• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.29-35
• /
• 2003

The Sn-based lead-free solders with varying microstructure were prepared by changing the cooling rate from the melt. Bulky as-cast SnAg, SnAgCu, and SnCu, alloys were cold rolled and thermally stabilized before the creep tests so that there would be very small amount of microstructural change during creep (TS), and thin specimens were water quenched from the melt (WQ) to simulate microstructures of the as-reflowed solders in flip chips. Cooling rates of the WQ specimens were 140∼150 K/sec, and the resultant $\beta-Sn$ globule size was 5∼10 times smaller than that of the TS specimens. Subsequent creep tests showed that the minimum strain rate of TS specimens was about $10_2$ times higher than that of the WQ specimens. Fractographic analyses showed that creep rupture of the TS-SnAgCu specimens occurred by the nucleation of voids on the $Ag_3Sn$ Sn or $Cu_6Sn_5$ particles in the matrix, their subsequent growth by the power-law creep, and inter-linkage of microcracks to form macrocracks which led to the fast failure. On the other hand, no creep voids were found in the WQ specimens due to the mode III shear rupture coming from the thin specimens geometry.

• Journal of Chest Surgery
• /
• v.5 no.1
• /
• pp.45-56
• /
• 1972

Esophageal perforation is one of the most grave prognostic problems among thoracic and general surgical emergencies which necessitate urgent operative measures. In Korea,there are still many persons ingesting lye for suicidal attempt and thoracic surgeons in Korea have more chances to deal with lye burned esophagus with or without instrumental perforation than those in Western countries. Main cause of esophageal perforation in Korea is instrumental perforation in patients with lye stricture of the esophagus during diagnostic endoscopy or therapeutic bouginage. Other causes are corrosion of the esophagus due to ingestion of caustic agents, pathologic perforation, surgical trauma, stab wound and spontaneous rupture of the esophagus in our series. Therapeutic measures are various,and depend on duration of perforation, severity of its complications, pathology of perforated portion of the esophagus and degrees of inflammation at the point of perforation. The most important therapeutic measures are prevention of this grave condition during esophagoscopy, bouginage and surgical procedures on lungs and mediastinal structures and to make early diagnosis with prompt therapeutic measures. During the period of January, 1959, to December, 1971, the authors experienced 65 cases ofesophageal perforation including acquired esophagorespiratory fistula at Dept. of Chest Surgery, the National Medical Center in Seoul, and obtained following results in the series. 1. Female were 35 cases, and peak age incidence was 2nd and 3rd decades of life. 2. Among 65 cases, 43 were corrosive esophagitis or benign stricture of the esophagus due to caustic agents, 7 were patients with esophageal cancer. and there were 5 cases of esophageal perforation developed after pneumonectomy or pleuropneumonectomy. 3. Causes of perforation are instrumental perforation in 45, acute corrosion in 7, pathologic perforation in 7, surgical trauma in 3, stab wound in 2 cases, and one spontaneous rupture of the esophagus. 4. Most frequent sites of esophageal perforation were upper and mid thoracic esophagus, and 8 were cases with cervical esophageal perforation. 5. Complications of esophageal perforation were mediastinitis in 42, empyema or pneumothorax in 35, esophagorespiratory fistula in 12, retroperitoneal fistula or abscess in 5,pneumoperitoneum in 3, and localized peritonitis in 1 case. 6. Cases with malignant esophagorespiratory fistula were only 3 in the series which is predominant cause of acquired esophagorespiratory fistula in Western countries. 7. Various therapeutic measures were applied with mortality rate of 27.7% in the series. 8. In usual cases early treatment gave better prognosis, and least mortality rate in cases with perforation in mid thoracic esophagus. 9. Main causes of death were respiratory complications,acute hemorrhage with asphyxia, and septic complications. 10. Esophageal perforation developed after pneumonectomy gave more difficult therapeutic problems which were solved in only 1 among 5 cases.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.1
• /
• pp.47-60
• /
• 2021

Hydrogen is a next-generation energy source, and according to the roadmap for activating the hydrogen economy, it is expected that industries to stably produce, store, and transport of hydrogen as well as the supply of hydrogen fuel cell vehicles will be made rapidly. Accordingly, safety measures for accidents of hydrogen vehicles in confined spaces such as tunnels are required. In this study, as part of a study to ensure the safety of hydrogen fuel cell vehicles in road tunnels, a basic investigation and research on the risk of fire and explosion due to gas leakage and hydrogen tank rupture among various hazards caused by hydrogen fuel cell vehicle accidents in tunnels was conducted. The following results were obtained. In the event of hydrogen fuel cell vehicle accidents, the gas release rate depends on the orifice diameter of TPRD, and when the gas is ignited, the maximum heat release rate reaches 3.22~51.36 MW (orifice diameter: 1~4 mm) depending on the orifice diameter but the duration times are short. Therefore, it was analyzed that there was little increase in risk due to fire. As the overpressure of the gas explosion was calculated by the equivalent TNT method, in the case of yield of VCE of 0.2 is applied, the safety threshold distance is analyzed to be about 35 m, and number of the equivalent fatalities are conservatively predicted to reach tens of people.

• Journal of Veterinary Clinics
• /
• v.37 no.3
• /
• pp.145-148
• /
• 2020

A 9-years old spayed female Maltese was referred for the treatment of mass on the right 1^st mammary gland and acute weight bearing lameness of right hindlimb. It was diagnosed as malignant mammary tumor and cranial cruciate ligament rupture of right stifle joint. Right upper regional mastectomy followed by cranial closing wedge osteotomy (CCWO) of the right tibia were planned for the present problems. Preanesthetic work-up did not show any remarkable abnormalities. Forty-five minutes after induction of anesthesia dobutamine was administered at a rate of 5 ㎍/kg/min by constant rate infusion due to gradual decrease of blood pressure below MAP 60 mmHg during surgical procedure. Despite of the increase of dobutamine infusion rate up to 20 ㎍/kg/min, blood pressure didn't recover. At the end of regional mastectomy generalized skin redness and eyelid edema were identified. Anesthesia was stopped and CCWO procedure was cancelled. To recover from the anaphylactic reactions dexamethasone and diphenhydramine were administered. After about one hour, the patient completely recovered from hypotension and anaphylactic reactions. After 4 weeks, intradermal skin test (IDST) was performed for all the drugs used during anesthesia. Only dobutamine showed positive reaction in IDST. Therefore, dobutamine was considered as the causative agent of anaphylaxis in this patient during the anesthesia. In case of perioperative anaphylactic reaction, postoperative investigation should be performed to identify causative agent and to provide safe recommendations for future anesthetic procedure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.1995-2001
• /
• 2001

In this study, a small punch creep(SP-Creep) test using miniaturized specimen(10${\times}$10${\times}$0.5mm) is described to develop the new creep test method for high temperature structural materials. The SP-Creep test is applied to 2.25Cr-lMo(STBA24) steel which is widely used as boiler tube material. The test temperatures applied for the creep deformation of miniaturized specimens are between 550∼600$^{\circ}C$. The SP-Creep curves depend definitely on applied load and creep temperature, and show the three stages of creep behavior like in conventional uniaxial tensile creep curves. The load exponent of miniaturized specimen decreases with increasing test temperature, and its behavior is similar to stress exponent behavior of uniaxial creep test. The creep activation energy obtained from the relationship between SP-Creep rate and test temperature decreases as the applied load increases. A predicting equation or SP-Creep rate for 2.25Cr-lMo steel is suggested. and a good agreement between experimental and calculated data has been found.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.6
• /
• pp.405-409
• /
• 2005

Objective: The purpose of this study is to assess the factors related to the outcome of 84 patients who underwent surgery for anterior communicating Artery(ACoA) aneurysms. Methods: The authors review 84 patients who were undertaken from January 1998 to May 2004. In the management of ACoA aneurysms, the outcome was based on several factors: Clinical condition, Distribution of hemorrhage, Time between aneurysmal rupture and surgery, Direction and shape of the aneurysm. Results: The incidence rate of the ACoA aneurysm was 35%. Seventy four patients were classified as those having a good recovery, but 5 patients suffered from some morbidity and 5 patients died. The rate of good outcome for the patients with Hunt and Hess grade was as follows 100% in grade I, 95% in grade II, 80% in grade III, IV and V. The rate of good outcome for the patients with Fisher grade was as follows 98% in grade I, II and 81% in grade III, IV. Nineteen of 22 patients who underwent early surgery were rated as good, while twenty six of 30 patients for whom surgery was delayed showed a favorable result. The unfavorable outcomes were also attributed by vasospasm or other medical problems. Conclusion: For further improvement of the overall surgical outcome: First, early surgical intervention is recommended for good grade patients. Second, active management of poor grade patients should be scrutinized with early surgery. Third, it is also important to step up the effort to minimize the risk of medical complications to enhance surgical results on top of the mainstay of prevention efforts for vasospasm and rebleeding.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.2
• /
• pp.116-122
• /
• 2003

Pleomorphic adenoma is the most common salivary neoplasm mainly occurring in the major salivary glands - especially in parotid gland, which is characterized by variable histopathologic appearances and high recurrence rate with malignant transformation according to surgical situations. And this benign mixed tumor occurring in minor salivary glands is believed to shows same clinicopathologic appearances and relatively low recurrent rate compared with the case in major salivary glands. But there are few comparative studies of large series of pleomorphic adenoma occurring in minor salivary glands which includes different histopathologic appearance, clinical characteristics, treatment methods, recurrence rate, and malignant transformation. We retrospectively studied the 54 patients who were pathologically confirmed with pleomorphic adenoma occurring in minor salivary glands, and analyzed the clinico-histopathological appearance, surgical methods, recurrent cases. The results obtained are as follows. 1. The incidence of the tumor was most frequent in 4th & 5th decade, and in female. 2. Palate(90%) including hard & soft palate was the most frequent site for pleomorphic adenoma in minor salivary glands. 3. The exact duration could not be known due to asymptomatic slow growth patterns of the tumor. 4. The mean tumor size was 2.3cm. 5. 28 (52%) pleomorphic adenomas were classified as Cellular type (cell-rich), 17 (31%) specimen as Intermediate type(equal cell to stroma ratio), and 9 (17%) as Myxoid type(stroma-rich). 6. Surgically 51 cases (94%) were showed well-encapsulated tumors, but histopathologically only 34 specimen (63%) were wellencapsulated. Therefore pleomorphic adenomas in minor salivary glands also have to be excised more widely, not enucleated. And in case of suspicious malignancy or large tumor, preoperative incisional biopsy can be applied in the center of the tumor for prevention of rupture of tumor cell, and total excision with use of frozen biopsy for detection of malignancy and confirming the excision margin, and closed follow-up according to final histopathologic results is recommended.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.43-48
• /
• 2000

In this study, a small punch creep(SP-Creep) test using miniaturized specimen$(10{\times}10{\times}0.5mm)$ has been described for the development of the newly semi-destructive creep test method for high temperature structural components such as headers and tubes of boiler turbine casino and rotor and reactor vessel. The SP-Creep testing technique has been applied to 2.25Cr-1Mo(STBA24) steel used widely as boiler tube material and the creep test temperature are varied at $550^{\circ}C{\sim}600^{\circ}C$. The overall deformations of SP-Creep curves are definitely depended with applied load and creep test temperature and show the creep behaviors of three steps like conventional uniaxial creep curves. The steady state creep rate${\delta}_{ss}$ of SP-Creep curve for miniaturized specimen increases with increasing creep temperature, but the exponential value with creep loading is decreased. The activation energy$(Q_{spc})$ during SP-Creep deformation with various test temperatures shows 605.7kJ/mol that is g.eater than 467.4kJ/mol reported in uniaxial creep test. This may be caused by the difference of stress states during creep deformation In two creep test. But from the experimental results, e.g. SP-Creep curve behaviors, the steady state creep rate${\delta}_{ss}$ with creep temperature, and the exponential value(n) with creep loading, it can be summarized that the SP-Creep test may be a useful test method to evaluate the creep properties of the heat resisting material.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.15 no.1
• /
• pp.127-139
• /
• 2002

This study was carried out to prove the therapeutic effects of BNJB on the catract. The objects of this study were CXSD mice that spontaneously eye rupture occurred from three weeks after birth and eventually generate cataract within 12 weeks. We applied eyewash made from BNJB to eyes of CXSD mice twice in a day till all the eyes of the negative control showed up the symptoms of a cataract and recorded the increasing patterns of cataractous eyes. To explained the therapeutic effects of the BNJB, We carried out the ex vivo experiment which cultivating eyeballs were offered oxidative stress condition by $0.03{\%}$ $H_2O_2$ during three days. Total co-enzyme was extracted from the cultured eyeballs and used to measure activities of catalase, superoxide dismutase, glutathion S-transferase and content of GSH. The results were obtained as follows: 1. When we treated the catalin to CXSD mouse as a positive control, it represented the delaying effect for cataract generation for 2-3 days compare with negative control. But it seems that it doesn't appropriate as a therapeutic, or delaying agent. 2. In the experimental BNJB group, Cataract formation rate was dramatically reduced by BNJB. This rate was much lower than positive group and means our new formulation for the therapy of cataract has a good potential. 3. In the analysis of individual medicines of BNJB, Mok-Jeok-Cho, Hwang-Lyun and Ha-Go-Cho didn't have a major effect of BNJB. 4. The cataract formation rate was repressed by Bing-Pyun and Jin- Joo-Boon about $40{\%}$ and $50{\%}$, respectively. We can presume that the anti-cataract effect of BNJB was caused by these two medicines. 5. When we surveyed the anti-oxidant activities of BNJB, enzyme activities of GSH, SOD, and Catalase increased about $10{\%},\30{\%}$, and 2.5 folds, respectively.

• Nuclear Engineering and Technology
• /
• v.21 no.3
• /
• pp.165-170
• /
• 1989

The strain rate effects on fracture toughness and fracture resistance characteristics of A533B-1 nuclear pressure vessel steels were examined in the quasi-dynamic test conditions through the microscopic investigation of the intense strain region around crack tip and the microroughness of fracture surface. J-value calculated from the recrystallization etch technique was the same as calculated from the modified-J when the crack extension is less than 1.5mm in a 1/2T-CT specimen. Local fracture strain was calculated from the fracture surface micro-roughness. The local strains were calculated to be the values of 1.8 and 2.0 and were much higher than the macroscopically measured values. It was nearly independent on strain rate and was regarded as a material constant in ductile dimpled rupture. The fracture toughness increased with increase in strain rate while the tearing modulus showed little variation.