• 대한수학회보
• /
• 제57권5호
• /
• pp.1215-1229
• /
• 2020

Let D be an integral domain and S a multiplicative subset of D. An ascending chain (I_k)_k∈ℕ of ideals of D is said to be S-stationary if there exist a positive integer n and an s ∈ S such that for each k ≥ n, sI_k ⊆ I_n. As a generalization of domains satisfying ACCP (resp., ACC on ∗-ideals) we define D to satisfy S-ACCP (resp., S-ACC on ∗-ideals) if every ascending chain of principal ideals (resp., ∗-ideals) of D is S-stationary. One of main results of this paper is the Hilbert basis theorem for an integral domain satisfying S-ACCP. Also we investigate the class of such domains D and we generalize some known related results in the literature. Finally some illustrative examples regarding the introduced concepts are given.

• 대한인간공학회지
• /
• 제10권1호
• /
• pp.29-40
• /
• 1991

This study deals with a quantitative analysis of the effects of colors on learning effectiveness. First, sensuous or emotional factors that school children feel about colors of teachers' clothes are measured by SD method and analyzed by factor analysis. Second, sensuous or emotional factors to enhance learning effectiveness are measured by SD method from teachers, and principal factors are extracted by factor analysis. Finally, the analysis of interaction between the effects of colors and the learning effectiveness is done using the sensuous or emotional factors found from the previous two analyses. The results are as follows: (1) For in-class concentration, the principal factors are "stable", and "near" feelings. The colors related to these feelings are black, red, and blue. (2) For question inducing, the first principal factors are "soft" and "stable" feelings, and the colors are white and black. The second principal factors are "gentle" and "refined" feelings, and the colors are orange and black. (3) For extra-curricular activity, the principal factors are "artless" and "plain" feelings, and the color is blue.

• 한국농공학회지
• /
• 제38권6호
• /
• pp.64-73
• /
• 1996

The three-dimensional strength behavior of compacted decomposed granite soil was studied using cubical triaxial tests with independent control of the three principal stresses. All specimens were loaded under conditions of principal stress direction fixed and aligned with the directions of compacted plane. For comparable test conditions, the major principal strain and volume strain to failure were smallest when the major principal stress acted perpendicular to the compacted plane. The opposite extremes were obtained when the major principal stress acted parallel to the compacted plane. In cubical triaxial tests with same b values and with ${\theta}$ values in one of three sectors of the octahedral plane, independent of the range of ${\theta}$, higher friction angles are obtained in tests with b greater than in triaxial compression tests in which b 0.0, Comparison between the results of the drained cubical triaxial tests on lksan compacted decomposed granite soil and the cross section of the Mohr-Coulomb failure surface as well as the cross section of the Mohr-Coulomb failure surface were made. Lade's isotropic failure criterion based on vertical specimens overestimates the strengths for tests performed with values of 0 between 90˚ and 1 50˚ the Mohr-Coulomb criterion generally underestimates the strengths of tests performed with values of ${\theta}$ between $0^{\circ}$ and $180^{\circ}$ except around the $120^{\circ}$.

• 한국의료질향상학회지
• /
• 제15권1호
• /
• pp.123-133
• /
• 2009

Background : The principal diagnosis has been used in many different fields such as hospital statistics, medical research, insurance claim, national health statistics and so on. Some principal diagnoses have a relatively low level of reliability in the medium-sized hospitals. The purpose of this study is to identify the reliability level of principal diagnoses and to suggest ways to improve reliability of the principal diagnosis. Method : Data were collected from a medium-sized hospital located in Pusan. The discharge summaries on 323 patients who were discharged in January, 2008 and the outpatient summaries on 251 patients who visited the hospital on March 28, 2008 were collected, and descriptive analysis was performed using SPSS version 12.0K. Result : The findings are the followings: (1) the diagnostic consistency rate between medical records and doctors' was 92.0%; (2) the diagnostic consistency rate between medical records and insurance claims was 86.1%; (3) the diagnostic consistency rate between doctors' diagnoses and insurance claims was 80.2%. The evidence seems to indicate that some principal diagnoses have reliability problems in the medium-sized hospitals. Conclusion : The results of this study suggest the followings: (1) employees should be trained and supervision of hospital activities are needed; (2) network systems should be constructed for each department; (3) professions need to be fostered (4) doctors' awareness of medical records should be changed.

• 터널과지하공간
• /
• 제6권2호
• /
• pp.101-121
• /
• 1996

The thermomechanical characteristics of rocks such as temperature dependency of strength and deformation were experimentally investigated using Iksan granite, Cheonan tonalite and Chung-ju dolomite for proper design and stability analysis of underground structures subjected to temperature changes. For the temperature below critical threshold temperature $T_c$, the variation of uniaxial compressive strength, Young's modulus, Brazilian tensile strength and cohesion with temperature were slightly different for each rock type, but these mechanical properties decreased at the temperatures above $T_c$ by the effect of thermal cracking. Tensile strength was most affected by $T_c$, and uniaxial compressive strength was least affected by $T_c$. To the temperature of 20$0^{\circ}C$ with the confining prressure to 150 kg/$\textrm{cm}^2$, failure limit on principal stress plane and failure envelope on $\sigma$-$\tau$ plane of Iksan granite were continuously lowered with increasing temperature but those of Cheonan tonalite and Chung-ju dolomite showed different characteristics depending on minor principal stress on principal stress plane and normal stress on $\sigma$-$\tau$ plane. The reason for this appeared to be the effect of rock characteristics and confining pressure. Young's modulus was also temperature and pressure dependent, but the variation of Young's modulus was about 10%, which was small compared to the variation of compressive strength. In general, Young's modulus increased with increasing confining pressure and increased or decreased with increasing temperature to 20$0^{\circ}C$ depending on the rock type.

• 응용통계연구
• /
• 제30권5호
• /
• pp.747-757
• /
• 2017

본 논문은 다변량 실현 변동성 계산에서 주기 선택 방안에 대해 연구하고 있다. 고빈도(high frequency) 시계열 자료에 기초한 일간 변동성인 실현변동성을 계산하고 차원 축소 방법인 주성분을 도입하였다. Cholesky 모형을 포함한 다양한 다변량 변동성모형을 주성분을 통해 비교하였으며 KOSPI/삼성전자/현대차 고빈도 수익률 자료를 이용하여 예시하였다.

• 대기
• /
• 제22권2호
• /
• pp.149-161
• /
• 2012

Going by the research results of the past, of all the uncertainties resulting from the research on climate change, the uncertainty caused by the climate change scenario has the highest degree of uncertainty. Therefore, depending upon what kind of climate change scenario one adopts, the projection of the water resources in the future will differ significantly. As a matter of principle, it is highly recommended to utilize all the GCM scenarios offered by the IPCC. However, this could be considered to be an impractical alternative if a decision has to be made at an action officer's level. Hence, as an alternative, it is deemed necessary to select several scenarios so as to express the possible number of cases to the maximum extent possible. The objective standards in selecting the climate change scenarios have not been properly established and the scenarios have been selected, either at random or subject to the researcher's discretion. In this research, a new scenario selection process, in which it is possible to have the effect of having utilized all the possible scenarios, with using only a few principal scenarios and maintaining some of the uncertainties, has been suggested. In this research, the use of cluster analysis and the selection of a representative scenario in each cluster have efficiently reduced the number of climate change scenarios. In the cluster analysis method, the K-means clustering method, which takes advantage of the statistical features of scenarios has been employed; in the selection of a representative scenario in each cluster, the selection method was analyzed and reviewed and the PDF method was used to select the best scenarios with the closest simulation accuracy and the principal scenarios that is suggested by this research. In the selection of the best scenarios, it has been shown that the GCM scenario which demonstrated high level of simulation accuracy in the past need not necessarily demonstrate the similarly high level of simulation accuracy in the future and various GCM scenarios were selected for the principal scenarios. Secondly, the "Maximum entropy" which can quantify the uncertainties of the climate change scenario has been used to both quantify and compare the uncertainties associated with all the scenarios, best scenarios and the principal scenarios. Comparison has shown that the principal scenarios do maintain and are able to better explain the uncertainties of all the scenarios than the best scenarios. Therefore, through the scenario selection process, it has been proven that the principal scenarios have the effect of having utilized all the scenarios and retaining the uncertainties associated with the climate change to the maximum extent possible, while reducing the number of scenarios at the same time. Lastly, the climate change scenario most suitable for the climate on the Korean peninsula has been suggested. Through the scenario selection process, of all the scenarios found in the 4th IPCC report, principal climate change scenarios, which are suitable for the Korean peninsula and maintain most of the uncertainties, have been suggested. Therefore, it is assessed that the use of the scenario most suitable for the future projection of water resources on the Korean peninsula will be able to provide the projection of the water resources management that maintains more than 70~80% level of uncertainties of all the scenarios.

• Journal of Forest and Environmental Science
• /
• 제37권1호
• /
• pp.35-43
• /
• 2021

The interspecific hybrid of Salix caprea and Salix gracilistyla has never been identified or studied in Korea. Accordingly, this study investigated the flower morphological characteristics of the interspecific hybrid between S. caprea and S. gracilistyla and compared the interspecific hybrid with S. caprea and S. gracilistyla, respectively. The female flowers were investigated for 12 characteristics and the male flowers were investigated for nine. For the female flowers, those of the hybrids were larger than those of S. caprea and S. gracilistyla in terms of catkin length (CL), bract length (BL), and bract width (BW). The hybrids are intermediates between S. caprea and S. gracilistyla in terms of ovary length, width, and stipitate length as well as gland length (GL). For the male flowers, those of the hybrids were bigger than those of S. caprea and S. gracilistyla in terms of CL, BL, and BW. The hybrids are intermediates between S. caprea and S. gracilistyla in terms of catkin width and stamen length (SL). A principal component analysis (PCA) of the female data showed that the first principal component (PC) explained 57.5% of the total variation. The first PC highly correlated the ovary stipitate and pistil style lengths. The analysis was divided into three groups of S. caprea, S. gracilistyla, and the hybrid by the first PC. The results of a PCA of the male data showed that the first PC explained 35.7% of the total variation. The first PC highly correlated with the adelphous SL and was divided into three groups of S. caprea, S. gracilistyla, and the hybrid. The results of the discriminant analysis showed that S. caprea, S. gracilistyla, and the hybrid were distinguishable by flower morphological characteristics. Therefore, the hybrid was distinctly separated from S. caprea and S. gracilistyla by flower characteristics.

• 응용통계연구
• /
• 제22권3호
• /
• pp.531-539
• /
• 2009

로지스틱회귀분석은 고객관계관리를 위한 데이터마이닝 분야에서 많이 사용되는 기법인데, 이 분야의 모형설정 과정에서는 연관성이 매우 높은 설명변수들이 모형에 함께 포함되어 다중공선성의 문제를 유발하며, 더욱이 회귀자료에 이상점들이 포함되면 최우추정량은 심각한 결함을 갖게 된다. 두 가지 문제점을 동시에 해결하기 위하여 로버스트주성분로지스틱회귀를 적용할 수 있는데, 본 논문에서는 주성분의 선정기준을 결정하는 모형을 개발하고, 주성분모형에서의 추정치에 미치는 이상점의 영향을 축소하기 위한 로버스트추정법을 제안하였다. 제안된 추정법은 다중공선성과 이상점이 유발하는 문제들을 적절히 해결해 준다는 사실이 모의실험을 통하여 확인되었다.

• 기술혁신학회지
• /
• 제13권2호
• /
• pp.231-251
• /
• 2010

과학기술 R&D 활동의 대표적 성과인 SCI 논문과 특허의 생산에 영향을 미치는 요인은 연구비, 연구원수, 지식스톡(R&D스톡, 논문스톡, 특허스톡 등), 연구환경, 개방화 정도, 인적자본, GDP 등 다양하다. 일반적인 회귀모형을 이용하여 논문 또는 특허의 생산에 영향을 미치는 요인을 추정하면 생산요인들 간에 다중공선성 문제가 발생하여 추정의 오류가 발생한다. 본 논문에서는 과학기술 지식생산에 영향을 미치는 요인들 간의 다중공선성 문제를 해결하기 위해 주성분 회귀모형을 이용하였다. SCI 논문을 산출로 가정한 과학생산성과와 특허를 산출로 가정한 기술생산성과에 영향을 미치는 요인을 회귀모형과 주성분 회귀모형을 이용하여 3가지 사례를 대상으로 비교 분석하였다. 일반 회귀모형을 이용하여 SCI 논문과 특허의 생산에 영향을 미치는 요인들을 분석한 결과, 요인들간에 다중공선성이 매우 높게 나타났고, 그 결과 회귀계수와 추정과 검정에 오류가 발생되었다. 반면 주성분 회귀모형을 이용하여 분석한 결과 다중공선성문제가 해결되어, 개별 생산요인에 대한 효과를 적절하게 추정할 수 있었다. 본 논문에서 제안한 주성분 회귀모형을 이용한 과학기술 지식생산함수 추정방법은 다중공선성이 강한 소수의 생산요소를 포함한 회귀분석에서 유용하게 적용될 수 있을 것이다.