• Title/Summary/Keyword: S-R Variation

Search Result 947, Processing Time 0.037 seconds

Regional variation in vertebral bone density and structure due to osteoporosis (골다공증에 따른 부위별 골 밀도와 구조의 변화)

  • Park, J.H.;Lee, S.J.;Chang, H.;Choi, W.S.;Kang, C.;Tack, G.R.
    • Proceedings of the KOSOMBE Conference
    • /
    • v.1998 no.11
    • /
    • pp.169-170
    • /
    • 1998
  • In this study, regional variation in vertebral bone density due to osteoporosis were investigated using a method that employs images from QCT. QCT images(1mm thick slices) of the first lumbar vertebra from a normal person (23/M, BMD=139.8mg/ml) and from an osteoporotic patient (54/F, BMD=82.0mg/ml) were obtained. Uniform settings (140kVp, 204mA) were used and images of 300 Hounsfield Unit or greater were selectied to filler out soft tissue interference. To assess the regional variation of the area fraction the vertebral body was divided into 3 layers and each layer contained 9 regions. Area faction was calculated based on image analysis data. Our results showed that the area fraction at the middle of the vertebra was quite lower than the endplate and peripheral regions, but the area fraction values from the osteoporotic patient were uniform throughout the entire height of the vertebral body, which indicates the significant drop of BMD had occurred near both end-plates due to the osteoporosis, especially at the peripheral regions. Our results suggest the susceptability of the vertebrae to compression fracture types in osteoporotic spine.

  • PDF

COMPARISONS OF MTSAT-1R INFRARED CHANNEL MEASUREMENTS WITH MODIS/TERRA

  • Han, Hyo-Jin;Sohn, Byung-Ju;Park, Hye-Suk
    • Proceedings of the KSRS Conference
    • /
    • v.2
    • /
    • pp.651-654
    • /
    • 2006
  • Infrared channels of newly launched Japanese geostationary satellite, MTSAT-1R are compared with well calibrated MODIS/Terra infrared measurements at 3.7, 6.7, 11, 12 ${\mu}m$ bands. There are four steps in this intercalibration method: 1) data collection, 2) spectral response function correction, 3) data collocation, and 4) calculation of mean bias and conversion coefficients. In order to minimize the navigation error of MTSAT-1R, comparisons are made over the area in which the viewing angle of MTSAT-1R is less than 50$^{\circ}$. The calibration method was tested for August 2005 and within the 40$^{\circ}N$-40$^{\circ}S$, 100$^{\circ}$E-180$^{\circ}$E domain. The differences of spectral response functions were corrected through radiative transfer model simulation. Constructing collocated data differences in viewing geometry, observation time and space were taken into account. In order to avoid the radiance variation induced by cloud presence, clear-sky targets are selected as intercalibration target. The mean biases of 11, 12, 6.7, and 3.7 ${\mu}m$ bands are about -0.16, 0.36, 1.31, and -6.69 K, suggesting that accuracies of 3.7 ${\mu}m$ is questionable while other channels are comparable to MODIS

  • PDF

Substituent Effects on the Gas-Phase Pyrolyses of 2-Substituted Ethyl N,N-Dialkylcarbamates: A Theoretical Study

  • Kim, Chang-Kon;Kim, Dong-Jin;Zhang, Hui;Hsieh, Yih-huang;Lee, Bon-Su;Lee, Hai-Whang;Kim, Chan-Kyung
    • Bulletin of the Korean Chemical Society
    • /
    • v.28 no.6
    • /
    • pp.1031-1034
    • /
    • 2007
  • The R- and Z-substituent effects for the gas-phase thermal decompositions of carbamates, R2NC(=O)- OCH2CH2Z, have been investigated theoretically at B3LYP level with 6-31G(d) and 6-31++G(d,p) basis sets. Both the Z- and R-substituent effects on reactivity (ΔH≠) were well consistent with experimental results, although the R-substituent effect was underestimated theoretically. No correlations were found between activation enthalpies and reaction enthalpies. The substituent effects on reactivity seemed to be complicated at a glance, but were understandable by concurrent electronic and steric factors. Variations of bond lengths at TS structures were well correlated with the Taft's σ* values and the TS structures became tighter as the Zsubstituent became a stronger electron-acceptor (δσ* > 0). However the effects of R-substituents on the TS structures were much smaller when compared to those of Z-substituents.

The Phylogenetic Relationship of Several Oscillatorian Cyanobacteria, Forming Blooms at Daecheong Reservoirs, Based on Partial 16S rRNA Gene Sequences

  • Lee, Wook-Jae;Bae, Kyung-Sook
    • Journal of Microbiology and Biotechnology
    • /
    • v.11 no.3
    • /
    • pp.504-507
    • /
    • 2001
  • The partial 16S gene sequences of six filamentous cyanobacterial strains, Oscillatoria lmosa KCTC AG10168, Oscillatoria princeps KCTC AG10153, Oscillatoria sp. KCTC AG 10184, Phormidium tenue KCTC AG10158, Phormidium parchydematicum KCTC AG10164, and Lyngbya hieronymusii KCTC AG10199, which were isolated in the late summer at Daecheong Reservoirs, were determined and assigned their phylogenetic and taxonomic position among taxa of order Ocillatoriales whose partial 16S rRNA gene sequences aligned in this suty, were very heterogeneously clustered with other taxa. The two strains, Oscillatoria limosa KCTC AG10168 and O. princeps KCTC AG10153, formed a cluster with O. sancta PCC7515, which supported 64% of the bootstrap trees with high similarity (19-96.15%). Strain Oscillatoria sp. KCTC AG10184, that was known to produce a nasty substance, was closely related to the toxic Oscillatoria group. The study on morphological variation in various environments and toxin production will confirm the taxonomic status of these species. Phormidium tenus KCTC AG10158 and Phormidium parchydematicum KCTC AG10164 made a cluster with other oscillatorian species of Phormidium, Oscillatoria, and Leptolynbya, which supproted 100% of the bootstrap trees with a very high sequence smilarity (96.8-99.8%) in thsi study. The sequence analysis in this study also supported that taxa of oscillatoriales are not monophyletic. Some of the fractures, such as the presence or absence of sheath and cell shape, which were used to define them, would be inadequate and should be reconfirmed. We suggest that sequences of partial 16S rRNA gene fragments aligned in this study should be more useful than morphological features in the identification and reconfirmation of the taxonomic status of these oscillactorian cyanobacteria.

  • PDF

Relationship between Winter Water Temperature in the Eastern Part of the Yellow Sea and Siberian High Pressure and Arctic Oscillation

  • Jung, Hae Kun;Lee, Chung Il
    • Journal of Environmental Science International
    • /
    • v.21 no.12
    • /
    • pp.1425-1433
    • /
    • 2012
  • Water temperature in the eastern part of the Yellow Sea (EYS) during winter (JFM) and summer (JJA) from 1964 to 2009 and Siberian High Pressure Index (SHI) and Arctic Oscillation index (AOI) during winter (JFM) from 1950 to 2011 were used to analyze long-term variation in oceanic and atmospheric conditions and relationship between winter and summer bottom water temperature. Winter water temperature at 0, 30 and 50 m had fluctuated highly till the late of 1980s, but after this it was relatively stable. The long-term trends in winter water temperature at both depths were separated with cold regime and warm regime on the basis of the late 1980s. Winter water temperature at 0m and 50m during warm regime increased about $0.9^{\circ}C$ and $1.1^{\circ}C$ respectively compared to that during cold regime. Fluctuation pattern in winter water temperature matched well with SHI and AOI The SHI had negative correlation with water temperature at 0 m (r=-0.51) and 50 m (r=-0.58). On the other hand, the AO had positive correlation with Winter water temperature at 0 m (r=0.34) and 50 m (r=0.45). Cyclic fluctuation pattern of winter water temperature had a relation with SHI and AO, in particular two to six-year periodicity were dominant from the early of the 1970s to the early of the 1980s. Before the late of 1980s, change pattern in winter water temperature at 0 and 50 m was similar with that in the bottom water temperature during summer, but after this, relationship between two variables was low.

Phylogenetic Analysis of Caterpillar Fungi by Comparing ITS 1-5.8S-ITS 2 Ribosomal DNA Sequences

  • Park, Joung-Eon;Kim, Gi-Young;Park, Hyung-Sik;Nam, Byung-Hyouk;An, Won-Gun;Cha, Jae-Ho;Lee, Tae-Ho;Lee, Jae-Dong
    • Mycobiology
    • /
    • v.29 no.3
    • /
    • pp.121-131
    • /
    • 2001
  • This study was carried out to identify the phylogenetic relationships among several caterpillar fungi by comparing the sequences of internal transcribed spacer regions(ITS1 and ITS2) and 5.8S ribosomal DNA(rDNA) repeat unit. The sequences of ITS1, ITS2, and the 5.8S rDNA from 10 strains of Cordyceps species, 12 strains of Paecilomyces, 3 strains of Beauveria, 2 strains of Metarhizium and 1 strains of Hirsutella were amplified, determined and compared with the previously known Cordyceps species. The sequences of 5.8S rDNA were more conserved in length and variation than those of ITS regions. Although the variable ITS sequences were often ambiguously aligned, the conserved sites could be found. In the phylogenetic tree, the species generally divided into three clusters, supported by their morphology and/or host ranges. The 5.8S rDNA and TTS1 sequences among 10 species of Cordyceps militaris were identical and only one base pair in ITS2 sequence was different. Cordyceps sinensis and Cordyceps ophioglossoides were also clearly different, although they belonged to the same cluster. The Geniank database search of species revealed sister taxa of an entomogenous fungus. Metarhizium was used as an putgroup in all taxa.

  • PDF

Community Structure, Diversity, and Vertical Distribution of Archaea Revealed by 16S rRNA Gene Analysis in the Deep Sea Sediment of the Ulleung Basin, East Sea (16S rRNA 유전자 분석방법을 이용한 동해 울릉분지 심해 퇴적물 내 고세균 군집 구조 및 다양성의 수직분포 특성연구)

  • Kim, Bo-Bae;Cho, Hye-Youn;Hyun, Jung-Ho
    • Ocean and Polar Research
    • /
    • v.32 no.3
    • /
    • pp.309-319
    • /
    • 2010
  • To assess community structure and diversity of archaea, a clone sequencing analysis based on an archaeal 16S rRNA gene was conducted at three sediment depths of the continental slope and Ulleung Basin in the East Sea. A total of 311 and 342 clones were sequenced at the slope and basin sites, respectively. Marine Group I, which is known as the ammonia oxidizers, appeared to predominate in the surface sediment of both sites (97.3% at slope, 88.5% at basin). In the anoxic subsurface sediment of the slope and basin, the predominant archaeal group differed noticeably. Marine Benthic Group B dominated in the subsurface sediment of the slope. Marine Benthic Group D and Miscellaneous Crenarchaeotal Group were the second largest archaeal group at 8-9 cm and 18-19 cm depth, respectively. Marine Benthic Group C of Crenarchaeota occupied the highest proportion by accounting for more than 60% of total clones in the subsurface sediments of the basin site. While archaeal groups that use metal oxide as an electron acceptor were relatively more abundant at the basin sites with manganese (Mn) oxide-enriched surface sediment, archaeal groups related to the sulfur cycle were more abundant in the sulfidogenic sediments of the slope. Overall results indicate that archaeal communities in the Ulleung Basin show clear spatial variation with depth and sites according to geochemical properties the sediment. Archaeal communities also seem to play a significant role in the biogeochemical carbon (C), nitrogen (N), sulfur (S), and metal cycles at each site.

Numerical analysis of flow field around an automobile with variation of yaw angles (측풍의 편향각 변화에 따른 자동차 주위의 유동해석)

  • Kang D. M.;Jung Y. R.;Park W. G.;Ha S. D.
    • Journal of computational fluids engineering
    • /
    • v.4 no.3
    • /
    • pp.1-11
    • /
    • 1999
  • This paper describes the flow field analysis of an automobile with crosswind effects of 15°, 30° 45° and 60° of yaw angles. The governing equations of the 3-D incompressible Navier-Stokes equations are solved by the iterative time marching scheme. The Chimera grid technique has been applied to efficiently simulate the flow around the side-view mirror. The computated surface pressure coefficients have been compared with experimental results and a good agreement has been achieved. The A- and C-pillar vortex and other flow phenomena around the ground vehicle are evidently shown. The variation of aerodynamic coefficients of drag, lift, side force and moments with respect to yaw angle is systematically studied.

  • PDF

A Study on the Internal Structure of the Mandibular First Premolar using the Finite Element Analysis (유한요소해석을 이용한 하악 제1소구치의 내부구조 연구)

  • Lee H.J.;Chun K.J.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2006.05a
    • /
    • pp.171-172
    • /
    • 2006
  • Most existing studies for stress analysis of teeth have employed small number of teeth, and used big element size using F-E models. Therefore, the results are not accuracy enough for showing the internal stress variation. 15 males' and 13 females' mandibular first premolar are employed for internal structure's study of teeth and small element size for a FE model are used. According to these processes, stress distribution of internal parts of teeth are well shown, and the stresses are varied a lot between enamel layer and dentine layer, but there is little variation on pulp chamber.

  • PDF

A Study on Dielectric Properties of Polycarbonate Film Due to Variation of Degradation Time (열화 시간 변화에 따른 폴리카보네이트 필름의 유전 특성에 관한 연구)

  • Lee, Sung Ill
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.31 no.7
    • /
    • pp.469-474
    • /
    • 2018
  • In this study, the capacity and FTIR of polycarbonate film that was degraded for 2, 4, and 8 h in a thermostat at $180^{\circ}C$ was measured. The results of this study are as follows. It was found that the capacity decreased with increasing degradation time and frequency. This findings suggest that the attraction between molecules and amorphous polycarbonate increased because it contains the ketone group (-C=O-) and the chain of dioxides group (-O-R-O-). Measurement by FTIR found that the time of thermal degradation has a smaller impact because the transmutation or variation of the material does not occur. Measurement by SEM magnified 1,000 times found that a longer thermal degradation time results in thermal decomposition of the specimen's particles.