• The Journal of Engineering Geology
• /
• v.15 no.2 s.42
• /
• pp.185-199
• /
• 2005

Properties of sliding materials are dependent on the lithology because debris is the product of rock weathering processes. In order to characterize transportation behavior of debris dependent of debris types, this study selected 26 debris flows over three areas composed with different rock weathering types and topographic conditions. Analyses of lithology, weathering, and topographic characteristics were performed by detailed field survey. Based on the field survey data, transportation behavior of debris was studied at the aspect of the relationship of grain size and volume of debris as well as topographic conditions. According to the study results, change of slope angle is very influential factor on runout distance of debris among the topographic factors. Because the sliding velocity and the energy of debris are frequently changed and more irregular on an undulating slope, the unout distance of debris is larger than that of an uniformly dipping slope. Runout distance of debris is also influenced by volume and grain size of debris. Volume of debris in the gabbro is four or five times larger than that of the granite area because it is controlled by the lithology. Considered with grain size distribution, runout distance of debris is longer in the gabbro area which is composed with irregular grain size bearing large corestones than that in the medium grained granite area.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.2
• /
• pp.25-33
• /
• 2021

This study was conducted to understand the deposition characteristics of debris flow and to analyze the reduction effect of debris flow damage by installing a berm. Flume experiments were performed in consideration of various channel slope and volumetric sediment concontration. In order to analyze the reduction effect of debris flow damage by installing a berm, the cases of not installing a berm and the cases of installing a berm were compared. In this study, the runout distance, total travel distance, and mobility ratio were analyzed among the deposition characteristics of debris flow. First, the deposition characteristics of debris flow according to the change of the channel slope were analyzed, and the deposition characteristics of debris flow due to the change of volumetric sediment concentration were analyzed. In addition, the change rate of debris flow deposition characteristics when a berm was installed was calculated based on the case when a berm was not installed. As a result of the experiments, it was confirmed that the channel slope and volumetric sediment concentration had a significant effect on the deposition characteristics of debris flow. In addition, when a berm is installed on the slope, the runout distance and mobility ratio of debris flow are greatly decreased, and the total travel distance is increased. This means that installing a berm delays the movement of debris flow and reduces the potential mobility of debris flow. The results of this study will provide useful information for understanding the deposition characteristics of debris flow. Furthermore, it is expected to help in the design of a berm.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.371-374
• /
• 2007

For development of landslide risk assessment techniques using GIS(Geographic Information System), this study classifies the category of socioeconomic factors. The landslide quantitative risk assessment performs first prediction of flow trajectory and runout distance of debris flow over natural terrain. Based on those results, it can be analyzed the factors of socioeconomic which are directly related to the magnitude of risk due to landslide hazards. Those risk assessment results can deliver factual damage situation prediction to policy making for the landslide damage mitigation. Therefore, this study is based on feature classification of the digital map ver. 2.0 provided by the National Geographic Information Institute. The category of factors can be used as useful data in preventing landslide.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.323-323
• /
• 2011

산지가 많은 국내의 지형적인 여건은 토지의 이용에 다양한 영향을 준다. 산지주변에서는 능선을 따르거나 가로지르는 도로가 건설되고 산지계곡 하류에 발달한 선상지에는 가옥이 들어서거나 경작지로 활용되고 있다. 이러한 환경에서 우리나라는 지난 10년간 사면재해로 인한 사망자가 전체 자연재해에 27%에 달하고 이는 집중호우가 발생하는 시기에 집중되고 있어 이에 대한 연구가 필요한 실정이다. 본 연구에서는 호우 발생 시 산지하천에서 발생하는 토석류의 흐름특성을 연구하기 위해 국내 외 토석류 실험장치에 대한 조사와 토석류 실험장치를 개발하여 토석류발생 및 도달거리 예측을 위한 실험을 수행하였다. 토석류 실험장치는 수조길이 5.5m에 10-40cm의 가동폭 그리고 상 중 하류의 3단계 경사조절이 가능하며 토석류 퇴적장치를 결합하여 도달거리 및 퇴적분포를 계측할 수 있다. 토석류를 발생시키기 위해 토사공급장치 이용방법, 하상퇴적토사를 이용한 방법 등 다양한 시도를 하였다. 토석류 실험장치를 이용하여 발생시킨 토석류의 특성과 퇴적장치 에서의 도달거리를 측정하여 유량공급과의 상관관계를 분석하였다. 이러한 연구결과는 토석류 재해지도의 작성이나 토석류 해석모형의 개발에 필요한 기초자료로 활용될 수 있다.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.1
• /
• pp.55-62
• /
• 2017

A Lahar on the volcanic area is one of the important hazard that can cause the loss of life and property damage. In order to estimate lahar hazard area at Ulleung Island, we simulated lahar inundation area using Laharz_py. We assumed 400 m of additional elevation for DEM to draw proximal hazard zone of Ulleung Island that H/L ratio were selected 0.45 and 0.5. And lahar volumes for simulation were estimated to 30,000, 50,000, 70,000, $100,000m^3$, respectively. In the results, 5 streams are located near a proximal hazard zone, Jeodong (east), Sadong and Okchon (southeast), Namyang (southwest), and Chusan (north), Nari basin is also considered that has a possibility of lahar during downpour. The results of this study can be used as basic data to make a hazard map for reduce the damage that can be caused by volcanic hazards occurred on Ulleung Island.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1227-1240
• /
• 2014

Abandoned mines often cause environmental problems, such as alteration of landscape, metal contamination, and landslides due to a heavy rainfall. Geotechnical and rheological tests were performed on waste materials corrected from Imgi waste rock dump, located in Busan Metropolitan City. Debris flow mobility was examined with the help of 1-D BING model which was often simulated in both subaerial and subaqueous environments. To determine flow curve, we used a vane-penetrated rheometer. The shear stress (${\tau}$)-shear rate (${\dot{\gamma}}$) and viscosity(${\eta}$)-shear rate (${\dot{\gamma}}$) relationships were plotted using a shear stress control mode. Well-known rheological models, such as Bingham, bilinear, Herschel-Bulkley, Power-law, and Papanastasiou concepts, were compared to the rheological data. From the test results, we found that the tested waste materials exhibited a typical shear shinning behavior in ${\tau}$-${\dot{\gamma}}$ and and ${\eta}$-${\dot{\gamma}}$ plots, but the Bingham behavior is often observed when the water contents increased. The test results show that experimental data are in good agreement with rheological models in the post-failure stage during shearing. Based on the rheological properties (i.e., Bingham yield stress and viscosity as a function of the volumetric concentration of sediment) of waste materials, initial flowing shape (5 m, 10 m, and 15 m) and yield stress (100 Pa, 200 Pa, 300 Pa, and 500 Pa) were input to simulate the debris flow motion. As a result, the runout distance and front velocity of debris flow are in inverse propositional to yield stress. In particular, when the yield stress is less than 500 Pa, most of failed masses can flow into the stream, resulting in a water contamination.

• Economic and Environmental Geology
• /
• v.50 no.4
• /
• pp.277-286
• /
• 2017

Mt. Baekdu which located the border of North Korea and China, is known as a potentially active volcano in a typical mountainous terrain. A lahar on the volcanic area is one of the important hazard that can cause the loss of life and property damage. In order to comprehensively address the impact of lahar hazard at Mt. Baekdu, we simulated lahar inundation area using Laharz_py. We assumed 750 m of additional elevation for DEM to draw proximal hazard zone boundary (PHZB) of Mt. Baekdu that H/L ratio are selected 0.10. And lahar volumes for simulation were estimated to $1{\times}10^6$, $5{\times}10^6$, $1{\times}10^7$, $5{\times}10^7$, $1{\times}10^8$, $5{\times}10^8$, $1{\times}10^9m^3$, respectively. In the results, 15 streams are located near a proximal hazard zone boundary, Amnok (Yalu) river (south), Toudaosonghua river, Jinjiang river and Huapi river (west-southwest), Songjiang river, Xiaosha river, Caozi river and Sandaosongjian river (west-northwest), Toudaobai river, Erdaobai river and Sandabai river (north), Wudaobai river-1, -2, -3 (northeast) and Duman (Tumen) river (east). The results of this study can be used as basic data to make a hazard map for reduce the damage that can be caused by volcanic hazards occurred on Mt. Baekdu.