• 수산해양기술연구
• /
• 제22권4호
• /
• pp.61-70
• /
• 1986

In accordance with a rapid growth of demani on aquatic animals, researches of the unused fishery resources On the deep sea b~d in the Korean Waters has been and will be required. The authors carried out a series of fishing experiments to investigate the available resources and to find the effective fishing method on the deep sea bed of the Korean East Sea. In the experiments, 19 kinds of traps which are different from each other in shape, mesh size and entrance diameter were used. The fishing experiments w~r;; carried out in four areas of 20Dm, 600.'11, 800m and 1000.'11 deep respectively, by the Pusan 402 (30:) GT) and the Pusan 403 (279GT), the training ships of National Fisheries University of Pusan, during August, 1986. The catc~ were analyzed with the size, the depth and the construction of traps. The results obtained can be summarized as follows: 1. Main species of the catch w~re pink shrimp, Pandalus bolelis, a kind of welks, Buccimum striatissimum and a kind of larg~ crabs. Chiono8cetes japonicus and the another species were few. 2. The CPUE value (expressed by the number of catch per trap in this paper) of pink shrimp was the highest in the depth of 20J-n around, and the value in the depth of 600.'11 or more decreased gradually with an increase of the depth. But, the value of Buccimum straitissimum was much higher in the depth of 6:J:)!1I or more than that in the depth of 200m around. On the other hand, the value of Chion:Jecetes japonjcus was very low in general. 3. The iniividual body size of the catch differed with the depth. Pink shrimps caught in the depth of 200m around were smaller than those in the depth of 600.'11 or more. In contrast with this, Baccimum striatissim:t.m caught in the depth of 200m around were larger than those in the depth of 600.'11 or more. 4. Depending on the selection curve in Ishida's method for the mesh size of trap webbing, the carapace length of pink shrimp and the shell length of Buccimum striatissimum which are equivalent to 100% relative catching efficiency can be estimated about 3.5cm and 6.5cm or so respectively. 5. The number of catch of pink shrimp and Buccimum striatissimum by the 60.'1'1.'11 entrance diameter of trap were less than that by the 90mm, 120mm and 150mm, even thogh the diffierence am~r, g 9:Jmm, 120.'11.'11 and 150:1'.'11 are not so large.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3442-3447
• /
• 2014

본 논문에서는 간단한 플라스틱전자패키지의 폴리머 흡습특성 평가 방법을 제시하였다. 흡습팽창에 의한 변형을 측정하고 유한요소법으로 해석하였다. 흡습특성 평가를 위해 시편제작을 제작하고, 흡습시간에 따라 폴리머에 내재된 수분질량을 측정하여, 수치해석 결과와 비교분석하였다. 흡습확산 방정식은 열전달 방정식과 유사한 형태를 가지고 있기 때문에 열전달 해석 절차에 따라 상용 유한요소코드를 적용하여 흡습압력비를 구하고, 자체코드로 흡습질량을 계산하였다. 비전도성 폴리머는 동일 제품이라도 생산시기에 따라 흡습특성에 변화가 있었다. 여러 가지 흡습특성에 대해 흡습질량을 수치해석으로부터 계산하고 측정치에 가장 근접한 흡습질량 변화의 그래프를 선택하여 최적의 확산계수와 용해도를 구하였다. 제시된 방법은 빠른 대응을 요구하는 생산현장에서 반도체 패키지 폴리머의 흡습특성을 신속하게 평가하는 데 적용될 수 있을 것이다. 또한 흡습팽창을 모아레 간섭계로 측정하고 수치해석으로 비교하였다. 결과적으로 흡습질량의 측정값과 수치해석 결과를 비교하여 용해도와 확산계수는 0.0320 [g/mm/N]과 0.243 [$mm^2/{\mu}s$]으로 결정하였고, ANSYS 구조해석에 의한 변형은 모아레 간섭에 의한 측정결과와 매우 유사하였다.

• 한국수소및신에너지학회논문집
• /
• 제16권2호
• /
• pp.122-129
• /
• 2005

The characteristics of hydrogen storage have been investigated in the Ti-Cr-Mo and Ti-Cr-V ternary alloys with bcc structure. The alloys were melted by arc furnace and remelted 4-5 times for homogeneity. The lattice parameters, microstructures and phases of the alloys were examined by SEM, EDX and XRD, and the Pressure-Composition isotherms of the alloys were measured. From these data the relationship of the maximum and effective hydrogen storage capacities vs. chemical composition, lattice parameter and the radius of tetrahedral site were analyzed and discussed. The results showed that all of these alloy, in the range of the this study, had mainly bcc solid solutions with small amount of Ti segregation due to a lower melting point of Ti compared with other elements. Lattice parameters of the alloys were very near to the atomic average values of lattice parameters of the constituent elements. It was also found that maximum hydrogen storage capacities of the Ti-Cr-Mo alloys increased with increasing Ti content and the radius of tetrahedral site but the effective hydrogen storage capacities decreased after showing the maximum. The hydrogen storage capacities of the Ti-Cr-V alloys were almost same even though the V contens were quite different from alloy to alloy and this could be attributed to the almost same Ti/Cr ratio of the alloys. The maximum effective hydrogen storage capacity of the Ti-Cr-Mo alloys was revealed at Ti content of about 40${\sim}$50 at% and radius of tetrahedral site of 0.43${\sim}$0.45 nm. The Ti-Cr-V alloys showed the hydrogen storage capacities of 3.0 wt% and effective hydrogen storage capacities of 1.5 wt%.

• 대한기계학회논문집A
• /
• 제41권5호
• /
• pp.375-380
• /
• 2017

본 논문은 한국원자력연구원에서 개발 중인 소듐냉각 고속로 핵연료의 연료봉 하단 마개에 있는 관통구멍과 마운팅 레일의 원기둥 형상과의 접촉부에 발생하는 접촉 손상을 예측하기 위한 가속시험 방법을 연구한 것이다. 가속시험 조건으로서 연료봉의 유체유발진동수 및 진폭을 유한요소 해석을 통하여 구하였다. 약 35000 시간의 연료봉 수명기간을 고려한 가속시험 시간을 결정하기 위해 일반 기계부품류의 신뢰성 평가 방법을 적용하였으며, 이때 가장 보수적인 형상 모수와 원자로 내에서의 연료봉 파손허용 개수 기준 및 연료봉 피복관 재료인 HT-9강의 피로수명 데이터를 이용하였다. 시편의 개수를 5개로 하였을 때, 최종적으로 계산된 가속 시험시간은 각 시편 당 16.5시간이었다. 가속시험 후 전체 시편에 어떠한 접촉손상도 관찰되지 않을 때 연료봉의 수명기간 중 $B_{0.004}$ 수명이 신뢰수준 99%로 보장되는 것으로 평가하였다.

• 한국화재소방학회논문지
• /
• 제15권1호
• /
• pp.84-92
• /
• 2001

현대 사회에 있어서 인구 과밀화와 더불어 대도시의 사회기반시설(SOC)증가에 따른 화학물질 사용시설의 중대사고의 경향이 높아져 가고 있다. 기존 위해·위험시설의 안전사고의 문제점과 더불어 신규 위해·위험시설물의 증가에 따른 안전사고의 심각성을 낮추기 위해 필요한 노력을 하지 않으면 안된다. 선진국에서는 산업시설 그리고 지역사회의 전문위원회가 잠재적인 위해 산업의 사고에 대한 off site 및 on site의 피해 심각성에 대한 평가와 이에 대한 적절한 조언 및 대책을 강구하고 있다. 따라서 본 연구에서는 국내의 위해·위험시설에 대한 안전도 수용기준 성립을 위하여 첫째, 영국 HSE(Heath & Safety Executive)의 QRA(Quantified Risk Assessment)와 Matrix of Risk of Evaluated Sources of Hazard를 적용한 사회적 위험성 평가 방법과 둘째, FTA(Fault Tree Analysis) 또는 ETA(Event Tree Analysis) 등 정량적인 사고 발생 확률과 시뮬레이션 및 계산식을 통해 국내 임의의 지역에 대하여(서울시 위해·위험시설)사고 피해 정도의 개인적 위험성을 평가, 적용함으로서 기존 시설 또는 신설 부지 개발을 위한 제한시 포괄적 안전도 수용기준(수용가능성) 여부를 판별하고자 한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권8호
• /
• pp.1193-1198
• /
• 2003

An increase in frequency of administration of exogenous growth hormone (GH) or GH-releasing hormone was reported to be a model to increase blood circulating insulin-like growth factor-1 (IGF-1) and to improve growth performance in animals. We have investigated the effect of twice daily administration of GH-releasing peptide-2 (GHRP-2) on growth performance, GH responsiveness and plasma insulin-like growth factor IGF-1 in swine. We administered to eight swine, 3 control and 5 treatment, a twice daily s.c. injections of GHRP-2 ($30{\mu}g/kg\;BW$) for a period of 10 days. Every day blood samples immediately taken before injections of GHRP-2 or saline, at 08:00 h and 16:00 h, were measured for IGF-1 concentrations. Blood samples for GH assay were collected every 20 min on days 1, 6 and 10, from 1 hour before and 3 h after GHRP-2 or saline injections at 08:00 h. GH peak concentrations and GH area under curve (GH AUC) on day 1, 6 and 10 in treatment group of swine were higher than those in control swine (p<0.05). Twice daily administration of GHRP-2 caused a significantly attenuation (p<0.05) of GH peak concentrations ($80.25{\pm}13.87$, $39.73{\pm}5.72$ and $27.57{\pm}6.06ng/ml$ for day 1, 6 and 10, respectively) and GH AUCs ($3,536.15{\pm}738.35$, $1,310.31{\pm}203.55$ and $934.37{\pm}208.99ng/ml$ for day 1, 6 and 10, respectively). However, there was no significant difference in GH peak concentration and GH AUC between day 6 and 10. Plasma IGF-1 concentration levels were higher in treatment than control group of swine (p<0.05) after 3 days of the treatment, and the levels reached a plateau from day 3 to 10 of experiment. Growth performance did not alter by GHRP-2 administration, even though a numerical increase of body weight gain and feed efficiency was observed. These results indicate that twice daily administration of GHRP-2 for 10 days in swine did not significantly influence on growth performance, caused an overall attenuation of GH response, and that elevation of plasma GH concentrations caused by GHRP-2 administration increased plasma IGF-1 concentrations, even though an attenuation of GH response was observed.

• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.913-920
• /
• 2011

본 논문은 4-매 주자직 유리섬유/에폭시 적층 복합재가 적용된 철도차량 경량 대차프레임의 피로 수명 및 강도 평가에 대해 기술한다. 대차프레임 경량화 재질로 적용된 유리섬유/에폭시 4-매 주자직 적층 복합재료의 피로특성 평가를 위하여 경사, 위사 그리고 $0^{\circ}/90^{\circ}$ 방향으로 적층된 시험편에 대하여 인장-압축 피로시험을 수행하였다. 유리섬유/에폭시 4-매 주자직 적층 복합재료의 피로시험은 5Hz의 주파수, -1의 응력비(R), $10^7$의 피로수명을 갖도록 하였다. 또한, JIS E 4207의 하중조건에 따른 대차프레임의 피로강도 평가를 Goodman 선도를 통하여 수행하였다. 유리섬유/에폭시 적층 복합재 경량 대차프레임의 피로수명 및 강도 평가기준을 만족하였으며, 무게를 고려할 경우 기존 대차프레임 재질인 SM490A 금속재에 비하여 우수한 피로특성을 갖는다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권5호
• /
• pp.725-731
• /
• 2002

This experiment was performed to understand the changes in plasma leptin in association with plasma IGF-1, body weight and ADG from early growing to late finishing stages of Holstein steers. Blood collection was performed by arterial vein puncture at selected monthly ages of 1 (54 kg), 2.6 (103 kg), 7.2 (205 kg), 13.5 (314 kg), 16.9 (414 kg), 22.2 (550 kg), 24.9 (626 kg) and 27.4 months (695 kg). The blood was analyzed for leptin using the multi-species leptin RIA with recombinant bovine leptin (rbleptin) as standard, plasma IGF-1 was also measured using RIA. Against the standard rbleptin, the multi-species Leptin RIA system's sensitivity, cross reactivity, slope and recovery of 41.0 ng/ml rbleptin in plasma were 4.9 ng/ml, 11.22%, -1.396 and 97.8%, respectively. Plasma leptin measured were more than 5.0 ng/ml, which enable multi-species RIA system to investigate plasma leptin in normal growing steers. Body weight resulted to a highly significant second-degree polynomial relationship with plasma leptin (q=0.54, p<0.0001) and plasma IGF-1 (q=0.44, p<0.0001) from 1 to 27.4 monthly ages. However, the second-degree polynomial curve of plasma leptin and IGF-1 differs showing a concave and convex curvilinear relationship, respectively. ADG was not significantly associated to plasma leptin (r=0.06, p>0.05) and plasma IGF=1 (r=0.06, p>0.05) from 1 to 27.4 monthly ages. Low coefficient, but significant associated increase of plasma leptin and IGF-1 (r=0.12, p<0.008) from 1 to 27.4 months was observed. The uncoordinated increases of plasma IGF-1 at growing and plasma leptin at fattening period, may indicate (1) indirect involvement of endogenous IGF-1 on leptin secretion, and (2) IGF-1 level may signify lean and bone accretion while plasma leptin may mirror body fatness across the monthly ages of Holstein steers.

• 대한영양사협회학술지
• /
• 제11권3호
• /
• pp.365-374
• /
• 2005

This study was conducted to compare the validity of obese index among body mass index(BMI), waist to hip ratio(WHR), and waist circumference(WC) and to determine which is the best in relation to cardiovascular risk factors of middle aged Korean(40-64yr).Data from the 1998 Korean Health and Nutrition Survey were used(N=3380). Anthropometric indices and cardiovascular risk factors were measured. Chi-square test, analysis of variance following duncan's multiple range test, partial correlation analysis, and Receiver Operator characteristic(ROC) curves were used in the analysis. There was a significant increasing trend in WHR, systolic blood pressure(SBP), high density lipoprotein cholesterol(HDL), and fasting blood sugar(FBS) with age categories of male and in BMI, WC, WHR, diastolic blood pressure(DBP), SBP, total cholesterol(TC), low density lipoprotein cholesterol(LDL), triglycerol(TG), and FBS with those of female. Specially female had the characteristics of upper body fat and systolic blood pressure risk(p<0.05). Proportions of subjects with lifestyle factors related to cardiovascular risk in overweight or upper body fat group were higher than that of normal group. Higher proportions of subjects were practiced exercise in upper body fat group of male than in other groups. Among 7 cardiovascular risk factors in partial correlation analysis, BMI had the highest correlation coefficient in 6 risk factors in male, whereas WC in 4 risk factors in female. Mean of each obese index according to cardiovascular risk groups except smoker was higher than that of normal(p<0.05). These trends were shown in upper body fat group and female. In ROC analysis of 12 risk factors and health conditions, the largest area under curve among obese indices for risk factors were BMI in male and WHR in female. The optimal cutoff values of each index(BMI: WHR: WC) for one or more cardiovascular risk factors were 23.13: 0.89: 85.35 in male and 23.57: 0.84: 78.35 in female. The results showed that cardiovascular risk factors were prevalent in middle aged Koreans within normal limits of obese indices like another Asians. For the identification of cardiovascular risk factors of middle aged Koreans, BMI for men and WHR for women are appropriate indices. But it is recommended that BMI, WHR, and WC, all three indices should be considered, when using these indices.

• 대한치과보철학회지
• /
• 제31권3호
• /
• pp.423-446
• /
• 1993

Titanium and its alloys are finding increasing use in medical devices and dental implants. The strong selling point of titanium is its resistance to the highly corrosive body fluids in which an implant must survive. This corrosion resistance is due to a tenacious passive oxide or film which exists on the metal's surface and renders it passive. Potentiodynamic polarization measurement is one of the most commonly used electro-chemical methods that have been applied to measure corrosion rates. And the potentiodynamic polarization test supplies detailed information such as open circuit, rupture, and passivation potential. Furthermore, it indicates the passive range and sensitivity to pitting corrosion. This study was designed to compare the corrosion resistance of the commonly used dental implant materials such as CP Ti, Ti-6A1-4V, Co-Cr-Mo alloy, and 316L stainless steel. And the effects of galvanic couples between titanium and the dental alloys were assessed for their useful-ness-as. materials for superstructure. The working electrode is the specimen , the reference electrode is a saturated calomel electrode (SCE), and the counter electrode is made of carbon. In $N_2-saturated$ 0.9% NaCl solutions, the potential scanning was performed starting from -800mV (SCE) and the scan rate was 1 mV/sec. At least three different polarization measurements were carried out for each material on separate specimen. The galvanic corrosion measurements were conducted in the zero-shunt ammeter with an implant supraconstruction surface ratio of 1:1. The contact current density was recorded over a 24-hour period. The results were as follows : 1. In potential-time curve, all specimens became increasingly more noble after immersion in the test solution and reached between -70mV and 50mV (SCE) respectively after 12 hours. 2. The Ti and Ti alloy in the saline solution were most resistant to corrosion. They showed the typical passive behavior which was exhibited over the entire experimental range. Therefore no breakdown potentials were observed. 3. Comparing the rupture potentials, Ti and Ti alloy had the high(:st value (because their break-down potentials were not observed in this study potential range ) followed by Co-Cr-Mo alloy and stainless steel (316L). So , the corrosion resistance of titanium was cecellent, Co-Cr-Mo alloy slightly inferior and stainless steel (316L) much less. 4. The contact current density sinks faster than any other galvanic couple in the case of Ti/gold alloy. 5. Ag-Pd alloy coupled with Ti yielded high current density in the early stage. Furthermore, Ti became anodic. 6. Ti/Ni-Cr alloy showed a relatively high galvanic current and a tendency to increase.