• Microbiology and Biotechnology Letters
• /
• v.43 no.2
• /
• pp.164-168
• /
• 2015

Citric acid is produced via submerged fermentation using yeasts. Among eight different strains of yeast, Candida zeylanoides was chosen as the strain for producing citric acid and optimized for various C/N ratios and effects of phosphate or Fe²⁺ ions in a clean carbon source medium (glucose: fructose, 1:1). The yield of citric acid was maximized at a C/N ratio of 40/1, a phosphate addition of 1.0 g/l, and an Fe²⁺ ion concentration of less than 50 mg/l, yielding up to 91 g/L in the broth with 18.5 g/l of isocitric acid in a six-day fermentation period using a pre-treated molasses medium. The yield of batch culture was 0.51 (Y_p/s, g/g) in a 5 L-Jar fermenter.

• Environmental Engineering Research
• /
• v.19 no.1
• /
• pp.37-40
• /
• 2014

This research investigates the quality changes during composting of bagasse and pig manure amended with 30% of surfactant-coated charcoal (SC). Two treatments, 30% uncoated charcoal (UC) amendment and no charcoal (NC) amendment, were done as control. Charcoal was coated with 0.37 mM tetradecyltrimethylammonium bromide (TDMA), a cationic surfactant, at the dosage of 10 g/L. At the end of the composting period, the carbon to nitrogen (C/N) ratio of SC amendment was 9.7; whereas, the C/N ratios of UC and NC amendment were 12.6 and 21.4, respectively. Plant nutrients contents of the compost produced from SC amendment were 20.7 mg $NH_4{^+}-N/g$, 42.8 mg $NO_3{^-}-N/g$, and 41.7 mg P/g. High nitrate and phosphate concentrations in SC amendment were due to the adsorption of these anions on the positive charge of TDMA. Desorption of plant nutrients retained in the compost pellets was also investigated. It was predicted that nitrate was fully desorbed from a pellet at 23 days for SC amendment, which was later than UC (14 days) and NC (10 days) amendment. A slow release of nitrate from the compost pellet will reduce the nitrate leaching into the environment. Thus, the adding of SC in the compost pile is one of the alternative methods to improve the quality of compost and plant nutrient retention.

• Journal of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.7-12
• /
• 1981

Solvolysis of $p-CH_3, p-H, p-Cl and p-NO_2$-benzenesulfonyl chlorides have heen studied in MeOH-MeCN mixtures. A nonlinear Hammett plot with a ratio order of p-NO_2 > p-CH_3 > p-H > p-Cl was obtained; the reaction was thought to proceed by an S_N1-S_N2 borderline mechanism. In all cases the reactivity was a maximum at 90∼95%(v) methanol, whereas methanol monomer selectivity defined as fi = \frac{k1}{ki}i (k1; observed pseudo-first order rate constant: ki; hypothetical rate constant for MeOH solution having the same polymer structure as in the pure MeOH) was a maximum at 80% methanol with a decreasing order of fi as p-NO_2 > p-Cl > p-H > p-CH_3.$ This was interpreted as the decrease in tightness of transition state; the larger the fi, the tighter is the MeOH attached to the substrate, and hence the more susceptible the substrate becomes to the approaching monomer methanol.

• Composites Research
• /
• v.12 no.2
• /
• pp.53-61
• /
• 1999

A failure criterion must be considered in each failure mode and loading condition to provide easy determining strength parameters, flexibility and rational simplicity. In this study, new failure criterion was developed by introducing equivalent strength under biaxial loading of tension and torsion. The experimental results showed that the equivalent biaxial strength has a power law relation with respect to a parameter, cos($tan^{-1}R_b$). Failure strength under biaxial loadings could be predicted as a function of tensile strength, torsional strength and biaxial ratio. The scattering of experimental data could be predicted using a Weibull distribution function and the concept of equivalent biaxial strength. Also, in this study, a fatigue theory was developed based on a plane stress model which enabled the S-N curve for combined stress states to be predicted from the S-N data for uniaxial loading. The prediction models can be predicted a biaxial strength and fatigue life of general laminated composite naterials under multi-axial loadings.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.55-62
• /
• 2010

In addition to the previous study for development of a 1,200 N-class bipropellant rocket engine with concentrated hydrogen peroxide, the effect of characteristic length and thrust measurement were experimentally evaluated. Tests with characteristic lengths of 0.95, 1.07, and 1.20 m were performed and $C^*$ and Isp efficiencies were increased as increasing characteristic length. The maximum $C^*$ and Isp efficiencies were 98.4% and 93.1% respectively. Based on the evaluation of the designed engine, the optimized characteristic length was proposed in using the engine adapted decomposed hydrogen peroxide and the engine performance at vacuum-level was evaluated using thrust and Isp efficiency at the designed equivalence ratio. As a result, 218.4 s at sea-level, 253.3 s at vacuum-level, and vacuum thrust of 1035.3 N can be estimated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.322-322
• /
• 2010

For boron doping on n-type silicon wafer, around $1,000^{\circ}C$ doping temperature is required, because of the relatively low solubility of boron in a crystalline silicon comparing to the phosphorus case. Boron doping by fiber laser annealing and lamp furnace heat treatment were carried out for the uniformly deposited p-a-Si:H layer. Since the uniformly deposited p-a-Si:H layer by cluster is highly needed to be doped with high temperature heat treatment. Amorphous silicon layer absorption range for fiber laser did not match well to be directly annealed. To improve the annealing effect, we introduce additional lamp furnace heat treatment. For p-a-Si:H layer with the ratio of $SiH_4:B_2H_6:H_2$=30:30:120, at $200^{\circ}C$, 50 W power, 0.2 Torr for 30 min. $20\;mm\;{\times}\;20\;mm$ size fiber laser cut wafers were activated by Q-switched fiber laser (1,064 nm) with different sets of power levels and periods, and for the lamp furnace annealing, $980^{\circ}C$ for 30 min heat treatment were implemented. To make the sheet resistance expectable and uniform as important processes for the $p^+$ layer on a polished n-type silicon wafer of (100) plane, the Q-switched fiber laser used. In consequence of comparing the results of lifetime measurement and sheet resistance relation, the fiber laser treatment showed the trade-offs between the lifetime and the sheet resistance as $100\;{\omega}/sq.$ and $11.8\;{\mu}s$ vs. $17\;{\omega}/sq.$ and $8.2\;{\mu}s$. Diode level device was made to confirm the electrical properties of these experimental results by measuring C-V(-F), I-V(-T) characteristics. Uniform and expectable boron heavy doped layers by fiber laser and lamp furnace are not only basic and essential conditions for the n-type crystalline silicon solar cell fabrication processes, but also the controllable doping concentration and depth can be established according to the deposition conditions of layers.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.3
• /
• pp.1-8
• /
• 2011

In addition to the previous study for development of a 1,200 N-class bipropellant rocket engine with concentrated hydrogen peroxide, the effect of characteristic length and thrust measurement were experimentally evaluated. Tests with characteristic lengths of 0.95, 1.07, and 1.20 m were performed and $C^*$ and Isp efficiencies were increased as increasing characteristic length. The maximum $C^*$ and Isp efficiencies were 98.4% and 93.1% respectively. Based on the evaluation of the designed engine, the optimized characteristic length was proposed in using the engine adapted decomposed hydrogen peroxide and the engine performance at vacuum-level was evaluated using thrust and Isp efficiency at the designed equivalence ratio. As a result, 218.4 s at sea-level, 253.3 s at vacuum-level, and vacuum thrust of 1035.3 N can be estimated.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.235-238
• /
• 2005

Sulfonated poly(ether sulfone) copolymers (PESs) were synthesized using hydroquinone 2-potassium sulfonate (HPS) with other monomers (bisphenol A and 4-fluorophenyl sulfone). PESs with different $mole\%$ of hydrophilic group were prepared by changing the mole ratio of HPS in the polymerization reaction. The chemical structure and the thermal stability of these polymers were characterized by using $^1H-NMR$, FT-IR and TGA techniques. The PES 60 membrane, which has $60 mole\%$ of HPS unit in the polymer backbone, has a proton conductivity of 0.091 S/cm and good insolubility in boiling water. The TGA showed that PES 60 was stable up to $272^{\circ}C$ with a char yield of about $29\%\;at\;900^{\circ}C\;under\;N_2$ atmosphere. To investigate the single cell performance, the catalyst coated PES 60 membrane was used and a single cell test was carried out using $H_2/O_2$ gases as fuel and oxidant at various temperatures. We observed that the cell performance was enhanced by increasing the cell temperature. A current density of $1400 mA/cm^2$ at 0.60 V was obtained at $70^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.55 no.2
• /
• pp.126-134
• /
• 2018

Using aqueous solution free radical polymerization with glacial acrylic acid (GAA), maleic anhydride (MA) and sodium methallyl disulfonate (SMADS), a novel linear polycarboxylate dispersant was synthesized for ceramics. Dispersant linear structural characterization was done by FTIR, $^1H$ NMR, HPLC and GPC, and the ratio of monomers was determined using an orthogonal experiment. This research is focused on the effects of polymerization temperature, monomer mole ratios and dosage of initiator on ceramic slurry viscosity with linear polycarboxylate dispersant for ceramic dosage rate of 0.30% (based on dry slurry), all of which were investigated by single factor test. The best polymerization conditions for linear GAA-MA-SMADS are when n(AA) : n(MA) : n(SMADS) equals 3.0 : 1.0 : 0.5, the molecular weight of the polymer is 4600 daltons, the initiator sodium persulfate accounts for 7% of the total mass of polymerized monomers, the polymerization temperature is $90^{\circ}C$ and the reaction time is 2 h. The ceramic body slurry viscosity drops from $820mPa{\cdot}s$ to $46mPa{\cdot}s$ when the concentration of the polycarboxylate dispersant is 0.30%.

• Structural Engineering and Mechanics
• /
• v.47 no.6
• /
• pp.839-856
• /
• 2013

Metallic annular discs with their outer boundary fully constrained are studied with newly derived semi-analytical solutions for the effects of thickness variations under thermal loading and unloading. The plane stress and axisymmetric assumptions were adopted, and the thickness of the disk depends on the radius hyperbolically with an exponent n. Furthermore, it is assumed that the stress state is two dimensional and temperature is uniform in the domain. The solutions include the elastic, elastic-plastic and plastic-collapse behavior, depending on the values of temperature. The von Mises type yield criterion is adopted in this work. The material properties, Young's modulus, yield stress and thermal expansion coefficient, are assumed temperature dependent, while the Poisson's ratio is assumed to be temperature independent. It is found that for any n values, if the normalized hole radius a greater than 0.6, the normalized temperature difference between the elastically reversible temperature and plastic collapse temperature is a monotonically decreasing function of inner radius. For small holes, the n values have strong effects on the normalized temperature difference. Furthermore, it is shown that thickness variations may have stronger effects on the strain distributions when temperature-dependent material properties are considered.