• Journal of Hydrogen and New Energy
• /
• v.16 no.2
• /
• pp.122-129
• /
• 2005

The characteristics of hydrogen storage have been investigated in the Ti-Cr-Mo and Ti-Cr-V ternary alloys with bcc structure. The alloys were melted by arc furnace and remelted 4-5 times for homogeneity. The lattice parameters, microstructures and phases of the alloys were examined by SEM, EDX and XRD, and the Pressure-Composition isotherms of the alloys were measured. From these data the relationship of the maximum and effective hydrogen storage capacities vs. chemical composition, lattice parameter and the radius of tetrahedral site were analyzed and discussed. The results showed that all of these alloy, in the range of the this study, had mainly bcc solid solutions with small amount of Ti segregation due to a lower melting point of Ti compared with other elements. Lattice parameters of the alloys were very near to the atomic average values of lattice parameters of the constituent elements. It was also found that maximum hydrogen storage capacities of the Ti-Cr-Mo alloys increased with increasing Ti content and the radius of tetrahedral site but the effective hydrogen storage capacities decreased after showing the maximum. The hydrogen storage capacities of the Ti-Cr-V alloys were almost same even though the V contens were quite different from alloy to alloy and this could be attributed to the almost same Ti/Cr ratio of the alloys. The maximum effective hydrogen storage capacity of the Ti-Cr-Mo alloys was revealed at Ti content of about 40${\sim}$50 at% and radius of tetrahedral site of 0.43${\sim}$0.45 nm. The Ti-Cr-V alloys showed the hydrogen storage capacities of 3.0 wt% and effective hydrogen storage capacities of 1.5 wt%.

• Journal of Aquaculture
• /
• v.21 no.2
• /
• pp.96-101
• /
• 2008

To induce of maturation and ovulation, ovary with different development stage of oocytes of sevenband grouper Epinephelus septemfasciatus(n=51, TL $69.1{\pm}1.0$ cm, BW $5.8{\pm}0.3$ kg) rearing indoor-tank in mature and spawning season(June to July) were investigated by cannulation. Female with yolk globule stage oocyte($300{\sim}500{\mu}m$) was injected with human chorionic gonadotropin(HCG, 500 IU/kg BW). Oocytes developed at diameter $300{\sim}700{\mu}m$ in 24 hrs after the HCG injection, and the distribution ratio of over $800{\mu}m$ of oocytes diameter in the cannulated eggs were $91.3{\sim}98.8%(95.1{\pm}3.7%)$ in 48 hrs after the HCG injection. Ovulation was induced from 7 out of 8 female after the HCG injection. The total volume of stripped eggs was 2,480 mL, and the volume of buoyant eggs was 1,360 mL. The fertilization and hatching rates of buoyant eggs were $56.2{\sim}94.9%$ and $70.7{\sim}97.9%$, respectively. These results suggested that HCG 500 IU/kg BW effects on maturation and ovulation of female sevenband grouper with yolk globule stage of oocyte.

• Korean Journal of Food Science and Technology
• /
• v.25 no.4
• /
• pp.307-312
• /
• 1993

Antioxdant effect was studied in model system with linoleic acid methylester and tocochromanols $({\alpha}-,\;{\beta}-,\;{\gamma}-,\;{\delta}-tocopherol\;and \;{\alpha}-,\;{\gamma}-,\;{\delta}-tocotrienol)$ under definite autoxidation condition-temperature $(40,\;60,\;80^{\circ}C),\;O_2\;(0,\;10,\;20%\;O_2\;in\;N_2)$. 13-Hydroperoxy-9-cis-11-trans-, 13-hydroperoxy-9-trans-11-trans-, 9-hydroperoxy-10-trans-12-cis-, 9-hydroperoxy-10-trans-12-trans-octadecadienoic acid methylester as the major oxidation product were produced from linoleic acid methylester by autoxidation, analyzed with HPLC and antioxidant activities were compared by their quantitative changes. Experimental results showed that all added tocochromanols except ${\alpha}-tocotrienol$ had antioxidant effect at $60^{\circ}C$, and also ${\alpha}-tocopherol$, ${\alpha}-tocotrienol$ and ${\delta}-tocotrienol$ had prooxidant effect at $80^{\circ}C$. And cis/trans-hydroperoxide was predominantly produced at $40^{\circ}C$, but trans/trans-hydroperoxide at $80^{\circ}C$. Except no reproductive experimental data in produced hydroperoxides amount, the production ratio of cis/trans-:trans/trans-hydroperoxides in the autoxidation condition of range from $40^{\circ}C/10%,\;O_2\;to\;60^{\circ}C/20%\;O_2$ were as follows: ${\alpha}-T>{\alpha}-T_3>{\gamma}-T>{\beta}-T>{\gamma}-T_3>{\delta}-T>{\delta}-T_3$. This result showed that ${\alpha}-tocopherol$ among tocochromanols had the lowest antioxidant effect.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.18
• /
• pp.7897-7907
• /
• 2014

Background: There is paucity of studies defining the prevalence of non-communicable disease (NCD) risk factors in Saudi Arabia despite the surging epidemic of obesity, change in dietary habits and sedentary lifestyle. Objectives: This cross-sectional study aimed to assess the prevalence of NCDs risk factors among employees at King Faisal University in Al Hassa, Saudi Arabia and to determine the possible correlates for clustering of NCDs risk factors among them. Materials and Methods: All employees were invited to participate; the World Health Organization STEPwise approach was used for data collection which consisted of a personal interview to collect socio-demographic characteristics, NCD history, tobacco use, vegetables and fruit consumption, and physical activity (PA), followed by anthropometric measurements namely weight, height and waist circumference and blood pressure measurements, subjects were finally subjected to biochemical tests with determination of fasting plasma glucose, serum triglycerides, cholesterol and high density lipoproteins. Results: Of the surveyed employees (n=691), daily current smokers accounted for 22.7%. 94.9%, 95.1% and 86% consumed < 5 servings per day of vegetables, fruits and both fruits and vegetables respectively, 73% were physically inactive, 64% were overweight or obese, 22.1% had hypertension, and 21.5% were diabetics. Elevated cholesterol levels were found in 36.6%, low high density lipoproteins in 36.8%, and elevated triglycerides in 36.1%. Only 3% had no NCD risk factors, and 57.6% had ${\geq}3$ factors. Multivariate logistic regression showed that gender (being male, adjusted odds ratio 'aOR'=1.51), aged ${\geq}50$ years (aOR=3.06), < college education (aOR=1.75), current smokers (aOR=2.37), being obese (aOR=6.96) and having a low PA level (aOR=4.59) were the significant positive predictors for clustering of NCD risk factors. Conclusions: Over fifty percent of the studied university's employees had multiple (${\geq}3$) NCD risk factors. Screening and health promotion initiatives should be launched at least targeting the modifiable factors to avert the excessive risk for cardiovascular disease, diabetes mellitus and several types of cancers.

• The Journal of Engineering Geology
• /
• v.30 no.1
• /
• pp.31-42
• /
• 2020

Electrical resistivity and downhole seismic surveys were conducted together with bore investigations and well-logging to examine subsurface structures in small-scale landslides at Sinjindo-ri, Geunheung-myeon, Taean-gun, Chungcheongnam-do, Republic of Korea in 2014. On the basis of the low N-values at depths of 5~7 m in borehole BH-2, downhole seismic and electrical dipole-dipole resistivity surveys were performed to delineate geological weak zones. The low-resistivity zones (<150 Ω·m) measure ~8 m in thickness and show a close depth correspondence to weathered soils consisting mainly of silty clays as identified from the bore investigations and well-logging data. Compared with weak zones in borehole BH-1, weak zones in BH-2 are characterized by lower densities (1.6~1.8 g/㎤) and resistivities (<150 Ω·m) and greater variation in Poisson's ratio. These observations can be explained by the presence of wet silty clays rich in weathered soil material that have resulted from heavy rainfall and rises in groundwater level. Downslope movements are probably caused by the sliding of wet clay that acts to reduce the strength of the weathered soil.

• Journal of radiological science and technology
• /
• v.25 no.1
• /
• pp.63-71
• /
• 2002

The aim of this study Is to develop a simple and fast method which computes in-vivo doses from transmission doses measured doting patient treatment using an ionization chamber. Energy fluence and the dose that reach the chamber positioned behind the patient is modified by three factors: patient attenuation, inverse square attenuation. and scattering. We adopted a straightforward empirical approach using a phantom transmission factor (PTF) which accounts for the contribution from all three factors. It was done as follows. First of all, the phantom transmission factor was measured as a simple ratio of the chamber reading measured with and without a homogeneous phantom in the radiation beam according to various field sizes($r_p$), phantom to chamber distance($d_g$) and phantom thickness($T_p$). Secondly, we used the concept of effective field to the cases with inhomogeneous phantom (patients) and irregular fields. The effective field size is calculated by finding the field size that produces the same value of PTF to that for the irregular field and/or inhomogeneous phantom. The hypothesis is that the presence of inhomogeneity and irregular field can be accommodated to a certain extent by altering the field size. Thirdly, the center dose at the prescription depth can be computed using the new TMR($r_{p,eff}$) and Sp($r_{p,eff}$) from the effective field size. After that, when TMR(d, $r_{p,eff}$) and SP($r_{p,eff}$) are acquired. the tumor dose is as follows. $$D_{center}=D_t/PTF(d_g,\;T_p){\times}(\frac{SCD}{SAD})^2{\times}BSF(r_o){\times}S_p(r_{p,eff}){\times}TMR(d,\;r_{p,eff})$$ To make certain the accuracy of this method, we checked the accuracy for the following four cases; in cases of regular or irregular field size, inhomogeneous material included, any errors made and clinical situation. The errors were within 2.3% for regular field size, 3.0% irregular field size, 2.4% when inhomogeneous material was included in the phantom, 3.8% for 6 MV when the error was made purposely, 4.7% for 10 MV and 1.8% for the measurement of a patient in clinic. It is considered that this methode can make the quality control for dose at the time of radiation therapy because it is non-invasive that makes possible to measure the doses whenever a patient is given a therapy as well as eliminates the problem for entrance or exit dose measurement.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.232-232
• /
• 1999

교류형 플라즈마 방전 표시기(AC Plasma Display Panel, AC PDP)에 사용되는 플라즈마는 그 부피가 너무 작아서 플라즈마에 변화를 일으키지 않고 그 물성을 관측하기란 쉬운일이 아니다. 그래서 주로 PDP 내의 물성을 관측하는 데 시뮬레이션에 의존하게 된다. 그 물성중에 PDP내의 전계 분포에 대한 정보는 방전의 형성 및 소멸에 대한 많은 단서를 제공하고 있다. 특히 AC PDP의 경우, 유전체에 형성되는 벽적하(wall charge)가 방전의 형성 및 PDP 구동에 중요한 역할을 하는데, 이는 PDP 내의 전계 분포를 살펴봄으로써 대략 예측할 수 있다. 본 연구에서는 시뮬레이션에 의존하지 않고, 직접 레이저 유도 형광법을 이용하여 AC PDP 내의 전계를 측정하였다. 방전 가스인 헬륨(He)의 에너지 준위는 전계의 크기에 따라 에너지 준위가 변화하여, Rydberg(n$\geq$8) 준위가 여러 개의 준위로 나누어지는 현상이 일어나는데, 이를 Stack 효과라고 한다. 따라서 전계의 세기가 커짐에 따라서 각 준위와 준위 사이 값(splitting)이 커지는데, 이를 이용하면 전계를 측정할 수 있다. 즉, 헬륨 원자를 여기시키는 레이저 파장을 변화시키면서 관측되는 레이저 유도 형광 신호를 관측하면, 준위의 splitting을 관측할 수 있다. 본 연구에서는 PDP 내의 전계의 시간적 변화를 관측하였다. 50%, 40kHz의 구형파를 PDP의 두 전극에 가하였을 때, 플라즈마가 켜진 상태뿐만 아니라 플라즈마가 꺼진 후에도 전계에 의한 Splitting 신호가 관측이 되었는데, 전계로 환산하였을 때, 그 값은 대략 수 kV/cm의 값을 갖았는데, 이는 wall charge에 의한 값으로 사료된다.결과로 생각되어진다.플라즈마의 강도값을 입력하여 플라즈마의 radiation을 검출하고, 스퍼터링 공정중 실질적인 in-situ 정보로 이용하였다. PEM을 통하여 In/Sn의 플라즈마 강도변화를 조사하였다. 초기 In/Sn의 플라즈마 강도(intensity)는 강도를 100하여, 산소를 주입한 결과, plasma intensity가 35 줄어들었고, 이때 우수한 ITO 박막을 얻을 수 있었다. Pulsed DC power를 사용하여 아크 현상을 방지하였다. PET 상에 coating 된 ITO 박막의 표면저항과 광투과도는 4-point prove와 spectrophotometer를 이용하여 분석하였고, AES로 박막의 두께에 따른 성분비를 확인하였다. ITO 박막의 광투과도는 산소의 유량과 sputter 된 In/Sn ion의 plasma emission peak에 따라 72%-92%까지 변화하였으며, 저항은 37$\Omega$/$\square$ 이상을 나타내었다. 박막의 Sn/In atomic ratio는 0.12, O/In의 비율은 In2O3의 화학양론적 비율인 1.5보다 작은 1.3을 나타내었다.로 보인다.하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다. 기대할 수 있는 여러

• Journal of Information Technology and Architecture
• /
• v.9 no.2
• /
• pp.155-166
• /
• 2012

Recently EA(Enterprise Architecture) has been receiving growing attentions again from the public sectors. It is because EA maturity result is reflected to the organization's informatization level and EA maturity ratio has been enlarged. There has been more participation from the Chief Information Officers of the public sectors. EA research in the public sectors has influenced IT environment since the research started in late '90, the legislation work done in '05, and the maturity model developed in '06. However, there are some remaining tasks to solve. EA policy is introduction oriented, its contribution to the consecutive the best UN e-Government rank is limited, and its user-friendly responding system is still lacking. Related research outcomes are rather microscopic focusing only on the models and maturity than implicating on the public policy in a macroscopic manner. In this respect, this study will provide the implication on how EA policy should be. Requirements derived from EA stakeholders and the tasks will be arranged in accordance with its domain, then the performance and tasks will be demonstrated. As guiding EA stake holders and information related officers to setup the EA policy with these results, this study is expected to support information the policy drivers.

• Journal of Korean Society of Forest Science
• /
• v.101 no.4
• /
• pp.695-702
• /
• 2012

The chestnut management standard diagnostic table is developed and would be utilized in order that a manager raising chestnuts checks where the own level of management is and grasps current state of own for the purpose of planning aims and advancing toward a higher level. The developed 'Chestnut management standard diagnostic table' consisted of 3 first classified items, 19 second classified items and 2 product indicator items by the chestnut experts consultative meeting. A survey of 212 farmhouses in 4 major producing area was conducted. Except invalid survey of 53 farmers, 159 farmhouses interviewed were used in analysis. Total score was calculated with sum of each item's score. According to the survey results, average score is 68.0 and Buyeo received the highest score of 69.7 and Suncheon received the lowest score of 61.8 by regional groups. The higher the group in score, the better it is in output per hectare. But the property of 'the ratio of the best products in total products' does not show a statistical correlation. Generally the score of 'management-based evaluation indicator part' and 'management and sale capacity indicator part' in Suncheon was low because of many elderly people. In part of 'manufacturing technology indicator' as Environmentally-Friendly production is progressed in over 70% of four regions, when comes to a disease and insect pest control there are rarely farmhouses having a way of crop dusting.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.5-12
• /
• 2014

Anaerobic digestion was investigated for the stabilization of sludge, decrease of volatile solids, production of biogas for wastewater sludge. In this study, total solids and volatile solids, elemental analysis were conducted to determine characteristics of various types of sludges and investigate the feasibility of biogas production of Municipal Wastewater Sludge (MWS), Industrial Wastewater Sludge (IWS), mixed sludge (Mix), and Municipal Wastewater Sludg Cake (MWSC). Total solids, volatile solids, and C/N ratio were determined in the range of 11.2~20.6 %, 62.1~83.1 % of TS and 4.96~8.33 %. Using the biochemical methane potential (BMP test), mixed sludge and wastewater sludge finished the methane production within approximately 20 day and 16~17 day. Sludge cake finished within 10 day. Mixed sludge produced 395.5 mL $CH_4$ per g of Volatile Solid (VS) and resulted in the highest methane production. For carbon dioxide production, five sludges had similar value of accumulated carbon dioxide production except for sludge cake.