Life Science
• /
• v.11 no.3
• /
• pp.197-202
• /
• 2001

This study was conducted to investigate the effect of simulated acid solution(SAS) on acid buffering capacity, chlorophyll content and butrient leacking in 4 herb species(Petunia hybrida Vilm, Gomphrena globosa L. Celosia cristat L. Salvia officinallis L) . The acid buffering capacity in the leves was increased in the treatment of pH 3.0 in Celosia L., whereas it was increased at pH 4.0 in Petunia Petunia hybrida Vilm. and Gomprean globosa L.. But, the acid buffering capacity of the leaves did not work at ph 2.0 treatment in 4 herb species. With decreasing pH level, the chlorophyll content of Petunia hybrida Vilm. and Gomphrena globosa L. Was markedly decreased than that of Gelosia cristata L. and Savia officinalis L. As the pH levels decreased from 5.6 to 2.0 the nutrient leaching from leaves was significantly increased in 4 herb species. In pH 4.0 and 5.6, the concentrations of nutrient leaching from leaves were higher in Perunia hybrida Vilm. and Gomphrean globosa L. than Gelosia cristata L. and Salvia officinalis L., Based on the results, there was a great differences in response to SAS among the 4 herb species. Im general, Gelosia cristata L. and Salvia officinalis L. represented a higher tolerance to SAS Petunia hybrida Vilm, and Gomphrena globosa L..

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.13-18
• /
• 2009

Because the existing Human-Machine Interface (HMI) for the conventional substation cannot dynamically indicate the configuration information of the Substation Automation System (SAS). In this paper, an intelligent station HMI is proposed for IEC 61850 based substation. The program of the proposed HMI not only can automatically generate the layout of single line diagram, but can also indicate the communication network and functions of IEDs by reading SCL files. It greatly helps monitor the operation status, communication network and each IED dynamically, such as failure detection in SAS. Furthermore, this paper presents the possibility of developing new software for SAS with the full use of IEC 61850-6. Once the software is complete, there is no need to change it when the substation is upgraded or when it is migrated to other IEC 61850 based substations, which is a cost-effective solution.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.3930-3943
• /
• 2021

To improve the capability of the SAS4A code, which simulates the initiating phase of core disruptive accidents for MOX-fueled Sodium-cooled Fast Reactors (SFRs), the authors have investigated in detail the physical phenomena under unprotected loss-of-flow (ULOF) conditions in a previous paper (Kawada and Suzuki, 2020) [1]. As the conclusion of the last article, fuel stub motion, in which the residual fuel pellets would move toward the core central region after fuel pin disruption, was identified as one of the key phenomena to be appropriately simulated for the initiating phase of ULOF. In the present paper, based on the analysis of the experimental data, the behaviors related to the stub motion were evaluated and quantified by the author from scratch. A simple model describing fuel stub motion, which was not modeled in the previous SAS4A code, was newly proposed. The applicability of the proposed model was validated through a series of analyses for the CABRI experiments, by which the stub motion would be represented with reasonable conservativeness for the reactivity evaluation of disrupted core.

• Composites Research
• /
• v.17 no.6
• /
• pp.22-27
• /
• 2004

The objective of this work is to design Surface Antenna Structure (SAS) and investigate fatigue behavior of SAS that is asymmetric sandwich structure. This term, SAS, indicates that structural surface becomes antenna. Constituent materials are selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, SSSFIP elements inserted into structural layers were designed fur satellite communication at a resonant frequency of 12.5 GHz and final demonstration article was $16{\;}{\tiems}{\;}8$ array antenna. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue life curve of SAS was obtained. The fatigue load was determined experimentally at a 0.75 (1.875kN) load level, Experimental results were compared with single load level fatigue life prediction equations (SFLPE) and in good agreement with SFLPE. SAS concept is the first serious attempt at integration fur both antenna and composite engineers and promises innovative future communication technology.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.170-180
• /
• 2016

Objectives: While the proportion of the non-regular workers youth increases in labor market, the differential conditions of temporary employee are increased. Methods: Research objects were 4,322 youth (from 15 to 29) among members of workers who responded to 2014 PSWCI panel report. Statistical analyses were performed using the SAS version 9.4 (SAS Institute Inc., Cary, NC, USA). Data were analyzed using frequency test, t-test, ANOVA and multiple regression. Results: According to results of analysis, youth had differences in youth temporary workers, working conditions, classification of occupation, working period, and health conditions based on work-time conditions. Conclusions: Youth workers, policies on working hours will need to take steps toward reducing working hours and improve a health promoting hierarchy for work environment.

• KSBB Journal
• /
• v.19 no.4
• /
• pp.321-326
• /
• 2004

Microparticles of an inclusion complex between itraconazole and 2-hydroxypropyl-${\beta}$-cyclodextrin (HP-${\beta}$-CD) were prepared using an environmentally-benign supercritical anti-solvent (SAS) process. In order to evaluate the degree of complexation, the thermal behavior of solid micro particulate complexes was investigated using differential scanning calorimetry. The experimental results obatined for the solubility and dissolution rate of the microparticulate inclusion complexes in a buffer solution of pH 1.2 showed that the complexation of itraconazole with HP-${\beta}$-CD results in a significant increase in the solubility and dissolution rate of itraconazole. For the microparticulate itraconazole/Hp-${\beta}$-CD inclusion complexes prepared by the SAS process, about 80% of itraconazole was found to dissolve in the buffer solution. Our experimental results confirmed that the SAS process is a promising method for the preparation of microparticles of water-insoluble drug/cyclodextrin inclusion complexes.

• Asian Oncology Nursing
• /
• v.1 no.2
• /
• pp.168-179
• /
• 2001

Spirituality has been found as a factor that may influence an individual's health and response to illness and dying. The purpose of this study was to assess the reliability and validity of the Korean version of the Howden's Spiritual Assessment Scale(SAS). The SAS was developed based on the attributes of spirituality and constructed with 28 items, 4 subscales. The translation involved four steps : translation into Korean, checking agreement, back translation into English, and arriving at a consensus. Psychometric evaluation was done on 222 nurses from five hospitals. All responses were voluntary and anonymous. The Cronbach's alpa coefficient for internal consistency was .928 for the total 28 items and .700${\sim}$.805 for subdimensions. Item- total correlations ranged from .36${\sim}$.68. Principal Component Factor Analysis with Varimax Rotation yielded four factors with four or more items each loading at .40 or higher. These factors explained 51.3% of the total variance. The items clustered in this study were almost identical with initial scale. There was positive correlation(r=.648, p=.0001) between SAS and Ellison & Paloutzian's Spiritual Wellbeing Scale and negative correlation(r=-.418, p=.000) with Pines' Burnout Scale which indicate convergent and discriminant validity. In conclusion, this tool can be effectively utilized for assessing spirituality in Korea.