• Structural Engineering and Mechanics
• /
• v.73 no.3
• /
• pp.259-269
• /
• 2020

In this paper, bending-stretching analysis of thick functionally graded piezoelectric rectangular plates is studied using the higher-order shear and normal deformable plate theory. On the basis of this theory, Legendre polynomials are used for approximating the components of displacement field. Also, the effects of both normal and shear deformations are encountered in the theory. The governing equations are derived using the principle of virtual work and variational approach. It is assumed that plate is made of piezoelectric materials with functionally graded distribution of material properties. Hence, exponential function is used to modify mechanical and electrical properties through the thickness of the plate. Finally, the effect of material properties, electrical boundary conditions and dimensions are investigated on the static response of plate. Also, it is shown that results of the presented model are close to the three dimensional elasticity solutions.

• Geomechanics and Engineering
• /
• v.11 no.2
• /
• pp.289-307
• /
• 2016

A simple hyperbolic shear deformation theory taking into account transverse shear deformation effects is proposed for the free flexural vibration analysis of thick functionally graded plates resting on elastic foundations. By considering further supposition, the present formulation introduces only four unknowns and its governing equations are therefore reduced. Hamilton's principle is employed to obtain equations of motion and Navier-type analytical solutions for simply-supported plates are compared with the available solutions in literature to check the accuracy of the proposed theory. Numerical results are computed to examine the effects of the power-law index and side-to-thickness ratio on the natural frequencies.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.69-79
• /
• 2014

The scheduling scheme in packet switching networks is one of the most critical features that can affect the performance of the network. Hence, many scheduling algorithms have been suggested and some indices, such as fairness and latency, have been proposed for the comparison of their performances. While the nature of Internet traffic is bursty, traditional scheduling algorithms try to smooth the traffic and serve the users based on this smoothed traffic. As a result, the fairness index mainly considers this smoothed traffic and the service rate as the main parameter to differentiate among different sessions or flows. This work uses burstiness as a differentiating factor to evaluate scheduling algorithms proposed in the literature. To achieve this goal, a new index that evaluates the performance of a scheduler with bursty traffic is introduced. Additionally, this paper introduces a new scheduler that not only uses arrival rates but also considers burstiness parameters in its scheduling algorithms.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.187-189
• /
• 2005

The asset management system for power distribution is necessary to make efficient use of distribution asset and to devise optimum investment plans. So we developed KDAMS(Korea Distribution Asset Management System) that is adopting reliability indexs, SAIFI and SAIDI, and operator's experiences. This paper presents functions of the system that is reliability management, failure rate management, establishment of optimum investment plan and so on. And it presents the of used algorithms to develop this system.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.4
• /
• pp.521-526
• /
• 2009

In this paper we are interested in the control of Doubly Fed Induction Machine (DFIM) using the Passivity Based Control (PBC). This work presents a solution to the problem of DFIM that requires a state observer. The proposed method shows very important advantages for nonlinear systems, especially in the trajectory tracking to achieve the needed DFIM performance. In the obtained results, the passivity provides high efficiency in DFIM based system, namely in its stability and robustness. An improvement behavior has been observed in comparison to the results given by the RST controller.

• Steel and Composite Structures
• /
• v.15 no.2
• /
• pp.221-245
• /
• 2013

This paper presents an analytical solution to the thermomechanical bending analysis of functionally graded sandwich plates by using a new hyperbolic shear deformation theory in which the stretching effect is included. The modulus of elasticity of plates is assumed to vary according to a power law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. The effects of functionally graded material (FGM) layer thickness, volume fraction index, layer thickness ratio, thickness ratio and aspect ratio on the deflections and stresses of functionally graded sandwich plates are investigated.

• Structural Engineering and Mechanics
• /
• v.62 no.6
• /
• pp.675-693
• /
• 2017

In this paper, based on the first-order shear deformation plate theory, buckling analysis of piezoelectric coupled transversely isotropic rectangular plates is investigated. By assuming the transverse distribution of electric potential to be a combination of a parabolic and a linear function of thickness coordinate, the equilibrium equations for buckling analysis of plate with surface bonded piezoelectric layers are established. The Maxwell's equation and all boundary conditions including the conditions on the top and bottom surfaces of the plate for closed and open circuited are satisfied. The analytical solution is obtained for Levy type of boundary conditions. The accurate buckling load of laminated plate is presented for both open and closed circuit conditions. From the numerical results it is found that, the critical buckling load for open circuit is more than that of closed circuit in all boundary and loading conditions. Furthermore, the critical buckling loads and the buckling mode number increase by increasing the thickness of piezoelectric layers for both open and closed circuit conditions.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.311-321
• /
• 2014

This paper focuses on contention-based medium access control (MAC) protocols used in wireless local area networks. We propose a novel MAC protocol called adaptive backoff tuning MAC (ABTMAC) based on IEEE 802.11 distributed coordination function (DCF). In our proposed MAC protocol, we utilize a fixed transmission attempt rate and each node dynamically adjusts its backoff window size considering the current network status. We determined the appropriate transmission attempt rate for both cases where the request-to-send/clear-to-send mechanism was and was not employed. Robustness against performance degradation caused by the difference between desired and actual values of the attempt rate parameter is considered when setting it. The performance of the protocol is evaluated analytically and through simulations. These results indicate that a wireless network utilizing ABTMAC performs better than one using IEEE 802.11 DCF.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.9
• /
• pp.1073-1080
• /
• 1999

Optimal routing of distribution networks can be attained by keeping the line power capacity limit to handle load requirements, acceptable voltage at customer loads, and the reliability indices such as SAIFI, SAIDI, CAIDI, and ASAI limits. This method is composed of optimal loss reduction and optimal reliability cost reduction. The former is solved relating to the conductor resistance of all alternative routes, and the latter is solved relating to the failure rate and duration of each alternative route. The routing considering optimal loss only and both optimal loss and optimal reliability cost are compared in this paper. The case studies with 10 and 24 bus distribution networks showed that reliability cost should be considered as well as loss reduction to achieve the optimal routing in the distribution networks.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4176-4178
• /
• 2011

The reaction of (chlorocarbonyl)phenyl ketene, with readily available benzhydroxamic acid derivatives, such as benzhydroxamic acid, 4-chlorobenzhydroxamic acid, 3-nitrobenzhydroxamic acid, 4-methylbenzhydroxamic acid, N-hydroxy-3-oxo-3-phenylpropionamide, N-hydroxy-2-phenylacetamide, affords isoxazolone derivatives in high yields in a one step procedure. The formation of the products proceeds by a mechanism, that involves replacement of chlorine of the ketene, by benzhydroxamic acids, followed by rapid ring closure of this intermediate to form isoxazolone derivatives.