• 제목/요약/키워드: Rust

검색결과 439건 처리시간 0.02초

G-SAVE 공법 탑재 차량의 예비위험성평가 (Preliminary Hazard Analysis of Vehicle with G-SAVE Technology)

  • 정의필;박현철;박영수;안병철;한덕수;전현준
    • 한국표면공학회지
    • /
    • 제56권4호
    • /
    • pp.283-287
    • /
    • 2023
  • The structures for road safety are guard rails that protect the cars and passengers. If an accident occurs on the roads after a long period of installation, it may escalate into a major disaster. In order to repair many guard rails, the existing repair method of replacing them with new ones requires enormous financial resources. To solve this problem, the G-SAVE method was developed to repair the guard rail without replacing them. This method removes the rust on the surface of the guard rail and then performs ambient-dip galvanizing coating on it without replacing the new ones. No studies or reports have yet been made on the risk assessment of harmful substances, vehicles for these entire processes. Therefore, this paper focuses on risk assessment using the PHA (Preliminary Hazard Analysis) technique and conducts risk assessment for concept design stage of the coating vehicles.

Selective Catalytic Reduction (SCR) 환경에서 18% 크롬 스테인리스강의 부식 거동 (Corrosion behaviors of 18Cr Stainless Steels in Selective Catalytic Reduction Environments)

  • 김희산
    • Corrosion Science and Technology
    • /
    • 제22권3호
    • /
    • pp.175-186
    • /
    • 2023
  • Effects of high-temperature environment and low-temperature environment on corrosion behaviours of 18Cr stainless steels (type 304L, type 441) in simulated selective catalytic reduction (SCR) environments were studied using weight loss test in each environment and rust analysis. With time to exposure to the high-temperature environment, type 441 was more resistant to corrosion than type 304L due to both higher diffusivity of Cr and lower thermal expansion coefficient in α-iron. The former provides a stable protective Cr2O3 layer. The latter leaded to low residual stress between scale and steel, reducing the spallation of the scale. With time to exposure to the low-temperature environment, on the other hand, type 304L was more resistant to corrosion than type 441. The lower resistance of type 441 was caused by Cr-depleted zone with less than 11% formed during the pre-exposure to a high-temperature environment, unlike type 304L. It was confirmed by results from the crevice corrosion test of sensitised 11Cr steel. Hence, to achieve higher corrosion resistance in simulated SCR environments, ferritic stainless steels having lower thermal expansion coefficient and higher diffusivity of Cr but containing more than 18% Cr are recommended.

Anti-corrosion impact of green synthesis of Silica nanoparticles for the sports structures in physical exercise activities

  • Zhixin Zhang;Zhiqiang Cai;Khidhair Jasim Mohammed;H. Elhosiny Ali
    • Advances in concrete construction
    • /
    • 제15권1호
    • /
    • pp.41-46
    • /
    • 2023
  • Sport has no age limit and can be done anywhere and in any condition with minimal equipment. The existence of sports spaces in all parts of the world is considered a citizen's right. One of the activities carried out in this field is installing sports equipment and structures in parks and encouraging citizens to use this equipment for physical health with the least cost and facilities. Installing sports structures in open spaces such as parks is a practical step for developing citizens' sports. Although using devices in parks is acceptable, it is more critical to meet scientific and technical standards. The components of these structures must have high strength and endurance against changes in environmental conditions such as humidity, temperature difference, and corrosion. Among the various causes of material degradation, corrosion has always been one of several fundamental causes of metal equipment failure. Sports structures in open spaces are not safe from corrosion. Uniform corrosion is the most common type of corrosion. This corrosion usually occurs uniformly through a chemical or electrochemical reaction across the surface exposed to the corrosive environment. Rust and corrosion of outdoor sports structures are examples of this corrosion. For this reason, in this research, with the green synthesis of silica nanoparticles and its application in outdoor sports structures, the life span of these structures can be increased for the use of physical exercises as well as their quality.

A case of splenic extraskeletal mesenchymal chondrosarcoma in a Yorkshire Terrier dog

  • Eunhye Jung;Hyoung-Seok Yang;Ji-Youl Jung;Jae-Hoon Kim
    • 한국동물위생학회지
    • /
    • 제46권4호
    • /
    • pp.357-362
    • /
    • 2023
  • A 7-year-old male Yorkshire Terrier dog was present to an animal clinic and a large soft mass was found in the spleen by radiological examination, and total splenorectomy was performed. Grossly, a large protruded splenic mass was soft to moderately firm and multilobulated. On the cut surface, the mass was off-white to tan, dark red, and rust colored with many cavitation and had gelatinous areas. Histologically, the tumor cells were characterized by coexistence of the primitive mesenchymal tissues and mature or immature cartilage tissues. Primitive mesenchymal areas were composed of round/oval or spindle shaped immature cells with high mitosis. The tumor cells of the cartilage areas were located in basophilic cartilaginous matrix. Intercellular matrix in the cartilaginous areas was stained blue with Masson's trichrome and deep blue with alcian blue, respectively. Immunohistochemically, the cartilaginous tumor cells demonstrated positive reactions for vimentin and S-100, and surrounding mesenchymal tumor cells are immunopositive for vimentin. This case was diagnosed as splenic extraskeletal mesenchymal chondrosarcoma of a Yorkshire Terrier dog, a toy breed.

금속가공유를 취급하는 남성 근로자의 접촉피부염 (Contact dermatitis among male workers exposed to metalworking fluids)

  • 진영우;이준영;김은아;박승현;채창호;최용휴;김규상
    • Journal of Preventive Medicine and Public Health
    • /
    • 제30권2호
    • /
    • pp.381-391
    • /
    • 1997
  • 산업장에서 사용되는 오일의 종류와 그 폭로 형태의 차이에 따른 피부질환의 유병률과 접촉성 피부질환의 주요특성을 파악하기 위하여 사용오일의 분석, 1회의 방문진찰과 2회에 걸친 설문조사를 실시하였으며, 아래와 같은 결과를 얻었다. 1. 비수용성 절삭유의 분석결과, 탄소수 12-20개 사이의 지방탄화수소(do, tri, tetra... decane)가 49.04%였으며, methy-naphthalene 등의 방향족이 14.90% 기타지방 및 방향족탄화수소화합물이 36.04%였으며, 방청유의 분석결과 대부분(90.99%)이 탄소수 6-9개 사이의 지방족 화합물로 구성되어 있으며, 일부 알콜 및 에스테르계 화합물도 포함되어 있어 두 오일은 서로 다른 물질이며, 따라서 자극성도 다를 것으로 생각된다. 2. 피부과적 진찰 결과, 전 연구대상에서 전체 피부 질환의 빈도(시점유병률)는 17명(연구대상자 100명당 53.1)이었다. 접촉피부염, 오일 여드름과 모낭염의 빈도(시점유병률)는 7명(12.7), 11명(20.0)이었으며, 광알러지성 피부염, 염소성 여드름, 종양, 피부변색은 관찰되지 않았다. 3. 자기기입식 설문조사 결과, 두 군에서 접촉피부염의 누적유병률과 1년간 기간유병률은 연구대상자 100명당 28.4, 16.7와 15.3, 13.0로서 차이를 보였으나, 통계학적으로 유의하지 않았고(p>0.05), 연령과 접촉 기간에 따른 차이는 없었다(p>0.05). 4. 발생까지의 기간은 절삭유접촉군의 경우 4개월 미만이 8명(22.9%)이었고, 26명(74.3%)이 2년 이내인 것으로 나타났으나, 방청유접촉군의 경우 응답자 6명 중 4명(66.7%)이 2년 이후로 대답해 군간에 뚜렷한 차이를 보였으며(p<0.05), 10년 이상인 경우도 절삭유 접촉군에서 2명, 방청유접촉군에서 1명이 있었다. 호발계절은 절삭유접촉군의 경우 응답자 41명중 16명(42.1%)이 여름에 가장 많은 것으로 답하였으나 방청유접촉군의 경우 계절에 따른 차이를 보이지 않았다(p>0.05). 5. 유병기간은 양 군에 차이가 없었으며(p>0.05), 68.6%가 1개월 이내에 회복되는 것으로 나타났고, 6개월이상 잘 낫지 않는 정우도 3명(7.9%)이 있었다. 재발횟수는 절삭유접촉군에서는 1년에 수회가 응답자 15명(44.1%)로 가장 많았으나, 방청유접촉군에서는 1회로 끝난 경우가 3명(42.9%)로 가장 많았고, 전체 응답자 41명중 26명(63.4%)이 1년에 1회 이상 재발하는 것으로 나타났다. 6. 주요 발생형태로는 홍반성 구진이 절삭유접촉군과 방청유접촉군에서 각각 21명(60.0%), 6명(85.7%), 전체적으로는 27명(64.3%)으로서 가장 많았으며, 수포 형성이 각각 12명(34.3%), 1명(14.3%), 전체적으로 13명(31%)로 나타났다. 7. 처음 접촉피부염 발생시 보호구를 착용했다는 응답이 38명(86.8%)으로 대부분이었으나, 24명(68.6%)이 보호구의 종류로서 면장갑을 착용한다고 하였으며, 그 외 고무장갑이나 비닐장갑을 이용했던 것으로 나타났다. 8. 피부염발생시 치료 여부에 대해 22명(51.1%)이 약국이나 병원을 이용하는 것으로 나타났으며, 개인위생에 신경 쓴다, 별 조치를 취하지 않는다, 사내의무실을 이용한다가 각각 11명(27.9%), 6명(14.0%), 3명(7.0%)로 대부분 자비를 부담하여 치료를 하는 것으로 나타났다. 9. 피부염의 발생에 대해 느끼는 정도를 묻는 질문에 대해 절삭유접촉군에서는 16명(47.1%)이 심각하다라는 응답을 하였으나, 방청유접촉군에서는 응답한 6명 모두가 별로 심각하지 않다라고 하여 대조를 보였다. 이상의 결과, 오일로 인한 사업장의 피부질환조사 시에는 접촉 수준(빈도와 양), 접촉물질의 종류를 정확히 파악하는 것이 중요하고, 적절한 조사시기(계절)가 고려되어야 하며, 접촉피부염의 예방을 위해서는 적절한 보호구와 보건교육이 필요하다는 것을 알 수 있었다. 또한 대규모 집단을 대상으로 접촉피부염의 유병률 특히, 기간유병률 등을 파악하는데 있어, 설문 조사가 주요한 도구가 될 수 있으므로, 이에 대한 연구가 필요하다고 생각된다.

  • PDF

무독성 친환경 세정제의 합성 및 평가에 관한 연구 (Synthesis and Evaluation of Ecofriendly Nontoxic Cleaning Agents)

  • 김종천;류영;홍연희;김석찬
    • 공업화학
    • /
    • 제25권5호
    • /
    • pp.548-551
    • /
    • 2014
  • 기존 유기 세정제의 문제점인 인체 독성을 낮추기 위하여 생분해도 및 $LD_{50}$가 향상된 에테르 및 에스테르 작용기를 동시에 갖는 세정제 4종을 새롭게 합성하였다. 합성한 세정제를 한국기계전기전자시험연구원에서 국가산업표준 방법으로 분석하여 물리적인 성질과 생분해도 및 $LD_{50}$을 측정하고 세정성 평가를 수행하였다. 물성 측정 결과, 물리화학적 성질이 세정제로서 적합한 것으로 확인되었다. 세정력 평가를 위하여 $60{\times}40mm$ 크기의 스테인리스 강 기판에 절삭유, 방청유, 인발유, 윤활유를 각각 기판에 도포하여 합성한 세정제(1-4)에 침적하여 세정력을 평가하였다. 최대 5 min 간 침적하였을 때 절삭유는 96-100%, 방청유에서는 64-72%, 인발유는 59-88%, 윤활유는 72-84% 정도의 높은 세정력을 보였다. 또한 세정제(1-4)의 생분해도 99% 이상, $LD_{50}$ 2,000 mg/kg 이상의 값을 보임으로서 인체에 거의 해가 없는 친환경 세정제임을 확인하였다.

3가 크롬황산염의 크로메이트에 의한 아연도금내식성 증대 (Enlargement of Anti-corrosion of Zinc Plating by the Trivalent Chromium Sulfate Conversion Coating)

  • 이철태
    • 공업화학
    • /
    • 제18권3호
    • /
    • pp.296-302
    • /
    • 2007
  • 6가 크롬의 크로메이트 코팅제의 대체를 위한 3가 크롬의 크로메이트 코팅용액의 제조에 관한 것이다. 본 연구에서 제안된 코팅제는 3가 크롬원으로서 $KCr(SO_4)_2$를 35~45 g/L, 인산계 화합물로서 $NaH_2PO_4$를 20~30 g/L을 주성분으로 하고 여기에 금속계 황산화물로서 $CoSO_4$ 10~20 g/L, $ZnSO_4$ 10~20 g/L의 조성으로 구성된 것이다. 이 제안된 3가 크롬 코팅용액을 사용하여 pH 2.0~2.2, 상온에서 담지시간 20~25 s의 조건하에 시안아연도금체에 코팅된 피막은 염수분무시험결과 5% 백청발생까지 120 h 이상 견디는 우수한 내식성을 발현하였다.

라스와 모르타르를 이용한 데크의 휨거동에 관한 실험적 연구 (An Experimental Study on the Flexural Behavior of Deck Plates with Metal Lath and Mortar)

  • 김성배;김성진;서동민;김상섭
    • 콘크리트학회논문집
    • /
    • 제20권1호
    • /
    • pp.117-125
    • /
    • 2008
  • 국내 건설 산업 분야에서는 건설 전문인력의 부족과 건설비용의 상승으로 데크플레이트의 사용이 증가하고 있다. 그러나 최근 지하 주차장과 같은 지하구조물에서 얇은 아연도금 강판으로 제작된 데크플레이트를 사용할 경우 사용연한에 따른 녹발생, 누수에 대한 유지보수비 증가 등 여러 가지 문제점이 지적되고 있다. 이러한 문제점을 해결하기 위하여 아연도금강판 대신 라스와 모르타르를 사용한 데크플레이트를 개발하였다. 본 연구에서는 새로 개발된 데크플레이트에 대하여 시공하중과 사용하중을 적용할 경우의 휨 성능을 평가하였다. 주요 변수로는 트러스의 형태, 상하 주근의 직경, 슬래브의 두께 등이다.

Analytical model of corrosion-induced cracking of concrete considering the stiffness of reinforcement

  • Bhargava, Kapilesh;Ghosh, A.K.;Mori, Yasuhiro;Ramanujam, S.
    • Structural Engineering and Mechanics
    • /
    • 제16권6호
    • /
    • pp.749-769
    • /
    • 2003
  • The structural deterioration of concrete structures due to reinforcement corrosion is a major worldwide problem. Service life of the age-degraded concrete structures is governed by the protective action provided by the cover concrete against the susceptibility of the reinforcement to the corrosive environment. The corrosion of steel would result in the various corrosion products, which depending on the level of the oxidation may have much greater volume than the original iron that gets consumed by the process of corrosion. This volume expansion would be responsible for exerting the expansive radial pressure at the steel-concrete interface resulting in the development of hoop tensile stresses in the surrounding cover concrete. Once the maximum hoop tensile stress exceeds the tensile strength of the concrete, cracking of cover concrete would take place. The cracking begins at the steel-concrete interface and propagates outwards and eventually resulting in the through cracking of the cover concrete. The cover cracking would indicate the loss of the service life for the corrosion-affected structures. In the present paper, analytical models have been developed considering the residual strength of the cracked concrete and the stiffness provided by the combination of the reinforcement and expansive corrosion products. The problem is modeled as a boundary value problem and the governing equations are expressed in terms of the radial displacement. The analytical solutions are presented considering a simple 2-zone model for the cover concrete viz. cracked or uncracked. A sensitivity analysis has also been carried out to show the influence of the various parameters of the proposed models. The time to cover cracking is found to be function of initial material properties of the cover concrete and reinforcement plus corrosion products combine, type of rust products, rate of corrosion and the residual strength of the cover concrete. The calculated cracking times are correlated against the published experimental and analytical reference data.

Atmospheric Corrosion Process for Weathering Steel

  • Nagano, Hiroo;Yamashita, Masato
    • Corrosion Science and Technology
    • /
    • 제7권2호
    • /
    • pp.119-124
    • /
    • 2008
  • Steel is generally not corrosion resistant to water with formation of non protective rusts on its surface. Rusts are composed of iron oxides such as $Fe_3O_4$, $\alpha-$, $\beta-$, $\gamma-$and ${\delta}-FeOOH$. However, steel, particularly weathering steel containing small amounts of Cu, Ni and Cr etc., shows good corrosion resistance against rural, industrial or marine environment. Its corrosion rate is exceedingly small as compared with that of carbon steel. According to the exposure test results undertaken in outdoor environments, the atmospheric corrosion rate for weathering steel is only 1 mm for a century. Atmospheric corrosion for steels proceeds under alternate dry and wet conditions. Dry condition is encountered on steel surface on fine or cloudy days, and wet condition is on rainy or snowy days. The reason why weathering steel shows superior atmospheric corrosion resistance is due to formation of corrosion protective rusts on its surface under very thin water layer. The protective rusts are usually composed of two layer rusts; the upper layer is ${\gamma}-FeOOH$ termed as lepidocrocite, and inner layer is nano-particle ${\alpha}-FeOOH$ termed as goethite. This paper is aimed at elucidating the atmospheric corrosion mechanism for steel in comparison with corrosion in bulky water environment by use of empirical data.The summary is as follows: 1. No corrosion protective rusts are formed on steel in bulky water. 2. Atmospheric corrosion for steel is the corrosion under wetting and drying conditions. Corrosion and passivation occur alternately on steel surface. Steel, particularly weathering steel with small amounts of alloying elements such as Cu, Ni and Cr etc. enhances forming corrosion protective rusts by passivation.